Search the Community
Showing results for tags 'load configuration'.
Found 35 results
-
Hi All, I was wondering if any of you guys could help me about improving my load sharing application. At the moment it's very unstable and i can't see what i am doing wrong! Thanks. Details: I am trying to run a industrial chain conveyor using Torque control by Real sensorless vector control function of A700 Mitsubishi VFD. I have been following "Technical Note" which is provided by mitsubishi (see attached PDF). As described on technical note, i am trying to control 5 motors ( 1 X 2.2kW, 4 X 1.1kW) to share the load on this chain conveyor. Torque command (SV) and Motor Torque (PV) read from Master VFD and PID output (MV) of Q03UDE transferred to Slave VFDs over CC-link. i would appreciate any information and help you can provide, Many Thanks. Application_Technical_Note_Load_Sharing.pdf
-
Hello every one. can any one explane me maximum how many CC link card we can configure in one QJ61BT11N module. and whwt is difference between CC link and Input/Output card
-
Hi ALL, Am trying to configure a PCM 301 (LM 90 30 Communication Co Processor Module) What software do I use,is it TERMF or PCOP? And where can I buy this software Thanks
-
I am experiencing a serious problem. Everything went fine in my project for month. Yesterday when I "Transfer to Controller" (like I use to do several time a day) I got this Message : "Build is not complete. Process was aborted". So I build again, I Rebuild controler, I restart SysmacStudio, restart the computer, reset the hardware on the project ... nothing worked. Always the same message. So I opened a previous version of my code. Since it was allready built when saved, I had no problem transfering it in the controler. However, the moment I change a line (have to rebuild) on this backed up version... same problem appear. I finally got to the "output windows" (Alt+3) where I saw ALL build are failed. I've contacted my Omron representative and he is trying to help but he seem as lost as I am. Please help if you can, I am using Sysmac Studio 1.13 on Windows 10. I also have a HMI wired to the project and everything work fine with it.
-
I am having trouble loading the configuration into a Micro984-230. I lost an old M84-002 PLC. I have the program. I purchased a Micro994-230 replacement. I lost my cable, so I made a new one. The only software that I have still running is Updoc 4.30b. I tested out my cable and Updoc by connecting to a 984-381. Everything worked fine online and offline. The error I get during the configuration loading is communication error 13. I have no idea what that is. Perhaps I can't do configuration loading with Updoc. I have Modsoft Lite working but I do not think that it works with this controller. It is for MIcro and Compact controllers. I may have modsoft and taylor kicking around but I do not know if they are installable or not. I hope I can find out if my config is improper, I have used the wrong controller setup file (used Micro984), or where iI can have the config loaded for me? I also do not know if this used controller is functioning correctly.
-
hello guys .. am the new guy in this forum I am having a problem with CPM1A-AD041 configuration. Please suggest what type of operands (Data Type, Address) should be defined for the selected operand (see attachment drawing). This example is taken from the module's configuration manual for CP1H CPU Unit (WA450-E1-06). CPM1A-AD041 works with CP1H-XA40DR-A. thanks in advanced :)
-
ControlLogix Redundancy Ethernet/IP IO Configuration
andreik posted a topic in Allen Bradley / Rockwell Automation
Hi, Good day to all, I got a situation regarding the redundancy configuration. Please refer to the image attached (Page 26, Enhanced Redundancy User Manual). Notice the 1756 ControlLogix I/O inside the green box! The chassis hasn't got a CPU but only has an Ethernet IP module for the entire chassis. Does anyone know how to add and configure this chassis to the I/O configuration tree of RSLogix5K (Logix Designer 5k)? On my configuration, I've also inserted 2 MVI56E-MNETC Modbus TCP/IP Module in addition to the standard I/O Modules. Is my configuration possible? I appreciate any help I could get, thank you very much! Sincerely, Andrei O. Karunungan -
I have restored a crashed IFIX to a new PC. The restore is ok and installed GE9 driver. With the GE9 power tools, we can observed that data transmits and recieve. The problem is that the screen scada is not updating i.e. no status/feedback, anything is happening. The LAN network TCP/IP was configured i.e. IP, subnet and gateway. Any remedies/advice is most welcome. Please provide a guide on the communication/configuration setup. Thanks
-
Spectrum Controls 2080sc-IF4u Analog Module
Damica posted a topic in Allen Bradley / Rockwell Automation
Has anybody used the Spectrum Controls 2080sc-IF4u analog module? This is a 4 channel analog module for the Micro800 series? I'm trying to set input 4 to (0-5v, x10(format)2-wire, 60HZ). I need someone to help me figure out the bit setting. This is what I have LSB=44 and MSB=44 could some else confirm this? Thanks -
Dear All, I really appreciate in advance your help in this problem. This is my first project with Mitsubishi PLC. I am using GX Works 2 for programming. Hardware is FX2G-24M base unit + FX2n-16EX extension module. I already started a new program and download simple rung on PLC, put PLC in run mode, test it and working properly. the problem is that I do not know what is the address of inputs of extension module. I tried to complete and use X016 but no response in PLC. kindly advise what shall I do. Thanks
