Search the Community
Showing results for tags 'mitsubishi fx series'.
Found 403 results
-
Hello, since they redesigned the mitsubishi FA website I am unable to find software updates. Is it my fault or did they forget to put them in? Thanks
-
I have this setup: FX3G CPU connected to GT2103 through RS422 (CH1). GT2103's ethernet port connected to LAN and set up as modbus TCP slave (CH2). I want to read/write PLC word devices using a modbus TCP client, from a PC. The HMI is acting as a gateway between PLC and PC. I used the Device Data Transfer function to send PLC's D register values to GT's internal GD registers. D0....D9 ==> GD0....GD9 After some tries, I get valid response from the modbus slave. Reading the holding registers 0....9 (40001....40009), I get only zero values. Those registers can be written back with different values, correctly. I'm sure I didn't understand correctly the modbus address mapping to GT's internal memory. Can anybody help me? Thank you.
-
how to use device net in FX5U SERIES PLC WITH FANUC ROBOT DEVICE NET CARD A20B-8100-0490 /03B
-
Hello! I just recently started learning about PLC's at University. While using Gx Works 2, how do I turn on auto complete for existing variable names? With this I mean, after creating a variable, for example bSystem_Started, if I want to use it again, what setting do I need to change so that by just typing "bSy", a pop up appears saying the whole name "bSystem_Started", so by just pressing enter it auto completes. Thanks in advance, Greetings, Patrick.
-
Hello, I got problem with melsoft GT Designer 3. I created a project and i must go threw recipes. I think I did everything well but my Record No. doesnt work as it should... https://drive.google.com/drive/folders/1p06cnkcfnmodmuLDfrhlshtlYgbUsFnj?usp=sharing Here is video with presentation as it works and GTX file. It have to be done with this kind of recipe. I dont want standard recipe table I think its pretty easy and i have small error Thanks
-
hello everyone, I using stepper 17HS2408, microstep driver, modul motion QD75D2, PLC QD3UDV,, i've been trying to use program Absolute in axis 2. When I trigger the command to run absolute program the current value is running but the stepper motor still not moving, is there any suggestion about this?
-
Question. After install 3 months ago...What would cause a plc module to stop working during production, not let people apply settings and revert back to old settings and permeters. Using some Intelligent design functions. Also it would not let the backup be applied.
-
Hi everyone. I need help with iQ-R system. Is it possible to connect an additional expansion bus to an existing system without powering down? Also, can I install new I/O module (RX40C4) to an existing system at hot state (like a hot swap)?
-
Hi, I have basic experience with PLCs but have a degree in electrical engineering. I have landed a job which requires me to advance my plc knowledge. I am based within the UK and need some advice on how to go about a solution to a problem. The site I am doing this for needs a site managment system. The site is within food production, this would be monitoring of mostly trips and faults within a wide range of industrial equipment (Pumps, compressors, fridges). The site is mostly Mitsubishi and would like one centralised portal within the workshop to view all of the equipment availability. Thank you.
-
Hi all! How can I use two AB phase encoder at the same time. I use Mitsubishi FX1N PLC, and I would like to use a high speed counter. I think the plc has 6 high speed counter input, but I cant use only one at same time.
-
Hello everyone, may you all bless with the best. Can anyone please help me on connecting and programming In Modbus rtu INVT CHF-100A vfd with FX2n having rs485-bd moblue. I want to connect 11 vfd and one fx2n plc also
-
How to connect two NB HMI's to NX102 PLC via Ethernet
NatC posted a topic in NJ Series / Sysmac Studio
I am new to automation systems and devices and I just want to know how to connect two HMI's (each one would control different things) to one PLC using Sysmac Studio and NB-Designer via Ethernet. The model of the PLC is NX1029020 and the HMI's are one NB10W-TW01B and an NB7W-TW01B. I searched for info about this topic online but I couldn't find anything that worked for me, I saw an article from OMRON where they connect two NB's to the CP series, but in my case, NB designer doesn't allow me to insert more than one HMI in the same project, I also found something similar on a youtube video that gave me an idea about how to connect multiple HMIs exporting the pks file and importing it to another HMI project but I still can´t figure out how to add both to my PLC. I would thank you a lot if you could help me with this because I know it's not a rare implementation, just I haven´t found the right way to do it. I also leave the links to the Omron article and the youtube video I found. https://www.myomron.com/index.php?action=kb&article=1554 https://www.youtube.com/watch?v=rXx5lut7G9I -
I am having problem working with Mitsubishi FX5 PLC. How to send two bytes data into one word. I want to send first byte into lower word and second byte into upper word.
