Search the Community

Showing results for tags 'kinetix 300 ethernet/ip enable'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 275 results

  1. Hello All, I would like to control Powerflex 525 drive with Omron NJ301-1200 PLC via Ethernet/IP (Set speed, start, stop). I've gotten until the part where I downloaded the necessary .eds files of the drive and imported into my Sysmac studio. However, I'm stuck after this point while assigning target variables and Originator variables and eventually setting speed and controlling the vfd. I've attached images for your reference.
  2. I'm trying to understand the basics of using a serial to ethernet converter such as this Comtrol DM-EIP-2101, with Studio5000 code. Basically I have a weighing machine that only outputs data via RS-232 and I need to send that data to a PC that will process it through a Studio5000 program and have the data displayed on an HMI using FTview SE. Is it as simple as just connecting the serial and ethernet to the converter and it does all the work? Obviously checking ip addresses and firmware will need to be verified. The main thing I am unsure of is the process of passing the individual data packets from the machine to the Logix code on the PC,  things like what the weight of the item was, was it over weight or under, etc....  Would there be an AOI or tags built into the software for a machine like this Checkweigher? I've worked with much smaller items like Cognex Dataman cameras and I know you can just use their AOI that allows you to simply call a tag if you want to display information like if a scanned barcode was correct or whatever. If anyone has done something similar I'd appreciate any guidance. It can be difficult getting the information from the manufactures so I'm looking for answers anywhere I can. EDIT: I guess I should also clarify that only using one or the other (serial or E/IP) is not an option. It will be a serial connection from the Weighing machine to the converter and then Ethernet to the PC.
  3. I'm trying to set up an Ethernet/IP communication with a CIP block between a Micro850 and a SMC EX600-sen3 pneumatic Module. I can read the inputs of the module with the configuration below, but I CANT write to SET or RESET the digital outputs. There are NO errors showing communications issues in the CIP Generic Block I am using... I read that for some reason, it seems that there are problems with writing thru Ethernet/IP protocol between Micro family and other devices not from Rockwell... Does anyone know if there is a way to make it work? Configuration that is working to READ: CIP Service Code:     14 CIP Class ID:         4 CIP Instance ID:     100 CIP Attribute:         3 CIP Member ID:         0 Configuration that is NOT working to WRITE: CIP Service Code:     16 CIP Class ID:         4 CIP Instance ID:     150 CIP Attribute:         3 CIP Member ID:         0

  4. Hmi modbus TCP/IP device communication

    mustafa.celik posted a topic in HMI & SCADA

    Hi all; I have Delta DOP110 IS hmi and i have a modbus tcp device. I want to communicate hmi and device with modbus tcp/ip but i didnt understand device's register address. For example, input bytes 0,1 analogue control word, What is the register address? 40.000 or 40.001 can you help me ?  
  5. Hello all,    I have 3 kinetix 5500 drives connected in series but some how the 3rd drive lost power. all the fuses in the cabinet look good. nothing else is tripped either.    any advice is appreciated.  thank you   

