Search the Community

Showing results for tags 'micro 1000'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 49 results

  1. Password!!

    HELP! Does anyone know how to change this setting from password numbers to letters and numbers?  Much appreciated Matt R  
  2. OS SECURITY ISSUE

    HELP! I have been tasked with setting the security levels on this GOT 1000 HMI on GT Designer 3, i have come into a problem and this error message keeps appearing: "Delete OS from GOT since authentication does not work if OS for Operator Authentication is installed". I have recently with success set the password levels on a new HMI GOT 2000 and was able to create a log in and log out switch within the program so i understand the procedure.  Please see the picture below and i will appreciate any information.     Matt R 
  3. which programming cable use for Mitsubishi Nexgenie 1000 Series (NG16DN)  PLC ? PLC has 9 Pin D Male Connection.
  4. Hey everyone, I'm new to programming PLCs and I've run into a problem. I have a Micrologix 1400 Series B PLC, and for the past month, I've been using a free trial of RSLogix 500 Starter. But now, the trial ran out, and so I bought a license for "RSLogix Micro Starter". The problem is that when I downloaded my updated file to the PLC for the first time with micro starter, the PLC's outputs don't work anymore. I checked the PLC screen and the inputs from the HMI screen are getting recognized, but the inputs from the physical sensors are not. Also, none of the outputs are being activated on the PLC at all, which I can tell by looking at the I/O status on the PLC screen itself. I then uploaded a new test program, where you press a button and a light turns on, but that doesn't work either. I haven't changed any of the physical wiring, only thing I've changed is that I'm using RSLogix Micro Starter as opposed to RSLogix 500 Starter. I spoke to a Rockwell technician about this and he said that there shouldn't be any problem, as I haven't done anything wrong. So I now ask everyone on this forum if they could help me out a bit.
  5. mitsubishi nexgenie plc target settings View File This target setting files are used with codesys software for programming mitsubishi nexgeine PLC series,    Submitter lionheart86 Submitted 01/18/17 Category Demo Software
  6. Hi all,I'm completely new to ASCII and trying to figure out where I'm going wrong here.Application: I need to send 2d barcode data to a KGK Jet model CCS3000L Inkjet printer. Only protocol possibility is ASCII. PLC I have is a Micro850, and the only port option for ASCII is the serial port. I modified one end of a 2707-NC11 cable to connect PLC TxD to printer RxD, PLC RxD to Printer TxD, and PLC SG to Printer SG. I jumpered CTS and RTS at the printer connector, and the 2707 cable I'm using doesn't have wires on the Micro850 CTS or RTS pins.Printer company verified that I can just jumper RTS and CTS on their side and not connect their DTR and DSR pins (since I'm not using hardware handshaking). I don't really need any flow control for the application ( I don't think...again, ASCII noob here).Do the CTS and RTS on the PLC side need to be jumpered? Does the DCD pin need to be jumpered or connected to something if I'm not using handshaking?I downloaded the Micro800 ASCII read and write functions and function blocks from Rockwell library, and they seem to be working, except that I keep getting ABL error id "7". This error states, "Cannot complete ASCII send or receive because channel configuration has been shut down using the channel configuration dialog box." I have the serial port enabled and configured to ASCII, no handshaking, baud 9600 same as printer, no parity check, 1 stop bit, character length of 8.Any help in pointing out what I'm doing wrong or things to try would be greatly appreciated!   ASCII_TEST.ccwsln
  7. Motion Control

