Search the Community

Showing results for tags 'micrologix 1000'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 87 results

  1. CVS file log not generated.

    Hi guys, Yesterday I posted a question about how to create a trigger for a log. Now I have the next problem. I created my log, loaded the Logging firmware on the GOT but the CVS file is not generated. Can someone tell me what i'm doing wrong? I am attaching all the settings and the PLC part of the program. I want the values of ZR1200 ZR1204 and ZR1205 every time they change. They are recipe values. I tried also putting a button to create the log file on the HMI. Did not work.  
  2. Hello all, I am still fairly new to this forum and PLC's in general. I am trying to connect a EA9 touch panel via Ethernet to an Allen Bradley Micro Logix 1400 PLC. I am using Ethernet over serial because I need the serial connection to program while using the touch panel. I have given the Panel the IP Address 192.168.1.20 with a subnet mask 255.255.255.0 and I have given the PLC the IP address 192.168.1.10 with a subnet mask 255.255.255.0. The panel is not communicating with the PLC and I have very little knowledge on the subject, anyone's help would be greatly appreciated. The picture on the top is from the PLC and the picture on the bottom is from the C-More program for the panel.
  3. We have a sterilizer w/ Allen Bradley controls which we bought at auction.  It has a panelview plus 1000.  It came with a CD containing .mer and .apa files.  I was able to load the .mer file via the configuration screen by using the external CF card.  When I run the application, their is a login button in the bottom right which when pushed brings up a user/password screen.  We do not know the user/password for this.  Is it possible to find the password by somehow reviewing the files.  We do not have any software, and do not want to make any changes to the program (rather than changing the password).  I've attached the files in case anyone can help. Also, was i correct to load the .mer file??  or should I be using the .apa?  I followed these instructions here. http://www.judiwa.com/2010/10/05/how-to-copy-panelview-plus-application-with-compact-flash-card/ Thanks for your time PA1525_PVP1000.mer PA1525_PVP1000.apa
  4. I have been searching on how to import logic 500 tags to connected component workbench for panel view 800 project and striking out is there a way to do it? Project is to replace optimate  OM440  HMI connected to MicroLogix 1500 with a panel view 2711R-T7T. Replacing the controler is out of the question at this point. Tom
  5. Hello every people, I am working in to project with one PV Plus 1000 (2711P-B10C4A1 with Logic Module 2711P-RP1A), one KF2 and PLC 5/15, I have finish logic of PV 1000 and PLC 5, but the communication not good , this is the configuration made:       NODOS PLC 5/15 have address nodo 11 KF2 have address nodo 60 PV Plus 1000 have address nodo 0 PINOUT CABLE  DB9 (PLC) -- DB15 (KF2) 1--5--7  --->   8--6--7 DB9 (PV 1000) -- DB25  (KF2) 2--5--3   -----------------> 2--7--3 I wait for your help   Thank you         
  6. Hello, I am currently installing a PLC control panel and due to space constraints, we will need to install the Panelview 600 HMI separate from the Micrologix. We purchased a 50ft Allen Bradley communication cable, but 50ft will not be long enough. We have about 70 to 75ft of conduit between the panel and the HMI. I would like to know what options we have for this connection. I read that for serial connection, we shouldn't go past 50ft. I understand the Micrologix 1100 has an ethernet connection and the Panelview does as well, but I'm not sure what changes would be needed in order to communicate through the ethernet port, instead of the RS-232 port. Any suggestions will be greatly appreciated.   Thanks, JCG
  7. Version 1.0.0

