Search the Community

Showing results for tags 'logix designer'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 174 results

  1. HOW TO CONNECT AB 1769-L33ER ETHERNET /IP TO MOD BUS RTU
  2. Hello guys, I need help. I have an OMRON PLC; CJ2M series which I am not very familiar with. I need to do comparisons, but I see that do that I can't just compare with a value. It looks to me that I have to store the value I need to use to compare in a memory address and reference to the memory address for my comparison.  Is it possible for me to compare using a value and not have to first go through a memory address? Is there a way to use the instruction to store the value in a memory location ? Or do I specifically have to use CX-Designer for me to wrote the value to a memory location? Thanks in advance.
  3. Hi PLC programmers, I got a problem regarding my installation of Logix Designer/Logix5K. Here's the situation... a) Initially installed Studio 5000 without problem. b) I needed to open a program from Logix v20.1, installed RSLogix5k v20.1. After installing v20.1, RSLogix was corrupted and won't open program. c) Reinstalled entire Logix Software. d) Was able to open and convert program from Logix5k v20.1 to Logix Designer v24 but this annoying error occured on v24 (See attached "EN2T")... "Failed to Create Module Profile". All of a sudden, the module (1756-EN2T) I created with working v24 is no longer usable. Now, even when I create a new project, add a module with "Select Module Type", the list of available modules has been trimmed down to what it normally has (see attached "AB_Modtype"). Kept on re-installing entire Logix 3 times, clearing the registry with CCleaner and even deleted installation folder for Rockwell software but the problem is never gone. I even downloaded AOP for EN2T and installed it but to no avail. Now I'm lost and dumbfounded that uninstalling and reinstalling isn't working. By the way the OS I'm using is "Windows 7 Enterprise". I appreciate all the help I could get. Thank you very much. Sincerely, Andrei K.
  4. Hello there, I've done some reading through GT Designer3 Version1 Screen Design Manual (Functions) and in chapter 30.3.6 - Program examples I've found functions used like: redraw_object(); d_circle(params); or acces of object params via script like my.active = 0; my.text_color = 0xE0;   So, my question is, does anyone of you have/know about documentation for this advanced stuff, it could be real game changer for me.   Thanks in advance for any reply
  5. I want to have 2 languages on my display ,created with CX Designer.How can make multilingual message and button by click some button like "Change language" ?
  6. Howdy, So the program I have has linked up and I've downloaded to the Omron NS-10 just fine... other than when I go to certain screens the text from all the descriptor labels are gone. I can't figure out if its a setting or if its just getting lost in transmission somewhere. Halp. Thanks,

  7. How to Use Frozen Screen

    Jun2580 posted a topic in CX-Designer

    I am working on a project with multiple screens, but all of them share the same logo pane at the very top. I don't want to add this panel for each screen. I would rather have the logo pane as a separate screen, and freeze it at the top of each screen. Is this possible?

  8. GT DESIGNER 1000 SERIES

    shaikhasim posted a topic in Mitsubishi

    IN GT DESIGNER-3 TOOL---->OPTION,   SHOWING THE VALUE OF OUT OF VALID RANGE.  KINDLE GUIDE ME WITCH RANGE I HAVE TO SET BECAUSE  IN BOX DEFAULT IS 25.   FOR HELP I ATTACHED PIC  
  9. Hi,  I am writing some routines to decode the data from my Input: data array to User-defined Array Parameters. Is that possible to have a generic routine to decode data coming from more than one module? I have two Module ENode and ENode_1. I have defined User-Defined parameters for the module. Can I make a generic routine to decode the data coming from these two modules and put them in the defined arrays?  the two arrays ENodeData[0] and ENodeData[1] have the Generic User-Defined parameters.

  10. edit comment directly from got

    kurokage posted a topic in Mitsubishi

    hello everyone using gt designer 3, got 2000 series and IQ-R series want confirm something. it`s possible to edit comment group (that use for history, fault,etc)  directly on GOT using GOT tool or object or script? for script, searching on gs, gd list but find nothing. where the comment group is saved? thank you  
  11. Hi, Is that possible to define INT data type in EDS file so the Tags for the module in RS Logix Designer would receive INT data type in Input Tags not SINT? As marked in the image, the Logix Designer is receiving data as SINT but I want to have INT data type. Thanks Muhammad Azeem
  12. I have a "paddle wheel" style flow meter that I am trying to wire to my Micrologix 1400. It is a three wire device and there is a tag on it that says it can run at 6-36VDC. So, naturally, I thought to wire this to one of the HSC inputs of the Micrologix directly. I hooked the ( + ) on the meter to 24V, ( - ) on the meter to common, signal to the oscilloscope, and ground on the scope went to common. I see a small 60Hz sine wave @ like 5mv when the wheel is not turning. When the wheel is turning I get a small square wave but in the same mV range. It is not a nice smooth square wave either its all jumbled up with the 60Hz sine wave.  I hooked this thing up to a transmitter and scoped the signal and ( - ) in parallel with the wheel - I get a nice smooth square wave signal when the wheel turns. It is only at 4.5V though. My questions are? Why does't the paddle wheel give me what I am expecting directly? Also, what is the voltage range on the pulse that a micrologix will see? I am assuming that it will not count a wave with a 4.8V amplitude.... Thanks for your help in advanced! neech   

  13. Cimplicity 7,5

    KAZ posted a topic in GE

    Good Day There is a SCADA Cimplicity and controller Control logix 5561 AB. Communication between them is organized via Ethernet IP. It is necessary to transfer some tags from the Cimplicity to the controller Control Logix. How to do it better? Through Rslinx DDE OPC or write scripts in the Cimplicity? 
  14. 1.Can anyone say how can i communicate control logix plc with ethernet to serial converter. here i am not having any eds file.