    Hi Everyone.   I have been tasked with changing out an older Flex Drive servo drive to a more modern Micro Flex drive in a machine that has an Omron CQM1H-CPU51 PLC.  I'm having a few issues but hope that i can gain some clarity around at least one of the hurdles Im facing from here. Biggest issue for me at this moment is My work hasn't yet purchased a programming lead for this PLC (or even the bits required to make one myself) but i have a feeling the control for the Servo is done via motion control in the PLC.  Question here is, if changing from one servo drive to another type, will the motion control code need to be updated to work with the new servo drive?  I have very limited experience with motion control itself at this stage so I'm a bit lost when it comes to these sort of details. Regards Kiwi_man82
  8. PLC is old one, but I need to add one feature, Signal can be very short and when I get it I want to stop auto mode. I am afraid that signal can be so short and skipped by normal input. How I can set input as an interrupt input. I read that PLC has events processing and it can be triggered by " inputs 0 - 3 of position 1 module, on rising or falling edge"  - in first slot I have card TSX DMZ 64DTK. ( 32 inputs and 32 outputs) is it true ? -  and how I associate it. Maybe I create new Events and as an input I use f.e %I1.0  or I configure it somewhere?   thanks for help     
  9. Hello everyone, I am a newbie with PLC. I have a Micrologix 1000. The last time I connected with RSLinx easy, however, I change it to DH485 (I do not remember exactly). And now I can not connect it to RSLinx, I tried many times for all types of drivers. Please help me. Thank you very much.
  10. Hi! I'm using RSLinx Classic, RSLogix Micro English and RSLogix Emulate 500 to emulate a Micrologix 1100 Series B. I'm able to run, program and simulate different input and output with the emulated PLC. Everything works fine. My problem is that I'm writing a program using the nodePCCC library (https://github.com/plcpeople/nodepccc) and I'm not able to connect to the emulated PLC using the address 127.0.0.1 and the port 44818. I tried  running 'netstat -a' on Power Shell and I found out that the port 44818 is not being used.  Could someone help me identify what I'm doing wrong?
  11. Would someone be so kind as to document a method to clear a fault on a Micrologix 1000. Does one need programming cable and software or is there another method to clear a fault to see if it returns? regards.  
  12. Hello all, I am working on a project where I am communicating with a Mensor CPT6100 pressure transducer using a Micro-850 PLC. For this, I have used an AWA instruction to write some ASCII characters to the sensor. The sensor then responds to the write instruction by sending ASCII characters to the RX buffer and I used ACB and ARD instructions to read the ASCII characters. Now, I have set the ACB trigger type to 0 (msg triggered only once) and it successfully reads from the sensor. However, when I set the ACB trigger type to 1 (msg triggered multiple times), I do not get any reading in the ARD block. As a matter of fact, the ACB Q bit switches off every time the program is executed when the trigger type is set to 1. I am trying to get continuous readings from the sensor, but when the trigger type is set to 0, the program latches on to the first and only reading and it won't change. My question is, how can I change my program so that it can continuously and autonomously read from the sensor without me having to manually trigger the AWA and ACB instructions every time. I am attaching the program to this thread for your reference.  ASCII_Test_Copy.ccwarc
  13. I want to offer my industrial surpluses for your projects! All details are verifiable. Excess surpluses often occur. Sending to any country in the world. The price is low. I can pick something up for you personally. Sending can be made, both expedited, and economy air delivery. Ukrposhta or EMS Ukraine. Siemens Simatic, Wieland,  Wago 750, BECKHOFF, Schneider electric, Schneider Automation, Yaskawa Omron, KEYENCE, Pepperl+Fuchs, Telemecanique, ABB, FESTO,  DUNKERMOTOREN, Eaton, Micro Innovation, Jumo, Phoenix contact, Bruel & Kjaer, Unitronics, Samson, Danfoss, OMRON, Rexroth Indramat, Fanuc.  https://www.ebay.com/usr/vitalij6131   All parcels are sent by Airmail, are processed with disinfectants and sent with a large number of bubbles before being sent. For safe delivery of the parcel to you! I am worried about your safety, in this difficult time for you!
  14. Hello - we run a car wash that is controlled by a Modicon TSX Micro 3721001. It is indicating a CPU fault. I've attached a picture of the unit in place, with the LEDs lit. I have ordered a new base unit (2nd picture). I haven't tried it out yet, but it is tested working. I am hoping a base unit replacement will solve the problem, but wondering if it it possible the problem could be in the modules? I did not order those but now wondering if I should have... If the issue could be with the modules, is there a way to test which one it would be so I won't need to order all 4? If it coult be a module, I might order that now as I am in a rush to get back in service. Thanks for any guidance! Andy
  15. We have a carwash automatic controller board with an Eagle Signal Micro 190 PLC.  The program has been reloaded after power outages from a MX207l1 EEPROM Memory Transport Module for over 20 years.  Suddenly the reload isn't working -- either the MTM lost it's program or the socket has worn out over the years.  Anyway, the program can also be loaded via a 9-pin serial cable from a PC.  In trying that, we've found that the program the vendor gave us on the PC doesn't match that on the MTM.  Testing shows that only one output is incorrect.  We simply need to change output on O22 (broken trace on the board 20 years ago) to O20 (which would then match the MTM code).  I am a software engineer, but have never used ladder logic in a PLC.  I *think* I have changed the output, but maybe I just changed a comment.  [Testing requires powering off the carwash, with loss of $$ if we can't get it back up, and $80K expense for total failure, so trial-n-error isn't feasible.]  (1) Can anyone discuss what I did with me so I have a better idea if it will work or not?  (2) Is there anyone in the Atlanta area willing to look at this?  Thanks for reading!
  16. Hello good day ! I have a problem with a Panel View 1000 plus, I accidentally connected this device to 240V and the rv2 of the circuitry has burned. I am not sure what reference this device is but I need to change it as soon as possible, I would appreciate it if you could help me! Thank you
  17. Does anyone have the User Manual for the Modicon Plus 1000? Trying to program a "ReadOut" template to show the value of a PLC-5 Integer file. Keeps saying that the "N" is not a valid file type. I've done this on the Cutler-Hammer PM1000. The Modicon will not allow the C-H program to download, says it's not a C-H product. Thankx in advance for any help
  18. Hello I would like to first let everyone know I am new to the world of troubleshooting or programming plc's . What we have is a SLC500 system that is connected to a Panelview 1000 HMI via the DH+ network. The issue we have is the panelview displays a gate that is suppose to be closed at as gate fault. When i connect to the plc the ladder rung shows that the gate is closed. To show various positions of the gate the programmer used N13:70 as gate opened and N13:71 as gate faulted and N13:72 as gate closed. When i checked the logic it showed the bit N13:72 as engaged or true if you will. This logic is in the ladder rung that is labeled PV Status which i take is the status the HMI reads so my question is why does it show GF when it should be reading GC. Ive searched all through the logic and it doesnt appear to be wrong here is the logic the best I can simulate it  ladder 6 rung  53  instruction is  XIC O:13.0/11 and OTE N13:76/0 (Gate Open ) and the branch is XIC I:5.0/11and OTE N13:76/1 (Gate Fault) next branch is XIC N13:3/11 and OTE N13:76/2 (Gate Closed which this section is green or highlighted or true which ever you like) when i looked at the input XIC N13:3/11 this is what I found is that this XIC is on ladder four rung10 and has the following XIC T4:154/DN and branchoff that is XIC I:5.0/11(gate opened)XIC I:6.0/11(gate closed) which these two inputs are false or not lighted the output is OTL N13:3/11 and it is true which makes the previous rung true showing the gate closed. So why is the panelview showing the wrong position. I even went as far as resetting the HMI and the PLC so if anyone has a helpful hint I would greatly appreciate it.
  19. Does anyone know a way to convert GOT 2000 screens to a GOT 1000? 
  20. Cable pin configuration required.

