Search the Community
Showing results for tags 'mitsubishi communication'.
Found 515 results
-
Good afternoon, I have a problem in an application for a rotary knife, I'm using a MR-JE-B servo to make this movement, while my material is powered by an inverter connected to a modbus rs485 network, with a 5v encoder connected directly in motion. I'm having some problems and I think it's my cam curve. I have a very high refeneration, and the system doesn't obey the size of the length I want the cut. It always cuts the same size, regardless of the configuration I use, it always cuts to 245mm. Put some photos, how are my settings. Grateful in advance, if anyone can help me. Dover_roll_1-Motion-configuração_jog_manual.gx3
-
Hey! Is there any possibility to acces the PLC variables in GXWorks from another program? Like I want to read and write the I/O-s or Merkes in the Mitsubishi PLC from another program Could someone help me with this? Thank you!
-
Hello! Is there any possibility to connect a Mitsubishi PLC to a program like Siemens Plant Simulation? With Siemens PLC I can do it through OPC UA protocol, or Shared Memory with SIMIT, or stuff like that. But I would need to do it also with Mitsubishi PLC. Can I use for example OPC Server? I couldn't find out, if Mitsubishi PLC-s have that function built-in. (I have a L02 and a FX3S COU, either of them would be great.) Thank you!
-
My HP laptop will lose communication with Mitsubishi PLC occasionally after removing ethernet cable to download from WiFi. Our company limits the ability to use the wi-fi when I have an ethernet cord connected to my laptop, it has to do with security. If I am connected to the Mitsubishi PLC, then want to download another file from our autosave, which we connect through the wifi, I have to remove the ethernet cord from my HP laptop to enable the ability to go wireless, however sometimes when I attempt to go online with the PLC after I re-connect my ethernet cable, GX developer will not allow it. I can ping the plc and even go online with other PLCs on the network, but for some reason, the one I was connected to will not connect. I restart my computer and even re-download the file again from autosave but no joy. Its not until an unknown amount of time that it will allow me to re- connect, its as if I lose the socket connection on the plc and it needs time to reopen. I talked to our IT department and they have no ideas. Thank you in advance for any help on this matter.
-
Hello. I have a system in which an A1S68AD card is used, that card has been damaged . I replace that damaged card with the new A1S68AD card with same wiring and same setting of dip switch. But at channel number 3 there is a RTD connected which gives 4-20 mA signal. But in Plc at channel number 3 the data register is showing -2400 fixed value all the time and in actual the temperature is varying. But PLC SHOWS FIXED VALUE OF -2400. PLEASE HELP ME OUT.
-
I am working on project where I need to program delta PLC to receive ASCII code from scanner. I anyone know how to program it helpls me alot.
-
Dear all, I have a FX2N-20MR chinese semi-clon of a Mitsubishi PLC. It has only a serial DB9 port that cannot be removed or exchanged (which is possible in the Mitsubishi original PLC). I wonder if I can make a simple SCADA system using that port and just one computer. I am reading this post: https://forums.mrplc.com/index.php?/topic/9653-fx-series-and-modbus/ And I am wondering how I can do what it is suggested there in the second message: to use a free FB block, available in GX IEC (but not in GX Developer), which will communicate modbus via a standard RS232 BD board. Later on it mentions a library called ModbSFX. That message is from 15 years ago so I am wondering if now there is some other way to do it, perhaps some other software has that functionality? I don't have GX IEC. I am a student trying to make a project so I would like a cheap and simple solution. Any help to do so will be very welcome. Thanks Regards Marcelo
-
Hi..looking for some help....trying to connect to an A1Scpu using an old DOS based version of 'medoc'using serial port..what lead do I need to connect between pc and plc cpu?...have tried sc-03 lead using pc 232 cable but doesn't want to connect...tried changing budgets rate etc with no success...I also have an sc-09 lead if usable?
-
NC (Normally Closed) contact not working on mitsubshi HMI
ClaytonOLeary posted a topic in Mitsubishi
Hi guys, I am using a GT2107-wtsd HMI and a FX5U-32M PLC with gx works3 and designer3, i setup some simple ladder code to test that everything works, but i cannot get a normally closed contact to open when i press the button on the HMI and make the light turn off? screenshot below shows the code and the HMI buttons, when just looking at the HMI screen, all lights should be off with the exception of light number 2 as it is conected to a Normaly closed contact and i want it to open when i press the button on the HMI beside LT2 (light 2). I cant seem to get it to work.. please help, thanks. -
Hello, I am new to the programming of logic controllers. I have a Chinese FX3U 24 inputs and outputs with analog in and outputs. I am trying to teach myself the basics of the programming but I am stuck at the analog part. what I am looking to do is create a program so that when a 12v battery bank voltage drops and rises it can trigger other outputs. I have a voltage divider which outputs 1/5 of the input. Thanks for your help in advance. Ben.
-
Hello All, I am college graduate student and I know little bit of cx-programmer for modifying existing program. I have master CJ2M CPU34 PLC connected with three CP1L PLC. All 4 PLC are connected via hub through Ethernet cable. I want to read/write some memory data to/from PLC through Python programming. As I am new to PLC and Python I have not much idea regarding omron PLC and python communication. So is it possible to connect python with master/slave PLCs directly? If yes then how can I communicate? I was trying with cpppo library to connect with PLC but I could not connect it. I have attached the master PLC communication setup for the reference. Any kind of lead/help is appreciated. Thank you in advance. -Yash
-
Hey guys, I am new to mitsubishi software and hardware and i need help connecting to my PLC. My setup goes as following: PC to HMI Via USB HMI to PLC via Ethernet the HMI is a Mitsubishi Electric GOT2000 Gt2107-wtsd and the PLC is an fx5u-32M I dont know how to go about connecting to the PLC so that I can setup buttons and light to make sure everything is working fine, I dont have a full understanding of GX Works 3 and Designer 3 so this is why I am looking for some help please and thank you! pictures below of the whole system.
