Search the Community
Showing results for tags 'memory problem'.
Found 86 results
-
I would like to compare the content of 2 registers of D memory on my CJ1M PLC. I'm trying instruction = (equal) and D30 and D50 memory registers to compare data and activate an output, but I don't understand why it shows the same direction (&98 on the image).
-
Hi dears, How can i see the cpu used memory in cx-programmar and actual cpu( for example 20%, 30% or etc) Best regards
-
Data entered into the PLC D memory table does not end up in the instructions and I'm not sure what I'm doing wrong. For instance I want to use the CP1W-DAM01 to change a duration value. I have a symbol setup using the corresponding address setup so that it ties in with my timer but the data does not transfer even thought the value shows up in the table. I'm also using it for parameters on a scale instruction, same issue. Any ideas.
-
I was wondering if anybody out there has ever made a generic popup to deal with multiple devices, similar to what you can do with factory talk and wonderware. I want to be able to index addresses from the PLC to the PT memory but it doesn't look like you are able to do this. Is there anybody out there that has come across this same problem?
-
Hi Dears, I have one heavy ethernet network I have 21 station PLC (S7 300) that each station have one server & I have one server that connected to all of this PLC in center. all servers are in one ethernet network I want to know that this configuration is ok? ethernet network can support these number of servers? or may be network fail?
-
Good day. I'm using 1756 L71S GuardLogix Integrated Safety Controller with Studio 5000 v28. My controller is connected to a third party software through ethernet connection, it simulates my project hardware and provides all the signals to my PLC. To know all the hardware signallocation at PLC memory, it uses a Tag export file provided by Studio 5000. In other PLCs, when you declare a variable as hardware input, you have to select in which address from the memory you want this input to be read, something like "Bit Input 0.0". But in AB this step is skipped, that is all addresses are managed by Studio5000 and hidden from the user. Is there any configuration at Studio 5000 that let me assign or at least see this addresses? Normally I would prefer my tags addresses to be hidden, but in this specific case it is more useful to know memory addresses.
-
Hallo. Can someone shed some light on how much memory st takes ? does it use more that traditional ladder? i find that a routine with a couple of thousands of lines uses over 500kB is there any tricks to lower the usage? Or is it just what it is, and buy bigger cpu’s
-
Send data memory from PLC to other PLC with CX Programmer
Amsterdamstyle posted a topic in CX-Programmer
Hello people, I hope someone can help me with this. The system is connected with 8 PLC's. I want to transfer the data memory of a PLC to another like this: D850 from PLC2 to D900 PLC1 D850 from PLC3 to D901 PLC1 D850 from PLC4 to D902 PLC1 D850 from PLC5 to D903 PLC1 D850 from PLC6 to D904 PLC1 D850 from PLC7 to D905 PLC1 D850 from PLC8 to D906 PLC1 The data memory is an integer. -
Hello! I am using S7-1200 PLC 1212C AC/DC with configured Modbus TCP Server. I can already read/write Inputs/Outputs (Coils) and Memory Words. However I'd like to read/write Memory BITS. Is it possible? If so, how? What addresses should I use in TIA portal? And which function codes on client side? Thanks in advance!
