Search the Community

Hello please could you help me with this problem . I have FX2N-16MT CPU with expansion modules FX2n-16ex-es , FX2n-16ey-es in that order . when i download the program on it and moniter online  i have active output on y22 ,y25, y13, y00, y27 (software) , i only found led of y00 (CPU module) ON , others of expansion op module not  (P.s power lamp on module on ) , however the expansion of ip doing well , .  i do that trails . 1-change combination to be FX2N-16MT CPU - FX2n-16ex-es -  FX2n 16eyr (new one) , but same happen  , when i go to plc diagnostics i found error 1010 i/0 hardware configuration  2-   FX2N-16MT CPU -   FX2n 16eyr (new one) , but same happen 3- FX2n- 14mt CPU (New one ) - FX2n 16eyr (new one) with same program it works ok  .  i wondering how melsoft software recognize expansion module of FX2N series and if it need hardware configurations (by rack like siemens plc ) the way of addressing ip and op in mitsubishi plc FX2n series . how to change it . and if i wanna to change the cpu 16mt , by 14mt ., does i need to change spacial markes or function on the machine program . . i m sry for my bad english and thanks in advance     

hello...... i use of C200HS-CN220-EU Program Download Cable for downloading program to plc. i can work online but when transfer to plc error is check dip switch.... i read manual and dip switch table but cant set dip switch..... please help me to setting dip-switchs for C200HS-CN220-EU Program Download Cable...

How to resolve my plc is stop working after download program from H1U-XP with autoshop v2. It show download plc program process but i don't have any program in ladder chart. Pls help...

Halo, i have question and asking for help. my factory use mitsubishi plc type fx5u. can anyone help me how to setting everything that make motor servo can run. PLC : FX5U Ampli Servo : MR-J4-70A Thank you for helping me.

Hello, I have a question concerning the verified program. I do not know if the program is verified or not. I can not upload pic. I have 8 programs Verify result MATCH and one green line Data (Verify destination):NOT TO USE Verify result: Dest. Only. The green line is confusing me. I ask for an explanation. Please. Greetings to all

I have a problem when trying to download a program from a FX1S-30MT PLC. I am using a SC-09 USB cable. The software i am using is GX Developer 8. When trying to download the MAIN program the screen in the attachment appears. I tested the download from another PLC of same model and have no problems, therefore the cable is ok, and the laptop is ok. When downloading of the parameters and comments does not give error, just when trying to download MAIN. Also I tested connection with Test Connection button and says communication is ok. Anyone who can help? I have a doubt, how can i see the communication parameters on the PLC side? Thanks a lot

Hello, First of all, Hello to all members. Im From Portugal. I trying to help my dad. I Have a Omron CJ1M-CPU11 with a program running that works fine... Now i need to transfer this program to a CJ1M-CPU13. I started to download from CJ1M-CPU11 to a file... them im running the Cx-programer on the CJ1M-CPU13, connection its ok, but when i try to transfer i get this error : The connect PLC type : CJ1M-CPU11 The Project PLC type : CJ1M-CPU13 Its possible to convert ? Please Help. Please view in attached file. Thanks

Hello: I'm not sure how to go about creating the structure of this program, would like some ideas/help. I have a program that checks/reads 8 analog inputs and compares each input against 4 different settings, if the value is outside any of these settings the program runs a subroutine to send out an email for (Alarm/Event) notification for that particular input. The way the program is structured now is that it reads analog input 0 first and checks against the settings if the reading is not in range it will call a subroutine to send out email for that sensor(analog AI:0.0) then it will return and read for Analog input #1 and check reading and if it needs to it will call another subroutine to send out email for that sensor(analog AI:0.1) and so forth. What I need to add, is a way to count how many times a sensor(input) has sent the alarm email because I want to limit this to 5 notifications after that, stop sending emails. Now this has to be done for each sensor(input).(Note: I would also like to have a timer involved so that it will only send emails about every 15 minutes for 5 counts.) I need this because the plc will send out emails until the error for the sensor has been corrected, this could take a few hours and if I don't have some sort of control, that would result in 1000's of emails being sent and world probably get shut down for spamming. Would like some ideas on how I should go about this. I am using a micrologix 1100 and rslogix 500 software. Thanks

