Search the Community

Showing results for tags 'mitsubishi fifo'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 347 results

  1. Servo motor - vibration issue

    Hi I'm facing vibrating issue in servo motor (11KW) used in x axis, it makes noise while it stops after positioning. While positioning happend it operates smoothly, in the stand-by position only it starts vibrating. I'm using manual tunning mode (Abnormal noise occurs in jog operation and stand-by position only)    
  2. GOT 2000 Buil-in Memory exceeding

    Hello Everyone I have an issue with a  Got 2000, im updating and adding some screens in  a old  HMI application with size was about 47 MB,  as im still updating i wanted to test the application  which now sizes about 52 MBbut is not possible due to the shortage of  ROM and RAM, what can I do in this case as the application must be in the built-in Flash memory which is very limited?   Thank you in advance
  3. Proface with Serial Printer

    Dear Sir, Good day. I facing difficulty on using proface to print out the data using serial printer. I did follow all the instruction on proface reference manual but still fail to print out anything. Anyone here having experience on this issue? Thanks. 
  4. Hi all,  I want to ask some questions regarding Ethernet Communication with FX3U PLC series. I have 2 PLCs of FX3U series (FX3U-48M and FX3U-64M) and I want to monitor its data (input and output) using ethernet communication in real time. My questions are: 1. Does FX3U PLC have ethernet port so I can connect it directly to my Laptop/PC? 2. If no, do I need to use FX3U-ENET-ADP and can it be used for 2 PLC or only 1? 3. What software do I need to use to configure the communication between PLC and FX3U-ENET-ADP? 4. Does this configuration change the existing PLC program? 5. Can i transmit the data wireless-ly using some kind of ethernet to wifi adapter and what additional hardware do i need for that?  
  5. Hi all  I need help with communication between Mitsubishi L06CPU-P with Siemens S7-1500 by Modbus TCP. It's necessary to send data from L06CPU to S7-1500, but I don't know anything about mitsubishi and gx works2.  Picked up some pics how I did it, but I didn't verified how it works. Can anybody help me with this? https://ibb.co/8KDmg5x https://ibb.co/Jm8shCx   edited: I also found LQnUDEModbusTCP_GW2_with_FC_V120 library, but how it works I dont know
  6. hello dear team, im trying to make a back up for some FR-E700 with the FR CONFIGURATOR SW3 but when i start the communication with the USB cable the software cant recognize any port by the way im using windows 10 in my laptop and when i check the devices administrator it doesnt shows in USB ports the drive info just in other devices and in details shows: "USB device was not migrated" does anyone know what can i do?
  7. Hi,     I am trying to establish communication between master and slave through modbus rtu rs485. But I am experiencing error code 7378h. I already tried to make the values of Request Interval Timer from 100 to 200 and Broadcast Delat Value from 50 to 100. But the error still persist. Any tips how to solve this issue? There is no error on the slave evices.
  8. Hello everyone! I've installed GX works 3 according to the instructions in "https://plc4me.com/gx-works3-v1-308q-mitsubishi-full-real-100/". I don't get any errors, I can run the PLC and simulate completely OK. In the communication test, when the configuration is missing some components in the module list: Input, output, I / O module,... (https://ibb.co/ZVMcmQn) I hope you can answer for me?
  9. Hi All! Can anyone help me regarding the following logic: 1. I have four Silos and one filling station. 2. The filling of silos starts on the bases of silo demad (i.e demand is a digital signal that comes when silo is empty) 3. I have to fill all silos according to their demand 4. Whose demand is first that is filled first 5. for e.g if all four silos are empty they all generate a demand signal. 6. If Filling of silo 1 is done and filling is in progress at silo 2 after that filling will start  in silo 3 then silo 4 as they are empty 7. In the mean time  if silo 1 empy again and filling is in progress at silo 2. The system must fill silo 3 and 4 first then go to silo 1  8. It means which demands first that is filled first (first come first serve)   
  10. Dear members ,  1.)I have sensor which i read it from analog input (0-10v)  specific value and i will pas it via analog output (0-10) to controll VFD for air spped controll .  so i'd like to keep specific value for example i will set value 260  , so if analog read  les that this value than analog output increase voltage to analog output , if analog read more than this value output decrease voltage .  2.) i have Digital to analog register D8096 which 0 value means 0 volt and 4090 means 10v , so when i need to pas value to i make MOV D200 D8090 , is there a posibility to limit write value to D200 to not pass 4090 ?
  11. Q03UDVCPU Modbus Setup

    Hi Guys, I need help to set up modbus tcp/ip parameter for Q03UDVCPU, i want to use the predifined protocol and built in ethernet port. do you guys have some usefull references how to setup modbus tcp/ip, or is there any example program from mitsubishi? Thanks
  12. Designed a SCADA System using VB.NET. Everything working fine but coming to performance getting 2 to 3 seconds delay. Using FX3U32m Plc with ENET Module for Data reading and writing. I am having 200 addresses to read. Using MX Component as communication interface between PLC and SCADA. Is there any alternative or solution for this problem. Using one timer to read all data and update properties based on received data.    Thank you..
  13. GX Developer Comment

    Please help how to set the language I'm using Windows 10, the comment and program origin is from China. Im using GX Developer sorry I dont know why I cannot attached a photo.
  14. Hello Members. I am trying to read Counter values from FX3U PLC using VB.net AxactUtlType Library. But i am not getting those values from PLC. I am getting Memory and Analog data but not Getting Timer and Counter Data How we read that data? Thanks in advance. 
  15. How to connect + Program wire encoder

