Search the Community

Showing results for tags 'indusoft web studio'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 175 results

  1. I want  increase the length of string from 82 to 150. By default it comes 82 is it possible to do so in Studio 5000
  2. Good morning I have a problem with communication with a Yaskawa inverter, specifically GA500. The device communicates via the EtherCat network. Communication works, but when I want to change my PDO, I have a problem as shown in the screenshot in attachment. The problem occurs when I add the "Operation Command" variable. I have no idea what the problem is. I did not find a library on the Omron website that could support this inverter. thank you in advance for your help.  
  3. Hi All, I need access to a the Safety function blocks within a safety CPU using sysmac studio on a machine we are upgrading.. Is there a generic password available to gain access? Best Regards, Paul  
  4. MOVE data

    Hello,   Seeking for assistance on how to program the below conditions, If I wanted to see the history of the total numbers per hour, like it will be displayed in my HMI Events Screen. How will I do it? Attached image is the one I am trying to work on, but still not working. Do you have any other suggestions what to use in the program for me to be able to display the logs per hour? Thank you for any help you may give.
  5. Hi, I'm working on a projects where i need the button text to be dynamic.(assigned by a string variable) i have not been able to figure out how to accomplish this easily. I made a workaround with placing a label over the button and have the label refer to a string, but it would be soo much easier and smoother to just have the button text assigned a variable. I would think i could access the the text field through code ,like: Btn_1.Text=My_Btn_String_1, but have had no luck with this. Would Greatly appreciate any help. Thanks, Frank.  
  6. In the last update of Sysmac Studio (1.55) I would like to turn off the feature, see image. Can you help me?
  7. Hi All, I'm looking to setup communications between a digital force gauge and an Omron NX-CIF1010 RS232 serial communication interface.  Here is the Output Protocol from the Force Gauges Manual: Output Protocol RS-232 Parameter - Baudrate: 9600 - Data-Bit: 8 - Parity: none - Stop-bit: 1 The measured value is requested by the PC by the ASCII Sign “9”. I've tried to follow the youtube video, "How to communicate via RS 232 using an NX CIF to a PC" however setting up communication between the force gauge instead of a PC is proving difficult. How to communicate via RS 232 using an NX CIF to a PC - YouTube This is quite new to me so I'm trying to get my head around it at the moment so please correct me if I'm wrong. I'm reading values from the Force gauge in ASCII and I need to convert those values into another numerical value data type. I've seen in CX-Programmer, ASCII values being converted into Floating Point values using the "FVAL" instruction using Data registers however I can't use the same approach in Sysmac Studio. Do I need to clear the serial buffer everytime before I look to receive a numerical value from the force gauge? Here are details regarding the screenshots I've included below: 1) CIF101 Parameters to read Force Gauge Output Protcol in Sysmac Studio which should be matching the force gauges output protocol. 2) CIF101 IO Map in Sysmac Studio - ** I'm unsure if this is where I need to be linking the "RcvDat" input of the "NX_SerialRcv" function block? 3) CIF101 Sending Data Function Block - "NX_SerialBufClear" function block setup - "port_id" data type has been changed to "_sDevice_Port". 4) CIF101 Receiving Data Function Block - "NX_SerialRcv" function block setup 5) Global Variable - Array [0..3] OF BYTE - used in "RcvDat" input of "NX_SerialRcv" function block  6) Internal Variables Created  to send and receive data 7) Force Gauge RS232 Configuration 8) Force Gauge Output Protocol   Any help would be greatly appreciated. Paul  
  8. Hello everyone, I'm facing an issue while trying to go online with a PLC. The firmware revision of the controller is 34.011, but the offline project I have is showing a firmware revision of 33.xx. Due to this mismatch, I'm unable to establish a connection. I'm relatively new to this company and recently learned that the program on my computer may have been modified by a contractor company, which might explain the version difference. I suspect they may have used a higher version of RsLogix when making the changes. I'm looking for guidance on how to proceed in this situation. Is there a way to update the offline project's firmware revision to match the controller's firmware revision? Or is there another solution to resolve this compatibility issue? Any help or insights would be greatly appreciated. Thank you!
  9. I recently had surgery on my arm. I'm in a cast from finger tips to shoulder.  I have a major Logix 5000 program to write. Has anyone used Win10 Speech Recognition to operate Studio 5000? I tried today and it didn't work out well! Any suggestions?
  10. Hello, has anyone had success in creating a wedge with borders that change due to its assigned tags? Attempting to create a range on a gauge using wedge, but am unsure how to approach this considering it wouldn't be rotating the wedge around a point but rather changing the size of the wedge. 
  11. Hi everyone! I am attempting to read EIP tags from an Allen-Bradley ControlLogix from an Omron NX1P2 using the Sysmac Studio function block "CIPUCMMRead." I have been successful in reading arrays and single variables no problem. However, when I want to read arrays from a structure in the Allen-Bradley PLC, I always get an error code in the CIPUCMMRead ErrorID of either 0400 or 1C00 for ErrorID and ErrorIDEx is FF00 2105 depending on what I enter in for Size on the function block (attaching screenshots with both error codes).   The errors show on multiple "read" function blocks at once but it only affects data coming out of the function block where I try to read in a BOOL array from a structure in the ControlLogix PLC. If I enter a UINT#1 for the Size, I get ErrorID 0400. If I enter UINT#2, 3, or 4, I get ErrorID 1C00 with ErrorIDEx being FF00 2105. I've been digging for a while and can't find that specific combo of codes, but it looks like it's a size issue. From what I can tell, the Size is in Bytes. So if I have 32 Bools it should be a Size of UINT#4 max, right? Any help would be greatly appreciated! The function block having issues is setup the exact same as the other two that read from the same structure; I even copied and pasted them from each other and just changed the FB name and the postfix in the SrcDat string (from MyBools to MyDints/MyReals). Here are the screenshot: 1. Allen-Bradley Structure 2. CIPUCMMRead Function Block with size 4 3. CIPUCMMRead Function Block with size 1
