Search the Community
Showing results for tags 'kinco serial communication'.
Found 259 results
-
Hi there! I'm having some issues with a FUJI MONITOUCH V9100iSD HMI that communicates with a CJ2 PLC via Ethernet. This HMI is a migration from a previous V810iSD model. The thing is that the previous model worked correctly, but when using the new one, the HMI seems to be pretty slow when switching screens, for example. All parameters are the same, and after reading Fuji's FAQ, I've run out of ideas. Have you faced the same problem? Thanks in advance!
-
Hey! Is there any possibility to acces the PLC variables in GXWorks from another program? Like I want to read and write the I/O-s or Merkes in the Mitsubishi PLC from another program Could someone help me with this? Thank you!
-
I am working on project where I need to program delta PLC to receive ASCII code from scanner. I anyone know how to program it helpls me alot.
-
Hello All, I am college graduate student and I know little bit of cx-programmer for modifying existing program. I have master CJ2M CPU34 PLC connected with three CP1L PLC. All 4 PLC are connected via hub through Ethernet cable. I want to read/write some memory data to/from PLC through Python programming. As I am new to PLC and Python I have not much idea regarding omron PLC and python communication. So is it possible to connect python with master/slave PLCs directly? If yes then how can I communicate? I was trying with cpppo library to connect with PLC but I could not connect it. I have attached the master PLC communication setup for the reference. Any kind of lead/help is appreciated. Thank you in advance. -Yash
-
Dear Anyone. Anyone can help me. How to communication two plc Q SERIES MITSUBISHI.With QJ71E71 100.It Can Read/write .Can Show me. example instruction command ladder.or parameter CPU 1.D0 to d300. CPU 2 D400 to D700. Two Plc can Communication read / write data register. Thanks you for your attention.
-
HELP WITH ETHERNET COMMUNICATION LOGO8 SIEMENS AND KINCO HMI
Rodrigo Balsalobre posted a topic in Siemens
Hello! I was trying to communicate my siemens logo with an kinco hmi but this error are appearing on the hmi, what am I doing wrong? Im using an ethernet hub! ETHERNET SETTING ON THE HMI THE PUSH BUTTON THAT ACTIVATES M1 THE LAMP THAT'S REPRESENT "Q4" AND THAT I DON'T KNOW HOW ITS WORKS BUT I JUST PUT ON THE SCREEN TO THE PROGRAM ON LOGO SOFTCOMFORT I JUST SET THE LOGO AS SLAVE WITH THE HMI IP THE LOGO IP AND THE ERROR MESSAGE -
Hi there, I am fairly new to programming serial communications, especially with Mitsubishi PLCs. Can someone walk me through in ladder logic how to bring in ASCII to the PLC, store the data in the data registers. Then send the data out to another PC once an 'X' input is satisfied? ASCII code would go like the following: C2,0,1,123,2,ABC,3,456,CR
-
Hi, I have the following configuration where 4 PLC panels, with each having a Q12PH CPU and QJ71E71-100 module. All these QJ71E71-100 are connected to a HUB using straight cable. From the HUB one connection is going to an I-Fix SCADA which is already communicating with all 4 PLCs using MC protocol. I want to send data from 3 of this PLCs to the 4th PLC in the same network using fixed buffer communication. Can anyone provide a sample program for the same. Send and Receive side. I am using GX Works 2 for programming. Your help is very much appreciated.
-
M221 PLC with Kinco GL070E HMI
Engelis posted a topic in Modicon / Telemecanique / Schneider Electric
Hey! Whats up guys ;) I'm a student and I have been saving up money for PLC for quite a while now, I was recommended to use Schneider M221 TM221CE24R PLC. after buying it I looked online for some HMI and due to high price tag I ended up buying cheaper Kinco GL070E HMi for learning :D I'm trying to connect them both together using Ethernet cable but I'm having difficulties making them connected. The lights shows up ( blinking green ) and ( solid yellow ), I have tried Modbus TCP Slave, Schneider Ethernet (TCP Slave), M series, M200 Ethernet ( TCP Slave ), but nothing seems to be working :D The best I got in 3 weeks of trail and error and countless non-english videos on youtube :D is error message on the HMI -> [2] PLC NO RESPONSE 0-01-03 I'm trying to learn and seems like I have hit a wall. Can anyone help me to see if it is even possible to connect them or do I need to save up for new HMI :( Any help would be greatly appreciated, sincerely Engelis :) -
Hi there. Recently I've experienced problems when connecting to a S7-300 PLC via MPI/PROFIBUS. I use a PG with CP5711 processor. The thing is that I'm able to connect when I plug the 6ES7901-0BF00-0AA0 cable (male to male) directly to the PLC connector, but when I try to do connect to a PLC that has any device connected to the DP port (let´s say an inverter or HMI) I get 33:17075 error. PG/PC Interface it's correct, in fact another PG with the same configuration is able to connect through the already connected DP device's cable. Station number and transmission rate is all correct. So I tried the Simatic NET Diagnostics Test and I got error 0x0313 and since the mentioned parameters are correct I refered to this link: How do Diagnostics and Remedy work in STEP 7 when an online connection with the CP... - ID: 11492532 - Industry Support Siemens Where they say the following: I've searched for this readme file but can't find it, and there are no useful results when looking for it on internet. Why am I able to connect directly to the PLC but not when another device is connected and I have to use the female connector of the DP connector itself? Should I try to reinstall CP5711 drivers? According to Windows, I got the last drivers for the CP. Thanks in advance and I hope you can help me!