-
Panelview 1000 does not display correct input
Fourdigger posted a topic in Allen Bradley / Rockwell Automation
Hello I would like to first let everyone know I am new to the world of troubleshooting or programming plc's . What we have is a SLC500 system that is connected to a Panelview 1000 HMI via the DH+ network. The issue we have is the panelview displays a gate that is suppose to be closed at as gate fault. When i connect to the plc the ladder rung shows that the gate is closed. To show various positions of the gate the programmer used N13:70 as gate opened and N13:71 as gate faulted and N13:72 as gate closed. When i checked the logic it showed the bit N13:72 as engaged or true if you will. This logic is in the ladder rung that is labeled PV Status which i take is the status the HMI reads so my question is why does it show GF when it should be reading GC. Ive searched all through the logic and it doesnt appear to be wrong here is the logic the best I can simulate it ladder 6 rung 53 instruction is XIC O:13.0/11 and OTE N13:76/0 (Gate Open ) and the branch is XIC I:5.0/11and OTE N13:76/1 (Gate Fault) next branch is XIC N13:3/11 and OTE N13:76/2 (Gate Closed which this section is green or highlighted or true which ever you like) when i looked at the input XIC N13:3/11 this is what I found is that this XIC is on ladder four rung10 and has the following XIC T4:154/DN and branchoff that is XIC I:5.0/11(gate opened)XIC I:6.0/11(gate closed) which these two inputs are false or not lighted the output is OTL N13:3/11 and it is true which makes the previous rung true showing the gate closed. So why is the panelview showing the wrong position. I even went as far as resetting the HMI and the PLC so if anyone has a helpful hint I would greatly appreciate it. -
GT2310 <--> F800 communication error, communication is established
MarkusR posted a topic in Mitsubishi
Hi everybody, I have a GT2310 communicating with the Mitsubishi F800 VFD. I am using the Freqrol 800 communication driver, connected to the RS-485 terminals of the GOT and on the F800. The comm settings are the same on both devices. I also tried to use the “auto negotiation” setup. I have communication between the two devices. I can read and write to F800 registers. Anyways, The GT designer diagnostics is complaining about a communication error in the system alarms. The error can be reset but it will appear again. This also happened when I created a new, empty project where just the communication was setup as described above. Did anyone experienced the problem and how to troubleshoot / solve this? Best regards -
Greeatings . I have modicon TSX premium plc (TSX P57103) I have problem i cant connect to my plc. I have tsx pcx 1031 cable and have com port on one PC and on the second i have connector to this cable with usb. when i try xway test i have problem , the request is always 0 . Can someone help me ???
-
Halo, my name is Riandanu, I connect PLC Omron CP1E to weighing scale, and its done. i think i dont have problem between PLC and weighing scale. And i want to ask about, how to compare value from weighing scale ? example : from the picture you can see value of weighing scale is " ST,+00160.66 g", and i want to compare it with 180 or 150 to give output on to lamp. Thankyou Riandanu PLC to ek-i.cxp
-
Hi, I have .fbk backup file of iFix aplication (i mean).. When I try to restore it by "Backup&Restore Wizard" in part where I "Browse" the way to Backup file and click on "Next" is problem. Pop-up window show -> "Bad file format. The archive file may be an old version or a wrong version in header signature or is not a Proficy iFIX full backup file (.fbk)" .... My question is = Is possible to find what of version is my backup file ??? when i suppose this error mean i have installed wrong version of iFIX sofware (my version is iFIX 5.5).. Or is no problem of my iFIX version ? Thanks
-
Hi All, Just to verify if the "memory card" , in attached document Page 4 highlighted area , provides Omron CJ2M CPU21 to retain memory when powered off? If yes, for how long can the memory lasts without being charged? Isit capacitor or battery? Thanks in advance. Regards, Summer cj2m-cpu31.pdf
-
We have Q06UDEHCPU PLC. We require to attain 1k of file registers in standard Ram. Please find our settings attached - PLC Parameter.png; When we try to down the register file – we attain the following error; “Failed to access standard Ram” error message (attached - Downloading Error.png); The program is very small – and thus we have plenty of space as well.
-
Hello I have been using GX Works 3 for a while now and I have discovered a couple of things, maybe bugs. I have not had any training for the software or hardware so maybe I did something wrong. 1 Labels. If you sort a global label table into any order other than the unsorted order that appears by default you are unable to create, delete or edit any labels. Our Mitsubishi representative discovered that if you click on the column header between 'Data Type' and 'Class' the order does not change but now editing is available. This, it turns out is a really bad idea. It seems the position the label was in when it was created is preserved, I think this is the unsorted order you get by default. If you sort the list and then delete a label it is possible that the label that should be in that position is also deleted. I have attached a small project to demonstrate this. Open the Global Labels notice the order they were created. Now change the sort order, click on the column header I described earlier to make them editable and then delete the label in position 1. For a while I thought this was the only problem but recently there has been a number of instances where I have created a label, given it a carefully selected address only to discover that it is being overwritten by another variable. I have not been able to work out exactly what is going on but I believe it is connected to the sort order of the labels. Also if you sort the order and change an address, have you changed the address of another label? The only solution I have found is to keep label tables very short so they are managable without having to sort the order, that is probably good practice anyway 1 Axis software limits. I have been using a number of axes in pairs, in incremental mode as caterpillar feeders, using FX5U-40SSC simple motion modules. I had a problem that the axis synchronised to follow would suddenly stop moving, the customer was having to power down the machine and start again. This problem persisted for months with Mitsubishi scratching their heads unable to fathom it out and ultimately stating that the problem must be in my code somewhere. It was suggested by the customer that it may be getting to a software limit, I showed the customer that the software limit was disabled in the setup and it was confirmed by Mitsubishi that it was not the problem. guess what, it is a problem. Once the actual position reached the limit of the double word memory it would stop moving. The solution is the take the servos out of synchronisation in order to set the position (datum) to zero every cycle. Unfortunately the drives do not always re-synch on the first attempt so you have to keep trying till it does, this now causes slight variations in cycle times but it works. Andy EDIT: I have since been informed that to disable the software limits they must be set to zero. This implies that the Enable/Disable setting is invalid and the limits are defaulted to their respective max values. Surely a default to zero would be more appropriate. Label Test.gx3
-
I want some recommendations for a PLC that can hold its memory for long periods of time with no power. I have a customer that has the molds that only get used a couple of times a year and when they are not being used they sit in storage until they need them again. Currently they have a DirectLogic05 controller and what they have noticed is that when they pull these molds out of storage to use them, the program is lost and they got to download it again. They want to make it to were all they gotta do is plug and play basically for this machine. Is there a special module or a processor that can hold its program for long periods of time while it has no power on it?