Do I need to write the "Program Loop" into the ladder or will the complete program start over once it has hit the "END RUNG"??? Micrologix 1100, programming with the RSLogix500. Thanks

Hi all, I hope one of you kind people could help me: I have an Omron CPM1A CPU where the outputs are damaged. I have a new blank CPU and I would like to transfer the program, however, the UM is read-protected. The backup tool doesn't seem to cater for the CPM1A. Is there any other way the program could be transferred? The customer does not have the program or the password. I do not believe that I am interfering with any intellectual rights here because the OEM are long since departed and all I want to do is transfer the program, not modify it. Many thanks in advance. JG.

I am writing a new program for a MicroLogix 1500 LRP Series C. When I verify the project I get the following errors: Program error ERROR: Attempted to set more IO data than has been allocated Program error ERROR: Incorrect Output Force File Size The IO Configuration should be correct because I had the software "Read IO Config". I don't see any unverified rungs. My software is RSLogix 500 Version 9.00.00 (CPR 9) Does anyone have a solution?

sir, i don`t know how to configure Fx2n-4AD AND Fx2n-4AD-PT module with PLC fx1n-60mr please tell me complete detail of program write in GX develpr..if possible...attach picture of program

Hello Everyone, I am new to ladder logic, and trying to understand flow of below attached ladder logic- How does the program flow ? Does PT4601_I in rung 3 waits for rung 2 to complete inorder to consider updated value of PT4601_I or it consider PT4601_I default value and runs simultaneously with rung 2 ? Thank you in advacne

I have very little experience with Mitsubishi logic and I need to modify an existing program from 1999. I am looking for some insight on how to approach this request. The required change has to have Y035 energize 2x during one scan of the program. (Double stroke the cyclinder) FX2n PLC Y035 connected to a spring return solenoid GX Developer 8.20W (Originally coded with Melsec Medoc 16bit) M855 M630 -------| |------------------------------------------------| |-------------------------------------------------------------------------------------(M857 ) MAN MECH | PWR ON EXT MECH TEST | CYL | | | M645 M860 M760 | ------| |------------|/|------------| |-------------| CYC OK INDX2 OK INDX1 START RET M857 M858 M859 M630 ------| |------------|/|------------|/|-------------| |-------------------------------------------------------------------------------------------(Y035 ) EXT MECH TST OK TST FAIL PWR ON MECH CYL CYL RET RET EXT I can upload source code if anyone is interested. Any suggestions would be greatly appreciated!

Hi, I have a program for FX2N-48mr written in GX Works (gxw). I'd like to convert the software to CodeSys. If possible, can anyone send me the best procedure for it? Thanks. Oren

Dear all, I need some help with programming time in concept 2.6 in FBD. I use momentum PLC 171 CCC 980 30-IEC I would like to program 24Hours Clock with day, week and year. Can someone help me with this please. Regards Sam

I have encountered memory backup battery failure/fully drained in MITSUBISHI A2SH PLC.So RUN LED started flashing on PLC. Thus no field parameters values were being shown on HMI. I connected PC with PLC through serial RS232 cable using GX DEVELOPER 8 , the connection test was successful. Then I tried to download my project saved on PC to PLC, then I was amazed as It asked for a keyword. However when the backup battery was working , I downloaded the same project but it did not ask for any keyword. Can anyone explain this. Now the real problem is that the program was developed by somebody long ago , to whom I don't have any contact right now and I m helpless as I don't know the keyword and can not download the program and thus my machine is at halt. I tried to clear the user memory from online menu , but it says the function not supported. I m stuck and frustrated . Anybody 's help is greatly appraised in anticipation. Of course I m not asking for hacking a keyword. Just to know how can I make my system functional. Thanks everybody.

I currently have a NT21HMI that does not have the system software loaded. I do not have any system programs with the *.21 extension. Where can I find the NT21 system software?

Hi Im new here! Please let me know What cable do you use to program a M340 ? -1- a mini USB ? -2- Ethernet ? -3-RS485? any one can give me a sample test program to test M340? just a dummy simple program to start from there. I appreciate it in advance.