-
Hello, Any one have idea how to read and write variable for Schneider tm221 plc with Modbus function codes 3,6,16. I attached file for power supply communicator with registers, I need to adjust power supply from 25% up to 100. Please need help. Best regards, Chyngyz Modbus OPERATING INSTRUCTIONS.pdf
-
Hi, FX-2NC-32MT PLC need to change Battery, Can you please tell me the battery model no? Which communication cable require for FX-2NC-32MT PLC upload or download program? Thanks & Regards Sohel Ahmed
-
OMRON SCU32-SCU32 - Serial port communication fluctuation
T J SHARON posted a topic in CX-Programmer
HI All, I have an issue with my SCU32 communication. Back ground Two SCU32s (top and bottom side) connected via a 1100M datacable using port1 ( 9600bps, 8-2-E, start code FF, end code FE, Tx save to d1000-d1200 , Rx save to d2000-d2200). PORT2 of bottom SCU32 is connected to a compass( 2 wire, 8-1-N, 19200 bps, serial gateway MODBUS ). Refer to photo Issue Without compass, the receiving data at top is very stable and is didn't see any fluctuation. But if is compass is connected at bottom side port2, there is a fluctuation at the top side RX data(specifically d2000-d2005 ) . I checked the data a bottom side TX (d1000-d1200) and it is stable. Only after sending the data and Receiving at Top side, then only the starting words fluctuate. I am not sure sure what is wrong, I am using logical ports for the DTXDU/DRXDU and compass. Appreciate all your feedback and suggestions. -
Micro 850- ASCII query/command and response
Arceus posted a topic in Allen Bradley / Rockwell Automation
Hello all, I am working on a project where I am communicating with a Mensor CPT6100 pressure transducer using a Micro-850 PLC. For this, I have used an AWA instruction to write some ASCII characters to the sensor. The sensor then responds to the write instruction by sending ASCII characters to the RX buffer and I used ACB and ARD instructions to read the ASCII characters. Now, I have set the ACB trigger type to 0 (msg triggered only once) and it successfully reads from the sensor. However, when I set the ACB trigger type to 1 (msg triggered multiple times), I do not get any reading in the ARD block. As a matter of fact, the ACB Q bit switches off every time the program is executed when the trigger type is set to 1. I am trying to get continuous readings from the sensor, but when the trigger type is set to 0, the program latches on to the first and only reading and it won't change. My question is, how can I change my program so that it can continuously and autonomously read from the sensor without me having to manually trigger the AWA and ACB instructions every time. I am attaching the program to this thread for your reference. ASCII_Test_Copy.ccwarc -
Dear Experts Request to let me know in case it is possible to get communication software to communicate with CompactLogixL24ER. As per my understanding Rs Logix Studio 5000 is needed , version number required is V21.000 Thanks and Regards
-
Hi there! I've been working with NB HMIs with good result. But today I loaded a project to a NB7-TW01B and it feels slow, both offline and online. Switching screens and reading/writing take around 1sec or more. It first had some bmp images created with .bmp and .png files, so I tried using vector graphics instead, but didn't get any better. I don't have another NB to try it right now so I'd like to ask you if you've been in this same situation before or what could be causing this. PLC is CP1L and communication it's via Ethernet. Both devices are actually pretty close (cable is less than 3m) and the previous HMI (Pro-face GP) felt a lot faster. Thanks in advance!
