Search the Community

Showing results for tags 'logic for monitoring the cha'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 51 results

  1. Emerson 90-30

    Jtech posted a topic in GE

    I'm working with Emerson 90-30 on proficy machine edition and I'm trying to use a string variable to display words on a graphical panel in target 2 but withing the code itself on target one I cant seem to understand how the reference address works? can some one explain how string variables function and how to use them?
  2. As the industry of plc and scada softwares continue to integrate more and more programming languages into their IDE, what is the most common language that should be learned by controls engineers (excluding Ladder Logic)?  I mainly use Python and VB for scripting but I am curious what languages other SCADA and PLC programming environments use. Should I be sticking to a specific language and learning it well or just know a little bit of them all? Let me know your thoughts!!
  3. Newbie in the field of Automation here! I have a waste water project that requires operating 6 pumps to empty a sump. The water level in the sump is being monitored by an analog ultrasonic sensor. The analog range is divided into 5 levels; level 1 being the lowest and level 5 being the highest. The way the pumps operate is analogous to the water level, i.e., 5 pumps will run at level 5, 4 pumps will run at level 4, 3 at level 3, 2 at level 2, and only 1 pump will run at level 1. The sixth pump is used to run the pumps sequentially and that's where I need help. Basically, the pumps can not be assigned to a certain water level as this would result in the pumps at the lower level run way more as compared to the pumps assigned to higher levels. The pumps need to alternate so as to keep the running hours of each comparable. Another requirement is that say if pump 1 turns on due to water level rise and then turns off due to water level fall, and again if the water level rises, then the next pump should start instead of pump 1, and so on for the rest of the pumps. Also, if one pump goes on some kind of fault, the 6th pump comes in and runs in its stead until the fault is reset. I'm trying to come up with a ladder program to make all this happen but hoped that I could find some help online. I feel like this is a common project and there should be someone that can give me the proper solution. With thanks, Aafaq.
  4. What are the types of fuzzy logic syatems and it's applications? Is the fuzzy systems based on the vague value or real values? What are the real time applications of fuzzy logic. I am writing a thesis at best essay writing services on fuzzy logic and it's applications.

  5. Simulator error

    Krishna dakhane posted a topic in Allen Bradley / Rockwell Automation

  6. Hey, (Programming a M224 with Machine Expert Basic) I'd like to get some input from you guys about a logical task: I have 8 contactors controlled by my PLC outputs, they heat a water boiler. throughout my operation, I require a different amount of heaters (I could move between 1-8 heaters in a single operation) I would like to scramble what contactors I put in use every time I start an operation, in order to not constantly use the same heating elements and wear specific ones out. For example, in the first stage of heating I will use contactor #1, next time I start the operation I would like to use contactor #2 and so on.. How would you approach this problem? SBR? Timers? Thanks
  7. Hi, Could anyone help me out on how to extract the digits present in a string in sysmac studio... Thanks in advance !!!
  8. Hello Everyone, I am writing one logic and need some help regarding that logic.   CURRENT LOGIC -  -There are two timers TON_1 and TON_2. -TON_1 timer will start as soon as PLC turns on. -After the done bit of TON_1 timer, the TON_2 timer goes on. -After the done bit of TON_2 timer, again the TON_1 timer will start. -This logic cycle will run continuously, both timers will run turn by turn. Code (Codesys/Schneider Eco Structure Machine Expert)- PROGRAM POU_1 VAR      TON_1: TON;     TON_2: TON; END_VAR TON_1(IN:=(NOT(TON_2.Q)) , PT:= T#100S); TON_2(IN:=(TON_1.Q) AND (NOT(TON_2.Q)) , PT:= T#20S);   Actual Requirement -  -There is a BOOL tag. -If the BOOL tag gets high during the TON_1 running, the logic should move to the TON_2 immediately. -If the BOOL tag does not get high during the TON_1 running, the logic should move to the TON_2 after completion of TON_1. -after the completion of TON_2, again restart TON_1. -Logic Runs continuously in a cyclic mode.   Give me your valuable idea to fulfill the logic requirement.
  9. Hello everyone, I am new to PLC programming and will start working on Allen Bradley PLC. I have an experience in computer programming languages. Will learning ladder logic be a better option or starting with structured text as i have some knowledge about the syntax and programming of structured text?
  10. I'm doing some remote support on an FX5U with GX Works3 on the remote desktop. I've been doing this for a couple of weeks without difficulty. Yesterday the ladder monitoring stopped working. There is no ladder contact monitoring showing and D registers and timer values are blank. The Watch windows are working correctly. Online Write Monitor is selected in each case. All Tools | Options seem correct and match my local copy of GX Works3 that I used on site. Any ideas?  
  11. Is there any way to monitor ethernet/ip bus, states or faults and to make an alarm to the panel alarmlist. I am using IO-stations (1734-AENTR) and I would like to monitor somehow the system. I feel that reading the slot status of the 1734-AENTR device is not enough, because it is not possible to monitor all the cards in a slot. How to get alarm on a screen if I lose any station on the ethernet/ip bus?
  12. So I have a plc program where most of the outputs are based on a counter that goes from 0 to 1000. The counter speed is adjustable and is generally set to run through a full cycle (count from 0 to 1000) anywhere between 0.5 to 2 seconds. The problem is, when I try to energize an output by using an EQU instruction, it will almost always skip the count because the scan time is not fast enough. I've been using a LIM instruction which has been working, but its not quite as accurate as it needs to be. I switched the counter logic to be continuous to try to make it faster which made it almost perfectly accurate... But only in the continuous task; it made the other periodic task significantly less accurate. I was curious if any of you had any tips on how to remedy this or just general help. I am still relatively new to PLCs and ladder logic so any advice would be awesome, Thanks in advance! Edit: The purpose of the counter is to cycle through from 0 to 1000 over and over again. My outputs actuate during a certain interval within this cycle (For example I would say actuate from 300 to 800 and it would stop and end once it hit those values via an EQU or LIM instruction). I wrote the logic as follows: First I calculate how many cycles per minute I want to perform, using that value I calculate how many times I want to increment my counter per millisecond. Then a timer is given a preset of the total cycle time. While that timer is running I continuously multiply the timer's accumulated value by the "cycle count per millisecond" that I calculated earlier; the resulting value is the current count that all my outputs are based on... Hopefully that makes sense, I know it's not the best but I could not figure out a better way of doing it and I know rounding is certainly making the accuracy worse. My hardware is: Allen Bradely PLC (5069 l306erms2), 5069-ob16, 5069-ib16, and a Kinetix 5500s2 Driver for my motor(s)
  13. Hi there, I am fairly new to programming serial communications, especially with Mitsubishi PLCs. Can someone walk me through in ladder logic how to bring in ASCII to the PLC, store the data in the data registers. Then send the data out to another PC once an 'X' input is satisfied? ASCII code would go like the following: C2,0,1,123,2,ABC,3,456,CR