    807 downloads

    This target setting files are used with codesys software for programming mitsubishi nexgeine PLC series,   
  8. Have a red lion HMI G306A connected to a micrologix 1500 plc. Communication working. I want to be able to change screen through plc as well as have plc be able to read what acreen is active. Had an old panel view hooked up and can use an integer to do this one for active screen and one for screen change called for from plc. Thanks for the help on this.
  9. I'm having problems with some explicit messages between the 1100 and the power flex 525, the message that send the commands to the 525 has the error code e6 and according to what I read the error describes Target node cannot respond because requested function is not available. Thank you for your help.Vinicius Galvão
  10. Hello all I want to know if is possible implement the standard IEC 61499, for distributed control, in a PLC Micrologix 1500, this standard proposes use function blocks, but this blocks are different to the blocks proposes for the IEC 61499
  11. I'm designing a PLC system in which a Micrologix 1400 talks Modbus TCP/IP with three Modbus TCP-capable SCR controllers. I've never done Ethernet/Modbus TCP communication using the 1400, so I'm asking the following questions: 1. Can I connect the 1400 PLC and the three devices to an Ethernet switch and configure Modbus TCP communication from the devices to the PLC (data collection only) ? The switch will also be connected to the customer's DCS, receiving the data from the PLC and the three devices. 2. Can I connect the Ethernet port on the1400 PLC to the Ethernet switch directly, or do I need some kind of Ethernet interface, like the 1761-NET-ENI ? 3. The system also includes an HMI, connected to the 1400 PLC by RS-232 communication. Any issues with communicating with the HMI and doing Modbus at the same time? Your help in this matter would be highly appreciated. Thanks. Ron
  12. Hi everyone, I have a Micrologix 1400 that went out over the weekend.  First thing that happened was a contact went out on it forcing us to move the wire and change the program to a different location, but then the next day it provided full voltage to a solenoid even when it was supposed to cut out via timer.  We switched the processor out, but now I want to find out why it went bad, and if there is something I can do to make the next one last longer.  I don't have techconnect through AB (That I know of), so how and where do I send my processor out to get a post-mortem analysis on it?
  13. As I am a noob this is probably a noob question. I have a machine with a micro 1400 and if the machine has a fault or jams it lights it's "machine fault" lamp. The fault can be triggered by one of 8 prox switches not getting made within a certain time span. There is nothing to indicate which one. I'd like to program the lamp to, rather than stay on steady, have a blink pattern to indicate which prox caused the fault condition. 3 blinks and a pause, then repeat for PROX 3 for example. I have searched for this with no joy. Thanks - Jon
  14. I have this panel view 1000 plus with accounts enabled but customer forgot the app password. I have both the executable and source file. Can I retrieve the password from any of both files? Can accessing configuration mode help disabling security to enter new passwords? Having the files, what is the best way of retake control over this application?    I am not experienced on AB equipment, but have general experience on automation. I have access to Factory Talk View.
  15. Hello,  I am getting this fault when I am trying to load one of my program and set to run mode.  I have the same plc and I have not had this problem again. 1761-L16BWA Any suggestions ? I think this plc is older than the other I have. 
  16. I have a micrologix 1200 series module which goes on fault mode after providing it in run mode and it shows an error of 81h whenever i clear the fault nd go to run mode i get faulted again. Please help guys  
  17. I am working on a project with Micrologix 1400 and PanelView C600 I am not able to communicate over Ethernet with any device and my computer. I was not able to load the HMI screens so I don't know if they are communicating between themselves. The RSLinx does not see any device connected via Ethernet. I am using EtherNet/IP driver for this, not sure if that is right. I have tried connecting directly to each device from PC over ethernet and also connecting to them through switch. I can however ping each device and the packets are coming back. The IP assignments are as follows: 192.168.0.1 Router 192.168.0.2 PLC 192.168.0.3 HMI 192.168.0.25 PC Would anyone have any suggestions what I need to try to get this resolved? I was able to communicate with the MicroLogix via serial port but was not able to communicate with the PanelView through serial port at all. I have tried using the USB-2711-NC13 cable for the PanelView connection. Thank you.
  18. I want use the panel view 800 with micrologix 1100 but  i can't add the controller in connected component workbench. Exist another program to program the panel view???
  19. Excel Add-in for Allen-Bradley Data Logging

    Version 3.11.2.0

    518 downloads

    ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2021 (version 16) spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for Allen-Bradley ControlLogix, CompactLogix, MicroLogix, Micro800, PLC5, and SLC500 communications. No OPC, DDE, external drivers, or programming required.  
  20. View File Excel Add-in for Allen-Bradley Data Logging ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2016 spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for Allen-Bradley ControlLogix, CompactLogix, MicroLogix, Micro800, PLC5, and SLC500 communications. No OPC, DDE, external drivers, or programming required.   Submitter Automated Solutions Submitted 03/01/16 Category Demo Software
  21. I'm using AuthSmtp as my mail provider and I need to be able to specify the port number. I can't find a place in the rslogix 500 channel setup to put the port id. Currently I'm giving just giving it the host name 'authsmtp.com. I did try the ip address with the port number xxx.xxx.xxx.xxx:xxxx but that didn't work either. Any thoughts are appreciated.
  22. Hi All Was wondering if anyone could help i've setup an OPC Server ok and can read all the tags from my PLC. Now i need to write to some of the tags so the warehouse can input production requirements. Has anyone done this or any idea on how to do this. Any help would be great. Cheers Chris
  23. I've been programming PLC's for about 2 months but working with other types of control systems for a few years. I'm currently building a program to control a water storage tank for the farm that will interface with advanced HMI. my issue right now is with my fault light stack and fault logic. im trying to use a NOT instruction so that the green light is always on unless the Red light comes on... so i thought i'd use NOT so that if N7:30 is not true or 1 then the green light is on but if it is true then its off or 0 ...but i keep ending up with -1 or -2 in the interger file. also, my OR logic of the yellow light that should trigger if any of my 4 tank level switches fault only works on one of the rungs... if either of the N22 or 23 come true then N7:31 comes true but it doesnt seem to work the same way on the rung for N7:20 or N7:21 to trigger N7:31... if either of them come true N7:31 doesnt come true. im submitting my logic for your review... thanks so much in advance. WaterSystem.RSS
  24. Hello A-B Guru's, I have a small station with a Micrologix 1000 controller in it. Keep getting a "Major Halt Error S:1/13, Invalid STI interrupt set point. Refer to S:30." It is a very simple program, not using the STI instruction. Have a filter on the processor power. Nothing crazy going on, on the station, no big coils, etc. What can I do to prevent this fault from occurring? Can I add a line of code to always unlatch S:30? What should I do? Please help.
  25. Micrologix 1500 PLC tripping /stopping periodically with red led indication . It is showing error 679H It is also showing error on Analog Output Card which is at slot 6 . After clearing error it starts and stops again after some time . Requested to suggest me any solutions for eliminating the problem