  12. Hello,   I'm seeking some guidance and assistance regarding an issue I've encountered while configuring a Proline Promag W 400 flow meter module in Logix Designer. I'm experiencing the following error:   Error Code: 16#0009 Fault Additional Code: 16#0000 Fault Description: Module Configuration Rejected: Parameter Error   I've carefully reviewed the module documentation, verified the wiring connections, and ensured compatibility between the flow meter module (Serial Number: T711F49000) and Studio 5000 Logix Designer (Version 33.00.00 Full Edition). However, I'm still facing this parameter error during the configuration process.   I've also attempted to access the web service provided by the flow meter module to view its configuration and parameter settings, but I haven't been able to identify the specific cause of the error.   I would greatly appreciate any insights or suggestions from the forum members who might have encountered a similar issue or have expertise with the Proline Promag W 400 flow meter module and Logix Designer. Specifically, I'm interested in any troubleshooting steps or guidance that could help resolve the parameter error and successfully configure the module.   https://files.fm/u/brm2ebkry
  13. Hi everyone,  I recently started in the automation industry and am currently working on an Omron project.    So I have two programs, one on Sysmac Studio (which has the HMI) and the other on CX-Programmer. I am trying to simulate both simultaneously using the Sysmac Studio HMI. Is there any way I can do that where for example I can toggle stuff on and off from the Sysmac HMI and get feedback from the CX-Programmer ladder?    Thank you in advance. 
  14. Hi there! This is my first time using Rockwell automation software and I have some questions I can't answer. When I'm running the FactoryTalk runtime application with a simulated controller, I get disconnected from Logix Designer, so I can't online watch the program. If I try to simulate using 'Test Application' in FactoryTalk View Studio, it appears to communicate, but buttons don't make any effect when pressed.   Hope you can throw some light on it! Thanks in advance!  
  15. I have 2 vm’s, 1 with FactoryTalk and 1 with Studio 5000 and Studio 5000 emulate and I need the Factorytalk to communicate with the emulated plc on another vm and wondered if this is possible.
  16. Hello, I am working on a project currently that uses a windows application on a PC to communicate with an NX1P2 controller to read and write variables data. I found a course on Udemy which has a Visual Studio project with OMRON DLLs that are used for these communications. I confirmed with OMRON that they do have official DLLs for this, but the technical support guy has told me he is trying to find them himself.   I have attached a screenshot of the DLL references.  I am really looking for the DLL libraries, aswell as the documentation on their functionality to I can use them to communicate. Any help would be greatly appreciated!  
  17. Hi, I'm Jovel, I'm new to learning how to program PLC. Just want to learn how to use Omron Sysmac Studio . I have a question about the Data Type Data Type - Structure ( Offset Type - Offset Byte )  / Union   I Don't Understand this 2 Data types and how going to use them, can anyone teach me and have a sample program? Thank you
  18. Hi, currently I'm facing a problem between  NB10W-TW01B and NX102-1200 PLC. The problem is after I assign the area/variable using W/H/D and Download it to HMI, The HMI will Pop up PLC Response Error, anyone knows how to fix it ?? I have experience using NB HMI with NX1P2 and NJ PLC, didn't have this error before  
  19.   Replacing dead powerflex 700 with 753 talking via ethernet. Any good instructions on how to update the file from 700 to 753 on rslogix 5000?                                    
  20. Is there any one-shot instruction in sysmac studio? I am running a simulator to test the program but I can not work with LD and LDN instructions.
  21. I have a new PC that is running Windows 10, I have RSLogix 500 loaded and working no problem, along with RSLinx, Factory Talk Activation... etc. I also loaded the Studio 5000 package and it loaded without a problem however will not run. It starts and allows you to pick a project to work on, then will display the Logix 5000 splash window for a second, then just close. No error message, crash or idea of what it is doing, just closes. So far no help from AB, perhaps someone here is running this on Windows 10 or has an idea how to figure out why it is closing. Thanks
  22. I am trying to display the time from an Accumulation timer. Using a data display object I am able to see the time in the following format 00:00:00.0000000. Is there a way to format the time without the decimal seconds I just want to see 00:00:00 (hours:minutes:seconds)
  23. Hi, Does anybody know if its possible to access the "Inhibit Module" tick box within the Hardware Device Connection tab from the PLC code? I'm hoping to turn this on / off depending on whether certain modules of machine are physically installed.  e.g. A Kinetix Drive / Point IO etc. Thanks
  24. Does anyone know how to change the reading on Omron servo motor reading from negative to positive? The encoder is reading negative values when it is moving in the forward direction.  I am using 1S servo on NX1P2 controller on Sysmac studio software.  Please suggest. 
  25. Just added a Keyence IV3 vision sensor to my NX1P2 system and have a little issue with the Tag Set / data structure. The Input and Output assemblies imported with the .eds file are an Input assembly of 101 with 394 byte size and an Output assembly of 242 with a 12 byte size. The problem I have is that the 101 Input assy size of 394 bytes does not allow me the OK/NG status of the vision tools from 17 to 64. I need an additional 6 bytes to access these bits in my data allocation table. My question is, Is it possible to modify this Input assy  to a larger size that is acceptable to the NX1 data structure. I tried just altering the size in my Ethernet IP connections tab and creating the corresponding tags in the data structure and it resolved and transferred OK but then would not allow my IV3 sensor to go online and communicate via Ethernet IP. How can I resolve this?