  14. FX3U PLC Monitoring with Ethernet Setup

    Akhmad Zaki posted a topic in Mitsubishi

    Hi all,  I want to ask some questions regarding Ethernet Communication with FX3U PLC series. I have 2 PLCs of FX3U series (FX3U-48M and FX3U-64M) and I want to monitor its data (input and output) using ethernet communication in real time. My questions are: 1. Does FX3U PLC have ethernet port so I can connect it directly to my Laptop/PC? 2. If no, do I need to use FX3U-ENET-ADP and can it be used for 2 PLC or only 1? 3. What software do I need to use to configure the communication between PLC and FX3U-ENET-ADP? 4. Does this configuration change the existing PLC program? 5. Can i transmit the data wireless-ly using some kind of ethernet to wifi adapter and what additional hardware do i need for that?  
  15. We have been working with PLCs for long time. We used to develop PLC logic, partly test it on an emulator and test the rest on the partly energised equipment. From time to time working with computer software development (C# and JavaScript) I was always looking for something similar to unit testing in the PLC world. As I couldn't find anything at that time I've started developing own automated testing tool. Now we use this tool, which basically simulates PLC inputs in defined actions and checks expected behaviour of internal tags or/and PLC outputs. If it behaved the way we expected, it's PASS, otherwise it's FAIL. We break complex logic into small parts and create unit tests for it. By creating more of these unit tests we can test PLC logic of any complexity. The software called PLC Logic Prover and it's free at https://www.controlx.io Recently, I've been told that there is no point to develop anything new if there are already great tools on the market. Honestly, I didn't do proper research earlier, so I'm here asking the experts. What do you use to test PLC logic? What automated testing tools do you use? Is it using IO simulation or it can test logic by other means? Your replies are appreciated. Thanks, Alex
  16. Hello all I am have FX3G PLC, where i am trying to use SPD function for speed monitoring and controling. currently i am working on software only. I am using x4 as input (s1) , sk1000 (s2), and d4 (D) in monitoring mode when i am forcing X4 to ON/OFF ,  there is no any value change occure on d4 i have tried to change the s2 value from k1000 to k10000, but not fruitful i need your valuable support to confirm that my primary setup is correct or not and what things are required/missing attached program screeshot  
  17. A little background information here, I am trying to create a moving average so I accomplished it with the code (imaged attached) The problem i am having is the AVE instruction error bit goes true. it leaved me with a result of 1.#QAN  I did some googling and it said this is typically done when dividing by zero?? so i added a NEQ to 0 prior to loading the array. then it happened again. so i put the error bit in front of the FFL so it will stop loading the array when i get the error bit so i can see what values are in the array when it errors out. Has anyone else had this issue and what could you do to resolve it? I haven't had any luck find something that points me in the right direction. Thanks in advance for your help.