-
I am having problem working with Mitsubishi FX5 PLC. How to send two bytes data into one word. I want to send first byte into lower word and second byte into upper word.
-
i wana connect gs2110-n with a2ushplc-s1with rs422 icant find diagrn wireing ? can you helo me please...
-
I have plc mitsubishi A2USHCPU-S1 and there is already a program in it. The problem is, the analog input data doesn't want to be saved. How do i find the analog address instructions? Can anyone help?
-
Can someone help me how to transfer D memory in gx works 2 but only 8 bit (Mitsubishi D memory is 16 bit cmiiw) ?
-
Hello, I want to know, if it is worthwhile to transfer from Q series to iQ-R? Currently our equipment is using Q series, which ss a vacuum coating equipment with about 10 power instruments, 20 gas controllers, and pumps and so on. As for the analog and X, Y points, Q is quite capable. I can not see any advantage to switch to iQ-R, but some people want to. So I want to know, 1. will Q be outdated in the near future? 2. will use iQ-R cost much more than Q? including peripheral units. 3. has iQ-R really been widely adopted? 4. thoug iQ-R may be powerful, I think use multiple middle size CPU's can be more advantageous, is this right? Many thanks in advance. Ting
-
I'm attempting to look at an offline PLC program to see device values (Ts, Ds, Ms). Is this even possible? Are device values saved when saving a program online? Program is for a Mitsubishi FX3U. Using GX Works2 v1.601B. Win10-Pro OS on the computer. I've an AB background (several decades), but only a couple weeks with Mitsu. Unfortunately, the person who originally wrote and maintained these programs isn't available. This is an easy process with AB, but I just hit walls in the Mitsu IDE. Can anybody help?
-
I have a huge confusion regarding the retentive timers on FX3GE. According to the programming manual for FX3G(image attached), all retentive timers use the EEPROM. This is very confusing to me because the retentive timers are modifying the measured time constantly in an EEPROM register and EEPROM type of memory is known to be write limited. After a couple of million write cycles the EEPROM registers burnout. I've experienced this myself by constantly using the T250 and after a while it became unusable. The timer stopped counting time after some time. This leads to my decision that retentive timers on FX3GE PLCs are something that should бе used only on rare occasions so as to avoid EEPROM memory burnout. If this is true than the real question comes in: What is an alternative for using retentive timers on FX3GE when you want to measure time between two events. The instruction TTMR for teaching timer is appropriate however this instruction does not exist on FX3G series.
-
Could you display text data from sent from hyperterminal on a mitsubishi GS2107 HMI? If you type in hyperterminal the text should be visible on HMI by connecting it through RS232 port. Can this be done without using PLC
-
how to use function (prun)
-
Hi I'm new to GOT2000 Hmi and I have a problem about creating recipes on (GT2107). Do I need sd card or usb memory stick to save recipe or I can save it in inside memory of hmi? Can someone told me how to do it step by step cause I only have errors when I want to save or load recipe. Thanks in advie
-
HELLO EVERYONE I am having problem writing in A1S68AD program, please help me out. My system configuration is as :- 1. A1S POWER SUPPLY 2. A2SHCPU 3. A1SJ71AT21B 4. A1S68AD 5. A1S62DA 6. A1SX81-S2 7. A1SX81-S2 8. A1SX81-S2 9. A1SY10 10. A1SY10 11. A1SY10 12. A1SX80-S2 13. A1SX80-S2 14. A1SY10 This is my existing configuration. But now there is one more slot empty and now i want to add one A1S68AD CARD in the empty slot, i tried writing the program for this card, but plc gives me error. SO, anyone can send me the program with addresses for this card. It will be very helpful as I am new to this A series Mitsubishi PLC. AND HERE BELOW IS THE ATTACHED EXISTING PLC PROGRAM AND SYSTEM IMAGES. PLC PROGRAM.zip
-
Good day! They asked me to make an ethernet communication between 2 mitsubishi Q03UDE PLCs, without including an additional ethernet module, the truth is I don't know where to start, I would greatly appreciate your help.