-
Hi guys, im just looking for some help if possible, I am trying to setup a HMI (2107-wtsd) but GT Designer3 does not have this model nor does it have any 2107 models in the GOT type dropdown. How can i get my model to show? I have tried setting the GOT type as a G2105 and the GT softGOT2000 and these did not work, the HMI is on a white screen with install package data but i cannot do this if it is not in the GOT dropdown correct? I have attached some pictures to show. the HMI is connected to the PLC via ethernet and the laptop is connected to the HMI via usb I am very new to this so we are using test benches so if anything looks wrong i am very sorry
-
Hi, I am facing the strange problem with QCPU (Q03UDE) Controller, I have multiple modules in my project ( Analog, Modbus & Digital Modules) but after some time a random error comes and all my analog Chanel values hold the last values, meanwhile controller does not show any error in the diagnostic tool. After rebooting the PLC power Chanel values start to update. This thing happens randomly. Kindly help me. Thanks in advance
-
I'm trying to simulate the proface HMI and my ladder program using the MX component " communication setup utility". I followed all the steps on a tutorial vid however an error pops'up (check the attached file). i was wondering if you can help. Thanks in advance.
-
Hello Mrplc's members I have a Korean version " goldsec Moj2" of Mitsubishi plc A0j2 I need to know the right software for it And how to get it I tried GX Developer but it didn't work because it have only A0J2h type And I tried melsec medoc (version 1.64) but it didn't have A series CPUs
-
Dear Anyone. Anyone can help me. How to communication two plc Q SERIES MITSUBISHI.With QJ71E71 100.It Can Read/write .Can Show me. example instruction command ladder.or parameter CPU 1.D0 to d300. CPU 2 D400 to D700. Two Plc can Communication read / write data register. Thanks you for your attention.
-
Hi!! i was wondering if you could help. I'm currently working on my final year's project, in which i have to recreate a backup file of a LADDER program so i can transfer it later after i add the EEPROM extension. if i transfer from my computer to the FX2N-32MR the ladder program, does it get saved in the EEPROM or RAM?
-
Hi, I have the following configuration where 4 PLC panels, with each having a Q12PH CPU and QJ71E71-100 module. All these QJ71E71-100 are connected to a HUB using straight cable. From the HUB one connection is going to an I-Fix SCADA which is already communicating with all 4 PLCs using MC protocol. I want to send data from 3 of this PLCs to the 4th PLC in the same network using fixed buffer communication. Can anyone provide a sample program for the same. Send and Receive side. I am using GX Works 2 for programming. Your help is very much appreciated.
-
Hi, we have a FX3U 128 PLC. I connect 24V to COM and all the output in the partition Y0, Y1,.. have 24V even if some output are ON and some are OFF. Why?
-
Hello everyone, Can you help me to solve of my problem? I have one type of servo driver Matsutame ALX series. Driver is using controller of MITSUBISHI. I need to change data point using my console, but when i try to connect to the driver, console always display message "Connection Timeout" . Maybe you have the same problem of me, please advise sir. Thank you.
-
How to use RTU_Master, Get_Bit_Mbus, Put_Bit_Mbus, RTU_CRC16 to process data from RFID reader? I want to take an RFID input an process its data to run a particular rung, any alternative option is also welcome. Thanks in advance.
-
Hi there. Recently I've experienced problems when connecting to a S7-300 PLC via MPI/PROFIBUS. I use a PG with CP5711 processor. The thing is that I'm able to connect when I plug the 6ES7901-0BF00-0AA0 cable (male to male) directly to the PLC connector, but when I try to do connect to a PLC that has any device connected to the DP port (let´s say an inverter or HMI) I get 33:17075 error. PG/PC Interface it's correct, in fact another PG with the same configuration is able to connect through the already connected DP device's cable. Station number and transmission rate is all correct. So I tried the Simatic NET Diagnostics Test and I got error 0x0313 and since the mentioned parameters are correct I refered to this link: How do Diagnostics and Remedy work in STEP 7 when an online connection with the CP... - ID: 11492532 - Industry Support Siemens Where they say the following: I've searched for this readme file but can't find it, and there are no useful results when looking for it on internet. Why am I able to connect directly to the PLC but not when another device is connected and I have to use the female connector of the DP connector itself? Should I try to reinstall CP5711 drivers? According to Windows, I got the last drivers for the CP. Thanks in advance and I hope you can help me!
-
Hi Experts, I would like to know is there any possibility to make a switch that can make exponential increment to a data. i know how to make a switch to increment data in fixed intervals with a switch but im trying to make a switch when you press it continuesly it should increase the gains rapidly over time. is this possible and if yes can someone explain me how? im attaching a sample image how i want to make two buttons to increase and decrease a data. thank you in advance guys. kind regards, sathu.
-
Hello, Any one have idea how to read and write variable for Schneider tm221 plc with Modbus function codes 3,6,16. I attached file for power supply communicator with registers, I need to adjust power supply from 25% up to 100. Please need help. Best regards, Chyngyz Modbus OPERATING INSTRUCTIONS.pdf