  6. GOT1000 HMI with Q03UDE PLC issue

    python01 posted a topic in Mitsubishi

    I have a bit of an issue with communication between GOT1000 HMI (I think the exact model is GOT1675V) and Q03UDE PLC over Ethernet. The GOT is set to 192.168.1.4 and PLC is set to 192.168.1.2 but I get the error "Communication Error. Refer to System Alarm in Utility Menu". Now how do I access the utility menu? I have tried to tap and hold on the upper corners of the HMI but nothing happens. I also can not switch between screens when I press buttons even though they are directly linked via screen #. Almost like the HMI froze up. Wonder if anyone had similar issue and what the solution might be. Thanks for your help.
  7. Hi! I would like to ask your help. I want to know more about the communcation systems what allen bradley use. Most important for me, is Ethernet IP communication, Controlnet communication, Sercos (servo) communication, maybe devicenet communication.  I know I can find some manulas on the web, but I thought I ask it here too, maybe you guys have some more documents which is contain more information. Every information is highly appreciated. Thank you very much guys.  
  8. Hi I am looking for a way to read and write data from PLC omron words, bits via FINS or EtherNet/IP protocol using python programming lang. Does anyone have any results in this? I really want to see your work, because all my attempts have failed. Thanks.
  9. I am new to automation systems and devices and I just want to know how to connect two HMI's (each one would control different things) to one PLC using Sysmac Studio and NB-Designer via Ethernet. The model of the PLC is NX1029020 and the HMI's are one NB10W-TW01B and an NB7W-TW01B. I searched for info about this topic online but I couldn't find anything that worked for me, I saw an article from OMRON where they connect two NB's to the CP series, but in my case, NB designer doesn't allow me to insert more than one HMI in the same project, I also found something similar on a youtube video that gave me an idea about how to connect multiple HMIs exporting the pks file and importing it to another HMI project but I still can´t figure out how to add both to my PLC. I would thank you a lot if you could help me with this because I know it's not a rare implementation, just I haven´t found the right way to do it. I also leave the links to the Omron article and the youtube video I found. https://www.myomron.com/index.php?action=kb&article=1554 https://www.youtube.com/watch?v=rXx5lut7G9I
  10. Hey all, I am having some issues with a Keyence IV2 camera which has Ethernet/IP functionality.  To summarize briefly, it has been configured and reading the data into my PLC (NJ501) into a structure data type.  The issue I'm having is that I cannot control this on a bit level for triggering the camera, etc.  I was reading that a Union type is the way to go, but unfortunately, I stopped getting data into the PLC when setting it up that way.  According to the configuration guide for Rockwell and setting it up in the Network Configurator, I needed to go with the SINT type.  When registering the device, the 8-bit option was necessary since the Input/Output sizes needed to match.  This was predetermined by the EDS file for the IV2. I am stumped as to how to get the data to read into the Union Type, and any suggestions would be greatly appreciated. Thanks, -K  
  11. Hello, I have to make communication using Ethernet between omron CP1H and siemens s7-1500 plc. I was thinking about Modbus TCP or Ethernet IP using theese adapters: Modbus TCP - CP1W-MODTCP61 Ethernet IP: CP1W-EIP61 But I am quite new in Omron, and I am looking for some exapmple codes, FB. Do you anyone have experience with that?   Thanks for all responses.
  12. Hey y'all- I have an application that uses an Allen Bradley servo with a brake and a linear actuator to lift a plate vertically. While maintaining a position, the servo drive (Kinetix 5500) will occasionally fault due to over-torque.  I'm thinking it could possibly be due to mechanical issues i.e. bearings in the actuator but my initial thought would be that it would fault while moving up/down as well, so far I've only ever seen it fault while holding a position. This leads me to suspect that there may be something off in the control loop. I'm not involved in the setup but I know we use load observer and I reckon we use auto-tune. Other than that, I wonder if it's something to do with the brake. I also read about mechanical resonance in the manual which seems like a stretch but it could be contributing, the frame that the actuator/motor is attached to does vibrate a fair bit.  I'm familiar enough with basic motion control using Allen-Bradley and understand the basic concepts behind the servo/control loop. However I'm at a loss for why the servo/drive would spontaneously over-torque while maintaining a position.  How would you guys approach troubleshooting this further/solving this issue?  Many thanks!
  13. Good day everyone, First post here so hopefully I'm not violating community guidelines in anyway. I've got a system that has some 50 odd Micrologix 1100 and 1400 in use and I'm currently working on setting up an auto timesync for all of them using just 1 of the PLCs that will be my master time PLC. So far I've put together the logic for all the message instructions with the corresponding IP of the slave devices. I'm running. Into an issue with not being able to terminate/break the message connection on a PLC that I have already synced. Is this even possible to do on the ML1100. Once I get to 16-17 messages DN it starts to ER and will not complete any further messages. What I have is a message instruction ladder with a timed trigger to activate a MSG and write the RTC data then time down and connect and write to the next and so on. When it triggers the message instruction of one PLC it also fires an OTE to trigger the BK of the previous message instruction. However it doesn't seem to be actually cutting the message connection and holds it persistent until a power cycle/download event.
  14. I want to establish Ethernet IP communication between the following PLC CPUs. Schneider Electric - BMEP582040 Honeywell - ControlEdge UOC CPU900-CP1. Where the Schneider must be master and Honeywell must ne adapter. Let me know if anyone have done this or can help me to do so.

