Search the Community
Showing results for tags 'mitsubishi communication'.
Found 515 results
-
Hi can anyone help me to undestand more about modbus RTU between fx3u with optidrive e3 ?? I'm using rj45 with fx3u 485adp-Mb for the connection. Then specially in making the ladder program in Gx Works 2. I'm stuck understand the command code there. I'm first time using this. Please help me. Thank you.
-
Hye, I new in this plc understanding. For now I have this one ladder diagram that created in mitsubishi GX Developer that I use in winding machine as its plant. But, I have to make the FUNCTION BLOCK DIAGRAM for this part in CX Programmer. Can anyone help me how to construct the FBD in CX Programmer from this ladder diagram understanding . And did it is actually the counter function ? *the picture showed the ladder diagram*
-
Versamax PLC with Simatic Basic Panel ktp1200dp
HossMoh posted a topic in Allen Bradley / Rockwell Automation
Hello i have a versamax icu200udr064 and i want to connect it with simatic basic panel ktp 1200 dp both support modbus rut but the problem is that i cant find GE communication driver on the tia portal by whom i program the HMI. One more thing is that i found a communication driver for modbus rtu but the tags addresses are in the standard form for modbus, so is there any solution for this? thanks a lot . -
Hi, I'm trying to set up a TCP communication between a Q03UDECPU and a Beijer E110 panel I've tried both TCP and UDP as "communication mode" in E-Designer. nothing seems to work. What I'm I doing wrong Se attached files from E-designer and Gx IEC Developer
-
Hello I downloaded a .mer file on the Panel view 1000 but it shows errors on the display graphics. i have configured the Rslinx communication several times by selecting the rigt PLC in Design and Runtime mode. I am using Facotry Talk view 8.20 and creating 5.10 runtime file. Please advice. I was able to correctly download and use the HMI on a similar machine. I dont know what am I missing on this one. Thanks Pratik Jain
-
I am trying to get the communication going between EZ3 EZAutomation Panel HMI and Omron NJ501-1300 PLC. I am currently using Modbus TCP/IP as a protocol. Has anybody figured out a way to do that? Or is there a better way to do this communication between HMI and PLC ? Right now I am using MTCP_Client_Connect function block to connect with HMI but it dont seem to be working. The IP address is correct along with Port no. I am still fuzzy about the Station address of NJ and the function code of the NJ for Modbus purposes. If anybody could help me out I would really appreciate it.
-
i try to use M8029 to be able run pulse in sequence, i mean i can't use regular PLSY or DPLSY, it doesn't work. So i add M8029 to help clear it and make the plc able to make pulse again. But the problem, when the sequence is finish and i need to start again, plc doesn't give pulse again because the memory that set it on is already reset by M8029. how to set it on again or reset the M8029? By the way, i'm using FX3U-48MT. Thanks,I would really appreciate your help.
-
Dear mrplc and plc experts, I would like to ask for any solution or insight regarding to mitsubishi cpu problem with code: SP.UNIT LAY.MZZ which I could not find any footage/information related to this error Your helps are really appreciated.
-
I want to do a calculation in the FX3u-48MT ESS and combine it with the input from HMI GOT1020. By the time i put input in the HMI with real number, and i calculate that with some equation just like in the manual as seen in the picture. I was confused when the result in the DINT is too many and in the pulse, it got minus, when it should be plus. Is there any way to fix this ? and how to round up the result correctly ? I really appreciate your help. Thanks in advance.
-
I'm trying to overlay a text figure on top of a bit lamp. You'd think it'd be easy... but no matter what layer I set the lamp to, or how many times I click "Move to back of layer" from "Stacking order" in the right-click menu, the text figure stays behind the lamp. The only reason I'm using a text figure vs. just using the text function of the lamp is because I want the text to be vertical - a feature that you do not have with the text function of a lamp. Any ideas on how to fix this? Any help is greatly appreciated!