  18. Monitoring a register

    TOM_80 posted a topic in CX-Programmer

    How do you ensure a time value in a memory register coming from an external device is constantly changing in an omron cj2 plc and trigger an alarm when it stops. At my company we scan in a work order with a barcode scanner tied to a different network than the one the plc is communicating to. We use a specific register in memory to determine if these two networks are communicating. We use a date time value in seconds going to that specific register, as long as the time continues to run we know we have a communication link. If that time ever stops in that register we know the communication link is severed. I need to know if there is logic that can be written in the plc to notify an operator when there is no communication link.
  19. Hi, I've been having a problem with my Schneider setup, and I can't seem to figure out the problem. I'm using Machine Expert Logic Builder and Vijeo 6.2, and I can't seem to download to my PLC. I can download to my HMI just fine, but my HMI comes back with the message as mentioned in the title. Also when I perform a full download, machine expert comes up with the message "Could not connect to the device for item "xx", selected target system "PLC name" is different from the connected device "HMI name". The weirdest thing is that machine expert shows my PLC just fine, but doesn't show my HMI. I have no idea what to do, as I feel like I've tried everything. The IP range is fine, subnet is fine. The driver in IO manager in Vijeo has the PLC nodename in it, so that shouldn't be the problem either. Does anyone know what to do in a situation like this? Thank you in advance!
  20. Please could you assist with the software required to download data tables from 4 off DIRIS A10 Multifunction Meters into TM221CE40R Logic Controller via TMC2SL1 Comms Cartridge using Modbus Protocol over RS485. I have downloaded the Modbus tables from Socomec but not sure how to get these into the PLC. I would really appreciate your help in achieving this. I am using EcoStruxure Machine Expert - Basic to program the PLC & DAQ Factory Developer Release for my Touchscreen. Link to Socomec Modbus tables: https://www.socomec.com/files/live/sites/systemsite/files/SCP/6_gestion_energie/diris/diris_a10/DIRIS-A-10_COMMUNICATION-TABLE_2018-01_DCG01013_MULTI.html#General

  21. Control Panel

    cjcygan posted a topic in CX-Programmer

    Is it possible to view the values / states of all inputs, outputs and workbits (e.g. 64.00 through 64.15 on Omron CQM1 PLC) on a single screen or control panel within CX-Programmer software?  I'm trying to troubleshoot some ladder logic that I wrote and need to know the values of 5 or 6 inputs/outputs/workbits simultaneously.  Having to scroll up and down through my ladder logic repeatedly does not work well with code that changes state every 5-10 seconds or so. Any help is welcome.

  22. Q03UDVCPU

    Raalen posted a topic in Mitsubishi

    I am new with PLC's and I am learning how to work with GX Works 2. I have two questions, 1st Question: Using a Q series PLC (Q03UDVCPU) Is it possible to convert the language of a project from ladder logic to structured text? 2nd Question: If I read a project from a PLC why is it always ladder logic? Is there any way to read out structured text?
  23. Hi I'm looking for Ladder Logic code that I could use for a plastic injection molding machine.  I am willing to purchase and/or modify existing code to meet our specifications.  We have lost the Ladder Logic out of the TI/Siemens Controller on our Newbury 100 Plastic Machine so we're looking at replacing both the PLC and the HMI interface with an Automation Direct Controller.  We have the HMI Basic Code for the Newbury but not the ladder.  I've pasted the manual below for our machine.  Any assistance would be much appreicated.  The manual was too large for me to post but I've posted a document with information about how we intend to upgrade which has a little information about the machine also. Newbury 100 upgrade logging.docx
  24. Hello! I have a project where I need to use Allen Bradley PLC, it might be one of CompactLogic series. In scope of the project I need to transfer few real values to DirectLogic PLC that installed on customer side. DirectLogic PLC has installed ethernet card that support Modbus TCP, TCP/IP and UDP/IP protocols as it says on automationdirect website. I start looking for Allen Bradley PLC that support Modbus TCP or TCP/UDP protocol and did find clear information. Could you help me to find out a way how I can pass the data to directlogic PLC from CompactLogic?   Thank you in advance!   Regards, Scotty
  25. I have a level measurement system by fmcw radar (Rosemount tankradar), for a filling-emptying process, of very large water chambers. Very sporadically, the radar is momentarily lost and measures 4 to 7 feet below the actual level, only when filling the water chamber.  Sometimes the measurement freeze in the middle of the filling process.  Due to the criticality of the process, this behavior is dangerous, as it can cause flooding inside the plant This behavior is very sporadically so we are baffled about the root cause of this problem.