  15. QCPU to 2x kyence iv2

    sczot posted a topic in Mitsubishi

    Hello all, we are using Q03UDECPU and via built-in ethernet port its connected to two IV2-G30. (through unmanaged switch) to establish connection we are using FB LQnUDEEthActive (hereinafter referred to as  FBLQ) two instances of FBLQ in two instaces of our FB which is responsible for creating messages that are then send via FBLQ Both keyence devices have different IPs, ports and connection number. Problem is that it is working flawlessly, except the time its not working :/ from time to time it simply doesnt trigger Keyence device. It looks so far like its independt of turning machine OFF/ON, also both keyence devices are used in different times (about 10-20seconds of difference) Im currently working on sime kind of internal diagnosis to see whats happening when its not working, but im just curious if there is something obvious we are missing? any help will be apreciated Thanks  

  16. Fatek Ethernet PLC Module online

    Yasir_66 posted a topic in Other PLCs

    Dear All,  Anybody can help me in communication between Fatek 20MAR2 & CBEH2A. The jumpers setting are JP1 is on left two pins (No password protected) & JP3 is on right two pins (forced boot operation mode). The Ethernet cable i used is type b T568. Fatek Ethernet module config software detecting module successfully (shown in attached pic) but on online PLC via ethernet cable its showing connection failed.   please help   thanks in advance
  17.   Mail me for Help if anyone is stuck during coding and settings.
  18. hello Every one,    I am using a CP1-L PLC and want to communicate to domino ax350i printer over TCP/IP socket programming. For socket programming, I used Omron Function Block CPU012_SendCommand.  I defined network ID and node address. However, I am getting 0502 error which means routing table is not set yes. So, how can I set routing table for both devices?. my PLC on 192.168.250.1 and Printer is on 192.168.250.123 node 7000.    Can any one suggest me best way to do.  Thank you   attached file is for what I did in setting and program for the communication.      

  19. Monitouch HMI slow screen

    Robror posted a topic in HMI & SCADA

    Hi there! I'm having some issues with a FUJI MONITOUCH V9100iSD HMI that communicates with a CJ2 PLC via Ethernet. This HMI is a migration from a previous V810iSD model. The thing is that the previous model worked correctly, but when using the new one, the HMI seems to be pretty slow when switching screens, for example. All parameters are the same, and after reading Fuji's FAQ, I've run out of ideas. Have you faced the same problem? Thanks in advance!

  20. FX3U to FX3U via wifi

    waynes posted a topic in Mitsubishi

    Good day fellow PLC ninjas! I have a question/ concern which I would love your opinions on. We have 3 FX3U PLC’s+ENET cards. Two of the 3 PLC’s move around in an EMS trolley. The other is a ‘base station’ with a GOT2000 connected via Ethernet. Base PLC IP = 192.168.1.11 HMI IP = 192.168.1.31 Carrier 1 IP = 192.168.1.61 Carrier 2 IP = 192.168.1.62 I have programmed the base PLC to use Active communication; we are using fixed buffer communication to send and receive data to/ from the Carriers. The carriers are set up as Fullpassive ‘slaves’. This part works well and the update time changes (using a counter in the base station) from 1s to 100ms (because it enters a different work station).  My issue is the following: using a network sniffer (WireShark), I pick up plenty of re-transmits and sequence number errors coming from the base PLC’s ENET card. This is troublesome and causes delays when the update time is required to be fast (100ms). I am sending and receiving 10 words of data. The wifi seems stable, and there is minimal noise in the area. The power has been turned down and the antennas used are suited well for the application. The antennas are at a similar height to minimize possible loss of signal. I have LOS (line-of-sight) to the carriers at all times; to at least one of the antennas (I am using 802.11n). Has anyone picked up issues or found settings which can be used for comms over wifi? I can easily do this using a S7-1200 Siemens PLC and have done so using 12x S7-1200 clients and 2 AP’s with 1 base PLC. I have also successfully done this using 8xFX3U client with a System Q base PLC. My suspicion is that the delay in reading and writing to/ from the BFM in the ENET card is causing this. I am not sure that if I change to a FX5U will help. The communication cards on the Mitsubishi PLC’s seem very limited. Does anyone have any technical details on the access times between the CPU and communications cards’ BFM? Help is as always, appreciated.

