Search the Community

Showing results for tags 'ipad scada'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 140 results

  1. Hello Guys, Im trying to stream camera in indusoft thorigh vlc plugin (Activex), I want to use RTSP to stream, we have the URL rdy, but dont know where to insert Someone tried this before, rly need assitance. THANKS!!!
  2. Here is my setup - Factorytalk view SE V 7.0 with Primary and secondary servers. System gets replicated from primary to secondary once in a week. After the primary server was restarted due to some issue, all the HMI tags lost their values. 'Retentive' checkbox was checked on all HMI tags, initial value field is blank. According to the description of 'Retentive' field in the help file, the HMI tag should hold its value even after the server is restarted if the box is checked. Also, secondary server should have held those same values while primary was rebooting, but as of now all my HMI tags field are blanks. Am I looking at a patch roll up here?
  3. Hello, I am new to Scada Programming. I am using Citect scada V7.50. I have completed whole project, but I am unable to generate Excel report for Alarms generated during run time. Please help me for this issue. Thanks...
  4. Do you have a known ac repair expert in contacts who can help me fix the issue i am having with my air conditioning unit?
  5. Datamap Tests

    Hi All, Bit of a noob here. I started a new project where the client is upgrading their SCADA system, and as such every discrete needs to be toggled, and every analog range needs to be tested. I've created an excel database with every register, however, changing the value in the tag is too manual for me and I'm trying to find a way to increase the automation. I am looking for a solution where I can write directly with the tags instead of fumbling through the horror which is Proficy. I've seen some mentions of using the trial version of Ignition but I am struggling to get that to a useable state.    Any ideas greatly appreciated.
  6. Mitsubishi PLC with Fernhill SCADA

    Hi, Has anyone here has experience of using Fernhill SCADA with Mitsubishi PLC FX3U Series? I want to monitor PLC's data in real time through FX3U-ENET-ADP ethernet adapter using Fernhill SCADA software. Thanks in advance for the answer.
  7. Hello, I am trying to have single press and double press etc. functionality in my PLC program where for example, single press will turn on the motor whereas double press will turn on the motor for 5 seconds. Is it possible to achieve using ladder logic in sysmac studio, if yes, how? Thank you in advance.
  8. I am pretty new to the SCADA world. I wanted to know what are the advantages of using a paid proprietary SCADA software such as WinCC, Wonderware, cimplicity over free software such as OpenSCADA, OpenAPI, IndigoSCADA and so on. I have read, there are more layers of security in the paid one. What does that mean? What are the other main differences between the paid and free ones out there in the market?
  9. Hi All, Hope you all doing well in this pandemic life.  I would need your expertise with an issue I have been struggling with for past few days and thought to reach out here. I am working on a migration project with GE PLC and Citect SCADA 7.10. The GE PLC is migrated to ControlLogix L74 Rev24.10 while Citect SCADA is retained. For testing I only have L71 and L82 and could not managed to organise L74. When the code the loaded in L71 and connected to Citect, I cannot see tags in Graphic page but I see the subscription.txt in Debug folder shows all tags good . The same code when loaded in L82, the Citect works instantly.  Does anyone know this behaviour of PLC and SCADA? Regards, DeeEngr    
  10. Hello Guys, I am very new to CIP messaging and in our project, we are trying to Controllogix to SCADA server using CIP messaging: What I understand from the process right now is : 1. SCADA Opens a connection for Large forward Open ( Connection size set at 2500 bytes) 2. PLC responds and establishes a connection 3. SCADA send an MSP request to access tags from PLC 4. PLC responds to this request The problem we are facing is the PLC doesn't send out a response of more than 240 bytes, Have any of you guys have faced a similar issue or can help me with troubleshooting?   Thanks in advance Attached screen captures from wire           
  11. Analysing SCADA systems

    Hey guys, I'm currently working on a project to analyze available SCADA systems and make a systematic comparison of some of these selected options. In today's markets, there's a constant rise in demand for Industry 4.0 applications in the production process, connectivity, and data acquisition. What are some other important technical factors that need to be considered in order to compare these systems?
  12. Network Dropouts at Night!

    We have been having a re-occurring issue where some of our PLC's throughout our plant have a network outage that occurs around the same time every night. The PLC's are disbursed among the plant and it has been confirmed no large pieces of equipment are being turned on around this time every night... The network traffic does not fluctuate around this time and is not near a "troubling" level. There was a reboot to one of our servers on the same VLAN as the PLC's that are having the connectivity issues... What could have changed from a server reboot to remedy this issue, the server is not communicating to the PLC's, they are just on the same VLAN. 
  13. Wonderware DASMTEthernet Driver

    I have a client who is duplicating an existing Wonderware SCADA/MELSEC Q Series with a Wonderware 2014 R2 configuration, which they want to maintain that version.  The driver they use is the DASMTEthernet, which is no longer available from Wonderware.  I'm looking for any lead I can find to get hold of this driver, or a good solution to resolve the communications.
  14. LOGO! 8 TIA portal WinCC

    Hi all experts, I am LOGO! 8 PLC programmer, and now I am beginning to start SCADA developement. I want to ask which software should I install ?, 1. TIA portal with Siemens SIMATIC STEP 7 Professional & WinCC Professional 15.1 x64 2. WinCC RT Professional 15.1 x64 3. STEP 7 Professional 14.0 4. SINAMICS Startdrive 14.0 5. WinCC RT Advanced v15 Please excuse me if my question is not OK as I am beginning scada developement I know nothing about it and I can get limited software through my college programme. I am confused too because I found that "Up from version 12 of WinCC the driver “LOGO” is available" and also "I think the Logo! communication driver is only available for a WinCC RT advanced , not professional."  in this post : unable-to-connect-tia-15-version-to-logo-8/185145 Please hep me so that I can learn SCADA developement with my LOGO8 Waiting for your fruitful reply, Thanks and Regards
  15. Optimized Blocks