  15. Version 1.0.0

    83 downloads

    E-Designer_for_E-series_English.pdf
  16. E-Designer_for_E-series_English.pdf View File E-Designer_for_E-series_English.pdf Submitter CJ2M2016 Submitted 09/09/17 Category Manuals, Tutorials

  17. FX5U With E-terminal

    niklas posted a topic in Mitsubishi

    I was looking for what drivers that should be used when connecting the new FX5U plc with the older E-1000 series (E1100 in this case) in e-designer 7. Intended connection method is ethernet on the FX5 (obviously) to Ethernet on the E-panel. I am sure this question will come up for several users so let's keep this thread as clean as possible. Has anyone done this Before? Here are the options available: /Niklas

  18. multi-screen alarm check/deleting

    smokey88 posted a topic in CX-Designer

    Hi All, I have a requirement from a customer to acknowledge alarms from either of two  NS15 HMI's in the system. Can anyone provide info on how I may be able to acknowledge or delete alarms on one HMI which would also acknowledge or delete said alarm(s) on the second panel?  Both of the HMI's are polling one controller for alarm status so I assume that each time an alarm is acknowledged or deleted it would have to alert the controller which would then send something to the second HMI to clear the alarms? Any help is appreciated.

  19. Track NS series IP addresses

    b.k.n. posted a topic in CX-Designer

    I am using the NS series touch screens and NS-Runtime. Do they have a System word that stores the IP address of that touch screen or PC running the NS-Runtime application. I want to be able to trigger different functions in my project depending on the IP address.
  20. I'm trying to overlay a text figure on top of a bit lamp. You'd think it'd be easy... but no matter what layer I set the lamp to, or how many times I click "Move to back of layer" from "Stacking order" in the right-click menu, the text figure stays behind the lamp. The only reason I'm using a text figure vs. just using the text function of the lamp is because I want the text to be vertical - a feature that you do not have with the text function of a lamp. Any ideas on how to fix this? Any help is greatly appreciated!

  21. CX Designer using tables - Help

    smokey88 posted a topic in CX-Designer

    Hi all, I have been getting to grips with the different graphic displays in CX One Designer but I am having trouble trying to produce a table which shows column one as a label and column 2 as data value that I am polling from a Modbus slave. From what I have read/tried the data block table seems to require a csv as the data source and I cant seem to achieve what I want with the standard table. If anyone can advise how I might be able to achieve this I would be extremely grateful. Below is the sort of thing I'm hoping to achieve but in a table format:   Bearing 1 Temperature 80°C Bearing 1 Vibration 0.2 mm/s²         Bearing 2 Temperature 82°C Bearing 2 Vibration 0.2 mm/s²  

  22. NS10 system program update?

    Chickenkiller91 posted a topic in CX-Designer

    Hello, I would like to download my project to the NS10 -v2 but i get the following error:   I kind of remember that it was p;ossible to update this automaticaly in similar cases, like 8.7->>8.8 or something like that, i just clicked on okay and it did it automatically. But after ok the application just stucks on loading, NS restarts, in case of ethernet. I tried it with usb, it just quits after ok, and nothing happens. How can i upgrade the NS10 to 8.8 or 8.7 or 8.9 to be able to download my new project??  

  23. Got2000 and gxworks3

    Ligglogg posted a topic in Mitsubishi

    I need help i have a got 2000. I developer my software for the hmi with gtworks 3 my problem is: when i update my software in the hmi over the USB cable with my Notebook then i become an error message after reboot. the error message is: communication error refer to sytem Alarm in utillity menu. At the moment i must disconect the hmi from the current and then it works. can everbody help me?  
  24. Could someone please generate PDF report for the ACD files on the attached .ZIP file? They are all RSLogix 5000 v20 files, I needed them for a university report which the deadline is today, but I don't have access to a computer with RSLogix 5000 :S Thanks!  ACD_files.zip
  25. Has anybody tried communicating Allen Bradley 5069 Compact logix PLC with Red Lion HMI ?  I am unable to communicate them in spite of adding AB tags via L5K file which gives me no error. I am able to see all the tags in Crimsion 3.0 software in development mode.  However, PLC & HMI are not communicating with each other. I am able to ping to both, using the same program in PLC of which I generated L5K file.  I think it may have something to do with the driver as 5069 is a new line of PLC Rockwell come out with only in 2016.