-
Hello good morning, I would like to comment on a case, I have a MR JE A 20 driver, it is connected to a plc and it moves a clamp. The fact is that I have variations of distance until it reaches stops and skips the inverter by overload. Well my question is the following, I want to use the mr configurator, I downloaded it, but it gives me a drawback when I connect it I figure as the driver, but in the program it only appears offline, I can not revert, it will be because the Plc Thank you very much for your reply
-
Hello everyone, I have difficulty to setting up the GSM configuration or the serial RTU configuration so that I allow you with another RTU. I use Schneider CPU Modicon M340 in conjunction with RTU communication NOR0200H and a Modem Schneider SR02 MOD02. This is the first time I'm working on this kind of project, want to help me, I'm stuck and I need a solution, thank you for your time. -
Good day Please assist me - pertaining to the QSeries GXWorks2 Programming - and in particular the utilization of the macrocode functionality. The information required includes; [1] Purpose of macrocode (incl advantages) [2] its utilization's effects on the PLC programming memory (it appears that it consumes more programming memory. [3] any reference documentation that could be used - containing specifically information regarding this feature (note most manuals doesn't discuss this)
-
Hi, I'm trying to convert a binary string format to integer using Q03UDE CPU. String data : '1001' Expected Result : 9 Kindly help.
-
Hi guys. I have 1 cj2m cpu33 reciving 3bits of info from 3 other plcs (all similar type cj2m cpu 34-33) The problem is that 2 bits are ariving the third one is not. See the pictures i uploaded: I do not know these instructions, in the other cases it was working. However i noticed that the output plc had a different adress with D950. I changed the adress to D804 as you can see on the pictures but still not reciving the data. I guess i will have to configure somwhere else also. All i found (https://www.myomron.com/index.php?action=kb&article=1416) on internet that i have to open this datalink tool from the integrator. When i actually do that of course i just get an error: FATAL Error. Cannot read the file. How can i make this work? Is the other way to constantly send this one bit with ethernet? Any sollutions, advices are welcome!
-
Hello: Has any body encountered Profinet IO cyclic communication establishment problems between the latest S7-1500 PLC with firmware 2.0 or later and non-Siemens Profinet devices which had previously passed conformance testing campaigns? Thanks for your comments.
-
Allen Bradley 5069 Compatlogix communication issue with Red Lion HMI
addie1309 posted a topic in Allen Bradley / Rockwell Automation
Has anybody tried communicating Allen Bradley 5069 Compact logix PLC with Red Lion HMI ? I am unable to communicate them in spite of adding AB tags via L5K file which gives me no error. I am able to see all the tags in Crimsion 3.0 software in development mode. However, PLC & HMI are not communicating with each other. I am able to ping to both, using the same program in PLC of which I generated L5K file. I think it may have something to do with the driver as 5069 is a new line of PLC Rockwell come out with only in 2016. -
Socket communication with Micro820
Anthony Blanchette-Potvin posted a topic in Allen Bradley / Rockwell Automation
Hi everyone ! I have a little project wich involves communication between two Micro820 controllers via TCP/IP. To do that, I started to work with TCP/IP socket. Within CCW (Connected Components Workbench), I tried to create a new socket instance using the instruction SOCKET_CREATE and set the socket address to 127.0.0.1:21. Basically, my computer through the FTP port. The problem was that it couldn't create a new socket instance (error variable is set to TRUE and status is set to 4, wich I don't know the meaning) because I didn't have a server-side application that listens to TCP/IP socket requests. That said, I found an open source application called SocketTest that listens for TCP/IP socket requests on a specified IP address and port. So, I started a listener on the following address : 127.0.0.1:21, but the error variable is still set to TRUE and status is still set to 4. So, my questions are : Is my IP address OK ? Is my port number OK ? What means the status code 4 ? Is SocketTest doing what I think it does ? Do I need to do something else before using the SOCKET_CREATE instruction ? Thank you in advance for your help ! -
hello everyone, I'm trying to connect PC with Micro830 with RS232 cable for transfer serial data. However, the PLC can not receive the character from PC. I used ARD function block to read the characters from PC. there is no error and the output of ARD function block is 0 when I debug ladder programme. the serial communication state LED illuminated once I send a character from PC to PLC. the channel of input is 2 which is the embedded serial port. I use an adapter from USB to RS232. Email: jeremietang531@gmail.com
-
Anyone know if MXSheet will talk to the R series CPUs?