-
Hello i'm new in all things about plc, i do a project for school and i use a festo fc 34 plc. The plc is programmed via serial port RS232 my pc not support a serial interface and i use a RS232 to usb adapter. when a try to download the program to plc give me a error: "ERROR: Cannot access controller". What i do wrong. Thank you in advance and sorry for my English. Have a nice day.
-
Dear All, We are in need of your expert opinion. One of the nodes of our Crane's Cabin gives a station failure problem, due to which whole Crane shuts down. we have done everything from replacing Dp connectors to changing Profi cables, swapping modules with other stations, changing Power supplies but the problem remains the same. Following are the system details, 1. CPU S7 319 F3 fail safe 2. IM 153 interface module 3. OLM module for signal conversion fibre to profibus from main CPU. We have several nodes after OLM but fault was persistent with 3 nodes. After comprehensive working, it came down to just one but still not diagnosed. I will also upload the diagnostic buffer if needed.
-
Hi ,Im a Electronic Technic in a Molding Factory and i have a problem with one of the machines because is suddenly stoping of execute the code without reason,i tough that was the hmi was is working well.
-
I have an FX3u16MR attached to two FX3u4AD units (right mounted). I am running the first two channels of the eight in 12 bit mode, the next two channels in 16 bit mode, the next two channels in 12 bit mode again and the last two channels are idling. All inputs are configured as 4-20mA. Working with the first channel only for now, what I am finding is that I have to load the gains twice for them to take. It points to a timing issue in the code that I am running in the plc. It just seems to have started happening though. Admittedly I am recoding so the ADC calibrates from a HMI rather than from a PC trigger which is what I had before. But I have just paralleled up the M register that invokes it. I am working through the code as I speak. If anyone has any idea's i would love to hear from you. I know this bit of kit fairly well I am just missing something here and it is bugging me. A problem shared and all that. Thanks in advance.
-
Hi everyone, I want to compare 2 programs with RS logix 5000 compare but logix opens the 2 ACD in L5K, with only tags.... thx for your help
-
I know enough Ladder logic to get in trouble. Although, I do have a few PLCs controlling machines that I wired and programmed and they are running well (as long as I can remember what those buttons I added do.) I cannot figure out how to get memory into the PLC. For example, I have a Counter where I have entered the following: CNT 0005 W1 ( I am driving it with a 1s clock and the reset is an external button.)) I then went to working memory and entered a number as position 1 (I entered 234) When I load the program and press the button to reset, CNT is starting at 0. When I move the W memory from PLC to PC there is 0 at that position. All of the boxes are checked when I compile/transfer. Is my CNT format correct? How does one get the memory to the PLC?
-
HELLO ALL I HAVE PROBLEM CX SUPERVISOR RUN TIME WORKING WHEN I OPEN RUN TIME AFTER 2 OR 3 HOUR IT WILL STOP AND COMMUNICATION CUT FROM PLC I USE OMRON PLC AND MT NETWORK SETTING IN PLC ETHERNET (FINS/TCP) I GIVE ONE IP ADDRESS 172.17.0.85 AFTER CUT COMMUNICATION THIS MESSAGE WILL COMING MY PC - COULD NOT WRITE TO PROJECT FILE. THE DISK IS FULL,WRITE-PROTECTED OR HAS BEEN REMOVED FROM THE DRIVER ple told me some one how to salve this problem