    Hi all, I am not a PLC expert but can find my way within the program and would like to develop much more. For work (We sell industrial bandsaws) we have purchased a Posital Fraba wire encoder, and we would like to hook it up to our Mitsubishi FX3G PLCs to measure at what height the saw bow of the bandsaw is at that moment. Unfortunately I have little experience with connecting these things, as other encoders used in our machines are pre-installed by our factory. Below is described what functions the wires have. What I thought was the following: Pin 1 goes to an input of the PLC Pin 2 goes to + (or 24V) Pin 3 doesn't go to "Ground" as they describe, but instead to - (or 0V), which is technically ground Pin 4 and 5 we don't use, correct me if I am wrong. The saw bow goes up and down only, and I thought we don't need to use these wires.   I connected it like this, connected wire 1 to X0 on PLC and just to test I made the program read:   M8000 ------------------------------ C235 k99999   But the value stays 0, whether I pull the wire or not. So something is wrong, but what, I really can't figure out. Hope someone can help!  
  16. Hello everyone, As the title suggests I am trying to display on a GOT1000 the real time frequency that the inverter is running at. I have attached my CC-Link settings and the associated programming as well. I tried using the example program from Mitsubishi but I got lost. From my understanding I should be seeing the output frequency in W3C4 however, I am not receiving any data. Any help would be appreciated. 
  17. Mitsubishi fx5u SFRD instruction

    Dear sir,  Good day. I using SFRD instruction to read all the value stored when the sensor trigger. When the SFRD instruction is end(whe the word device number goes to 0), it will move the value to my store value and change my store value.  May I know how to stop it to overwrite my store value?   
  18. Hi every one ! I cannot use register D128 - D255 in the program when I create a program that uses the Block function in the PLC mitsubishi FX1S, it gives an error :  A device of the device range set in the device/label automatic-assign setting or a device which cannot be used due to system reservation is being used.Help me,Thanks !
  19. melsec medoc error

    Hi Mr.PLC Members, I have Mitsubishi FX16MT unit, I'm trying to transfer programs to it using melsec medoc version 1.64b but I can't  I'm receiving error "no reply from PLC system",I'm using 25 pin to 9 pin cable and I tried also to connect it with usb to serial cable but the same error appeared  my setup: PLC system        FX Bit rate                 300 word length          7 parity                    Even stopbits                 2 "windows XP" Attached are photo of my unit with my cables and the error of the program  
  20. GX Works3 problem

      Hi Guys, Can you help me out with this question The servo motor connected to axis-1 rotates in the forward direction when the M1 button is pressed, and in the reverse direction when the M2 button is pressed. When two buttons are pressed at the same time, the engine stops after 5 seconds. Write the program that performs this process with GX Works3. 
  21. GXWorks 2 Comment Translation

    Hello, I was wondering if any of you have experience translating comments. To be more specific, I have been tasked with translating all of the comments in my plant from japanese to english. We have many different series of PLCs, but they are all mitsubishi, and I will be using GXWorks 2 for 99% of them. I had the idea of writing the comments to a CSV file, Translate them there, and then just read them from CSV back into the project. I have tried numerous methods, but it seems the CSV loses format and isnt able to be read back into GXWorks. Some of these comment files have almost 10,000 comments. Do any of you have any suggestions on the best way to translate these comments over, in a more automated way than manually one-by-one.  Thanks in advance for any support you can provide!
  22. Hi All First ever post so forgive me if I do anything wrong. My customer has given me an FX5Uc PLC and a Delta DOP-B03S211 HMI. Comms need to be via serial. Ethernet not an option. I have configured the HMI as the Delta DOP datasheet(see attached) I have configured the PLC as: - MC-Protocol - 19200,8,1,Odd I however get an HMI error: - ########################################## COM 1 STATION 0: COMMUNICATION ERROR 3. READ ERROR No Response from Controller ######################################### I have created a simple page on the HMI  consisting of a push button (M reg) and a numeric display (D reg). When pressing the push button I can see the change in the PLC. (Transmission good) Any change of the D reg in the PLC is not reflected on the HMI. Confirms the message. I have tried all combinations of settings on both side but no joy. The PLC seems to be happy as it receives and transmits ok with no errors. Can any one see what I am doing wrong? DELTA_IA-HMI_Mitsubishi FX5U_CM_ENG_20170728.pdf
  23. Hi all! We have a problem with a Mitsubishi system. After switch off the machine in home position and back on, it resets the servo encoder value to 0.  I checked the servo parameters, and the Absolute encoder is enabled, the ext. battery is ok and no zero reseting in the program ( I think...). Is there a parameter I should check or some setting in the intelligent module? The system consists Q01CPU, QD77MS2 im., J4 200B amp with 6v battery, and HG-SR152 motor.
  24. Hello There I need to set up communication PLC to PLC ( R08CPU to Fx5CPU) but i dont have the modbus library for  the R08  Does anyone have the library? or where can i get it? thank you.
  25. Connect remotely to an OPC Server DA

    Hello, I need to connect remotely to an OPC Server DA. In my PC I have installed several OPC Clients but when I try to connect to the server (therefore located on another machine) I get an "access denied" error. How can I authorize the exchange of information between the 2 machines? Thanks