    Hello everyone, Are there any alternatives to WinCC at the moment that can handle using optimized blocks. In most other SCADA software, while importing tags, the option to optimize blocks should not be selected as they cannot import in this format. Ignition by Inductive Automation has a driver that can be purchased to solve this problem. I wanted to know if there are some other solutions to this issue.  Thanks!
  16. I have developed Vijeo Citect 7.5 in last 15 Days before at a Plant. During last 15 days scada went good and healthy, But suddenly its pop up window getting stuck after every 10-12hrs. So it is not possible to start/stop motor, drive. when press window button from keyboard then it becomes healthy again.  I am unable to reach at any solution for this problem. Please help me. 
  17. There have been many good discussions on the applicability of cloud-based solutions for manufacturing and process control systems. On one side, some people have concerns regarding security and control of the information, on the other side, there are identified benefits enabled by cloud systems. From VMS minicomputers to DOS and Windows, from ArcNet to Ethernet, it is inevitable the industrial automation systems shall adopt the technologies that are getting predominant in IT general use; the current environment that I am calling the “Cloud-iPad era” is no different; therefore the practical discussion is not if those new technologies will be applied in the industrial environment, but how. This paper is not intended to join the conceptual discussion about the cloud, but just to present a few simple practical examples, where cloud technologies are already enhancing industrial automation solutions and enabling new business opportunities. CloudPracticalApplications.pdf
  18. I am using PLC Modicon M221, I want to make communication between PLC Modicon M221 to OPC Kepware by modbus tcp/ip ethernet. In PLC, I use software somachine basic, I set digital input and digital output. And in OPC Kepware my address  00001, but when I switch turn On/Off in PLC, value in OPC Kepware doesnt change. Could you please correct me? Thank you   Bujang
  19. Hello! I am beginner in PLC world, also in SIEMENS PLCs. I managed communication over private network. Now I have a problem that I get same values on all inputs. Picture below shows my configuration of driver and data monitor. First picture shows values when input I0.0 is in state 0. Second picture shows values when input I0.0 is in state 1. Physically on PLC only input I0.0 is forced to 1, input I0.1 stays 0. But data monitor shows both inputs as state 1. Where is problem? Is problem in PLC program, TIA portal? I saw some guys using DataBlocks but I am not skilled enough to use it. Third picture shows simple PLC program on my PLC. Please help. Thanks in advance!
  20. Hello! I am trying to connect my PLC with SCADA. I am using S7-1200 1212C CPU (RELAY outputs). My SCADA system is iFIX 5.8 with driver S7A. I am trying to establish connection via GPRS router (TCP/IP). Port being used is 102 (default by S7A driver). In my company we have private network, SIM card in GPRS router gets static IP (set by RADIUS server)  which is 10.247.XXX.XXX. My PLC has IP 192.168.0.10 set in Project. I am not sure what am I doing wrong. How to correctly set IP address in PLC to communicate in private network via GPRS router with static IP? I already enabled TCP port 102 in my router but I am not sure to which IP should I enable it because I am not sure if IP address set in PLC is correct. Should I use some communication blocks in program? I also enabled PUT/GET function (see attached pictures). Please help. Thanks in advance! :)  
  21.   Haiwell large-screen controller TV BOX can realize the large-screen display of HMI images in the LAN. User can select, switch and view multiple touch screen images on the TV screen, and realize the function of large traditional electronic display board in the most cost-effective way. Through TVBOX, different sizes of touch screen images can be displayed on the TV screen. The scada, curve, formula, user rights and other functions on the HMI can be displayed on the large screen.Users can use remote controller or mouse by USB interface of TVBOX to realize the remote operation and monitoring of the HMI.   One TVBOX, one TV, and multiple HMIs can easily realize the function of big electronic display board, which is widely used in agricultural greenhouses, aquaculture, libraries, production workshops and other large screen data monitoring and display applications. Remote management : Supports display, access, and remote control of HMI within the LAN.     There are so many industrial automation suppliers, it is really a headache issue to pick right partner to work with. Haiwell partners are applied Haiwell solutions in smart factory. Now we are looking for global distributors. So it is time to make up your final decision. To win or lose, your choice. If you are ready, check bellow details and contact us: http://en.haiwell.com
  22. There are so many industrial automation suppliers, it is really a headache issue to pick right partner to work with. Haiwell partners are applied Haiwell solutions in smart factory. Now we are looking for global distributors. So it is time to make up your final decision. To win or lose, your choice. If you are ready, check bellow details and contact us: What Haiwell do, not only PLC, not only HMI, or even SCADA. We are helping our partners to grab the future.   My Wechat/Whatsapp: 0086 15880530763 Email: osgood@haiwell.com Company website: en.haiwell.com  
  23. Hello. I'm trying to connect to Microsoft SQL Server (2008 EXPRESS), but the connection is not working. I have done this in Citect SCADA 2018 without any problems using connection string: hSQL = SQLConnect("SCADA Data Provider=SQLClient.....) How can I connect to MS SQL Server using Citect 6.1? Thanks. Best regards.
  24. Hi, I have a a few substations and I´d like to have a local SCADA in each of them. What is the best scada to use with reasonable price? Does anyone know if there is a solution without the need to have a PC for each substation? Thanx
  25. Honeywell Experion SCADA

    I haven't used Experion before, nor do I have a licence or access to a download of the application. As such I want to know how limited an unlicensed version of the product is. Is it like Citect where you may develop graphics but need a license for runtime, or is it like FTView where you need a license just to open the application? Thanks in advance