  21. CP1L Unknown IP

    AndrejP posted a topic in Other Omron Software

    Hello. I have CP1L EM30 with unknown IP. I have tried to use "Direct Ethernet Connection" with "Network Browser" but with no success. I have manually set the ethernet IP4 address to 192.168.20.20 / 255.255.255.0 I've got error: "The OMRON Ethernet Direct Connection Manager service is starting in Safe Mode because Windows APIPA is enabled. (0x82020003)Omron.Cxmw.Modules.SystemLibrary.SysLibException" The PLC does NOT have default ip 192.168.250.1. What Can I do? Please help. Thanks. BR, Andrej.  
  22. Hi all, First i apologise for my english, but it's not my main language. I am very new at this world so sorry if my question is too newbie but i have been for several hours trying to get some data from an Omrom NPX1P2 DT-100 using Ethernet/IP and now i am a bit desperate. I am trying to connect this PLC using a C# Library provided by steffan rossman and it seems to be very easy,  i can manage to connect it but every try i do to request data it fails. As i can see there are several ways to get the data, for example: In this example the function GetAttributeSinglec(ClassID, instanceID, attributeID) i need the ClassID, wich i don't know what is, the instanceID, i think in my case is 100, and the attributeID wich i don't know what is or where to define. If someone could help me about how to request data it will be very appreciated. Thx in advance    
  23. My HP laptop will lose communication with Mitsubishi PLC occasionally after removing ethernet cable to download from WiFi. Our company limits the ability to use the wi-fi when I have an ethernet cord connected to my laptop, it has to do with security. If I am connected to the Mitsubishi PLC, then want to download another file from our autosave, which we connect through the wifi, I have to remove the ethernet cord from my HP laptop to enable the ability to go wireless, however sometimes when I attempt to go online with the PLC after I re-connect my ethernet cable, GX developer will not allow it. I can ping the plc and even go online with other PLCs on the network, but for some reason, the one I was connected to will not connect. I restart my computer and even re-download the file again from autosave but no joy. Its not until an unknown amount of time that it will allow me to re- connect, its as if I lose the socket connection on the plc and it needs time to reopen. I talked to our IT department and they have no ideas. Thank you in advance for any help on this matter.

  24. Digital sealing

    Risjord posted a topic in NJ Series / Sysmac Studio

    Hi, I'm trying to figure out a way to make an automatic digital sealing for a NX-controller. Functionality: Each time I do a remote connect and/or change to the program on the PLC via VPN/Tosibox I want a counter to automatically increment. This counter is the digital sealing (checked by the authorities from time to time), and is displayed on a HMI. When the sealing breaks, the new value of the counter has to be reported. I've been thinking about incrementing the counter each time the Ethernet port on the PLC registers a rising edge on online establishment. But this will not work if there is a power failure (then the counter will increment unitented), or someone by mistake unplugs and replug the Ethernet cable. Antoher idea was to ping a specified IP-address, but there seems to be no PING-functionality. I've also been thinking about using some program data (i.e. last modified), but it seems there's no system variables on the PLC that contains this kind of information. Any ideas how to solve this in the PLC? Basically I want to know if the PLC program has been changed or if there a specified IP-address has been connected to the PLC-network.

  25. How to scan Ethernet/IP network?

    crustyneon posted a topic in CX-One

    Scenario: You show up on site and the only knowns are Omron PLC and EtherNet/IP network. You have a laptop loaded with CX-One, an ethernet cable, and the ethernet port that is connected to a known EtherNet/IP Omron network (you can not see the PLC). I have previously worked with Siemens systems and used Primary Setup Tool and Proneta with wonderful results. Do similar tools exist for an Omron environment?  Question: How to (relatively quickly) scan an EtherNet/IP network for connected devices without knowing their ip addresses?