-
Dear allI have DVP14SS211R series Delta PLC Which is having 24V DC supply voltage. I am using PLC as master and My end device as slave. My slave device set device_iD=1I am using Modbus RTU protocol for Function code1baud rate =9600parity =noneStop bit=1data length=8I would like to know how to send request with Function code 1(Read coil Register). i have attached code reference. Communication block it wont give error it shows 0 .means No error
-
Hey Everyone, My company decided to purchase a piece of equipment from China, and I have the pleasure of updating its terrible existing controls. We were given the PLC program by the manufacturer, so I was able to make my changes pretty easily - or at least that would be the case if I could actually connect to the dang thing. The source program is indeed openable and editable via GX developer (the original configuration shows it as an FX3). I figured connecting should be straightforward, but I was wrong. I initially used a serial/usb converter that I've used on some older Allen Bradley equipment (which worked fine for that). However, after no luck using it on the "Mitsubishi", I purchased a different cable that I found recommended on this forum (Tripp Lite USA-19HS - https://www.alliedelec.com/product/tripp-lite/usa-19hs/70101537/?gclid=Cj0KCQiAj9iBBhCJARIsAE9qRtB_n8TVAnJdFyYokoEu42W6H6LaT4kVsgJQI1qvPUsUF3rFviKpbt0aApLHEALw_wcB&gclsrc=aw.ds). Still, no luck. I've tried 7E1 and every baud rate possible, as well as some other bit/parity configurations (and yes, I've verified that I'm using the right com port, as well as tried moving the converter to different ports and trying those). Nothing seems to go through. I have almost no experience with Mitsubishi beyond a couple of FX5s (which have worked fine, but I connect to those via ethernet). Any help would be greatly appreciated; if I can't make these changes, I'm going to end up rebuilding the whole cabinet with a PLC I can rely on. Thanks in advance.
-
Hi, I have an Omron NSJ5-SQ00B-M3D Programmable Terminal (HMI) that I am trying to get to communicate with an Omron CJ2H PLC through a DeviceNet module (DRM21) in the main PLC rack. I don't see how to configure CX-Designer to communicate via DeviceNet. How is this done? Many thanks for any help.
-
Hello, We have a FX3G connected to a FX3U-ENET-ADP inside a main cabinet. We are then using that master PLC to collect data from 2 other fx3g plcs in a node:node serial network. I was assigned a small project of pricing out some wireless adapters so we can upload/download to the two slave plcs. My question is, is it possible to upload/download programs to/from the slave plcs through the ENET adapter and serial network in the main plc? It would save us some money if possible. thanks.
-
Dear Sir, Good day. I facing difficulty on using proface to print out the data using serial printer. I did follow all the instruction on proface reference manual but still fail to print out anything. Anyone here having experience on this issue? Thanks.
-
Hi all, I have finished installing ethernet adapter module FX3U-ENET-ADP on the FX3U-48M PLC. From the ethernet module, i connected it to a wireless router and then i am planning of connecting to the ethernet module using GXWorks 2 on my laptop through wireless router. On the ethernet module, the error indicator LED is on (red). From the FX3U-ENET-ADP, it means that there might be setting or hardware errors. I am asking if i have missed some steps on the installation process and if any of you have experience with similar problems. Thanks in advance for the answers.
-
I have an omron PLC (CJ1M type) at home which I would like to connect to, however, lately, I can't anymore. I'm trying on two different PC's a newer and an older one, both running on windows 10. 1 is just mentioning a DLL error and I can't even start cx-programmer, the other one seems to work, however, when I try to go online it always fails I'm using a usb to serial device and after some searching on the net, I thought the issue was with the prolific driver. I tried all kind of fixes, but nothing seemed to work. I have now purchased another device, the XS8801 from usconverters and installed the latest driver. I have checked if cx programmer is set to work with the correct port and this is the case. My knowledge is very limited but I would really want to connect to that PLC again, so hoping someone out here is able to help me. Thanks a lot
-
Hi all, I want to ask some questions regarding Ethernet Communication with FX3U PLC series. I have 2 PLCs of FX3U series (FX3U-48M and FX3U-64M) and I want to monitor its data (input and output) using ethernet communication in real time. My questions are: 1. Does FX3U PLC have ethernet port so I can connect it directly to my Laptop/PC? 2. If no, do I need to use FX3U-ENET-ADP and can it be used for 2 PLC or only 1? 3. What software do I need to use to configure the communication between PLC and FX3U-ENET-ADP? 4. Does this configuration change the existing PLC program? 5. Can i transmit the data wireless-ly using some kind of ethernet to wifi adapter and what additional hardware do i need for that?
-
Hello, I am building an application in CitectSCADA and I want to communicate with an Omron Sysmac CS1G. The connection between the plc and the Citect computer is through an ethernet to serial adapter (the computer doesn't have com ports on board). I'm having some difficulty establishing the communication and I want to make sure that I can actually reach the plc. Is there a way to check that the computer can reach the plc over the serial connection without using CX programmer? Maybe using Hyper Terminal, Putty or something similar. Thank you, Liron