-
Has anyone used EtherNet/IP to CC-Link Local & Intelligent Station Gateway of prosoft? is there a timeout issue even with a small network of 2 Q CPU and 1 controllogix connected via etherned? I need to read and write data to and from 2 Q CPU and Clx so I am considering this as an option. editted: not lag but more of timeout issue if there is simultaneous read write from both melsec and clx with 3 DINT words.
-
Hi Has anyone got any real life experience with the new Mitsubishi iQ-R series? I have been assigned a major capital project to replace our old ageing DCS system. Our current PLC backbone is about 40x Q2ASHCPU, 10x Q06UDEHCPU and about 2xA2SCPU all linked up via Melsecnet/10 network with communication links into the DCS system via Modbus RTU utilising the QJ71MB91 modbus card. Due to the nature of my companies process and the limitations on plant downtime it is estimated this project could take up to 5 years to complete, with this in mind I am wanting to install a system that will not be obsolete (or unsupported) in a few years, hence, I am very interested in the new iQ-R series with it being Mitsubishi's latest and greatest. However, recent communications with my local Mitsi rep is not filling me with confidence that the iQ-R series is not as well supported/developed as the Q series. A major requirement during the development stages of this project is the new ability of the new processors to be able to talk to the old DCS up until a point where the DCS nodes will be completed removed and replaced with a modern SCADA package. Hence, the requirement of a Modbus Slave card for the iQ-R (i.e. a QJ71MB91 equivalent) which I am told is in development, but has no fixed timescales. Previous experience with Mitsubishi developments of cards is normally years not months. Any information anyone can provide on their experience of the iQ-R series would be greatly appreciated and if anyone knows if a Modbus Slave card is in development that would be useful. I realise i could utilise the Q series extension rack with a iQ-R processor but this is not the route i want to go down. Thanks for any help and apologises for the war and peace. Cheers Matt
-
FX5u to FX5u Ethernet inter-connection (For data transition). (PLC to PLC communication)
RV3.0 posted a topic in Mitsubishi
Good day I require some assistance with the configuration setup (GX Works 3) for FX5u PLC inter-communication (PLC to PLC), over Ethernet (using the built-in Ethernet port). The purpose of the inter-connection is data exchange. (Values stored within the PLC storage registers such as words and bits). Does anyone perhaps support files on this such as a procedure or example? Thanks -
In general, this control PLC program is written in GX Works. I did a simple visualization on TIA Portal v14 (WinCC RT Advanced) and I would like to now test it on Mitsubishi FX3U driver with ENET Module. I do not have much experience in this kind of thing, I'm still learning. I know that someone previously made a visualization in LabView and downloaded the tags from the PLC using NI OPC Server. Someone also did visualization in iFix and also downloaded tags through server opc. I do not know just how or what program to download tags in PLC so that I can no longer use it in visualization in TIA Portal. Unfortunately I still have a connection problem. The driver is connected to the router. From the connection options with RT Advanced I chose in the connections tab Mitsubishi and entered the appropriate IP. Still nothing. I do not know if the lack of a connection can be related to a virtual machine (VM Vare Workstation 12) on which I have TIA Portal installed. The driver pings but can not connect. I also tried using KEPServer EX to connect and unfortunately also failed. (I have information about the can not connect). Anyone know what program I should use? or had contact with such a problem? I attach a photo of communication from my station to more visualize the problem. Thanks
-
I have fxg3 and fx3s Mitsubishi PLC and gx developer software ver.7 ,my question what is the suitable software and cable to connected with pc
.jpg.ab4bdacbd75415ee4a44ee0400895a6a.thumb.jpg.83cdde1f1a77c9aa8bca447d6c02783b.jpg)