    Required cable PIN configuration for Nexgen 1000 series PLC, MS-40M-E, NT11-SF121B-EV1 , GT1020-LBD.  
  21. I am trying to read data from a Micro 850 into my L18 (V 30.11). I have never set up an ethernet bridge between these 2 components and i have been up against a wall since starting. I have the MSG blocks in my routine but i am obviously configuring either the bridge, MSG instruction or something wrong. Any help will be GREATLY appreciated!!!
  22. Dear all, i have using nexgenie 1000 cpu for my new project. but i am not able to connect with codesys v2.3 . I have installed target file T1.4 and T2.4. trie with both. Now i have doubt with communication cable. I have used standard RS232 Cable with 5and 8 Pin short. Kindly suggest the correct one. Thanks in advance
  23. How to connect Micrologix 1000 With Weintek MT6070ip HMI? i Can't connect my Allen Bradley Micrologix 1000 With Weintek HMI...
  24. Is it possible to communicate from a PC program to PLC program for reading inputs and setting outputs? How can it be made ? is it possible to do from TER connector or AUX connector , without special comm module?
  25. Hello I downloaded a .mer file on the Panel view 1000 but it shows errors on the display graphics. i have configured the Rslinx communication several times by selecting the rigt PLC in Design and Runtime mode. I am using Facotry Talk view 8.20 and creating 5.10 runtime file. Please advice. I was able to correctly download and use the HMI on a similar machine. I dont know what am I missing on this one.    Thanks Pratik Jain