Search the Community
Showing results for tags 'i have restored a crashed ifix to a new pc. the restore is ok and installed ge9 driver. with the ge9 power tools we can observed that data transmits and recieve. the problem is that the screen scada is not updating i.e. no status/feedback'.
Found 391 results
-
Hello.I'm having variable Voltage expressed as UNSIGNED DOUBLE INT.For example: Val = 23423For displaying the right value I have to divide value by 100 ... Val/100 = 234.23V.For showing the value I can set the decimal place to 2 and Unit&Scale to 1002.The problem is:THE GRAPH IS SHOWING Val=23423. I WOULD LIKE TO SHOW Val=234.23.HOW CAN I USE THE DECIMAL PLACES IN GRAPH?WHERE CAN I SET THIS SETTING?Thanks.BR, Andrej.
-
Is it possible to view the values / states of all inputs, outputs and workbits (e.g. 64.00 through 64.15 on Omron CQM1 PLC) on a single screen or control panel within CX-Programmer software? I'm trying to troubleshoot some ladder logic that I wrote and need to know the values of 5 or 6 inputs/outputs/workbits simultaneously. Having to scroll up and down through my ladder logic repeatedly does not work well with code that changes state every 5-10 seconds or so. Any help is welcome.
-
Goodmorning a question... I builded a simple monitor of plc. I need to read the data of the Mitsubishi FX3GE PLC. In example I should read: D14 FLOAT 32bit D16 FLOAT 32bit alarms from M100 to M119 and a bit of state M450 How can I do this? The PLC is connected via ethernet and the port il 5002. I'm working with PHP and normally use modbus, opc-ua, etc. But here? Thanks in advance Carlo
-
We think so we lost the program after a battery replace, because the program isn´t loaded on GOT. Is it possible restore it by the PLC?
-
Hello Everyone, Need help with reading channel data of FX2N-4AD with FX3U Cpu. I have added all the logic and it works also. Problem is that, FROM function stop reading/fetching data from FX2N-4AD after some time i.e couple of hours and value just hang. Like 502 or something, untill you reset the whole PLC. What could be the problem. For the further info, -I have connected the FX2N-4AD on the right of fX3U-64M. -There are two extension blocks FX2N-16EX and FX2N-16EYR also added to the right of FX3U-64M -Order of mounting....FX3U-64M > FX2N-16EX > FX2N-16EYR > FX2N-4AD > FX2N-4AD I have tried using the 2nd special module connected at the end, but It showed similar problem after few hours of running. THis shows that both Special blocks fx2n-4ad are okay. There is something wrong with PLC maybe? Please help
-
I have a client who is duplicating an existing Wonderware SCADA/MELSEC Q Series with a Wonderware 2014 R2 configuration, which they want to maintain that version. The driver they use is the DASMTEthernet, which is no longer available from Wonderware. I'm looking for any lead I can find to get hold of this driver, or a good solution to resolve the communications.
-
Hi all experts, I am LOGO! 8 PLC programmer, and now I am beginning to start SCADA developement. I want to ask which software should I install ?, 1. TIA portal with Siemens SIMATIC STEP 7 Professional & WinCC Professional 15.1 x64 2. WinCC RT Professional 15.1 x64 3. STEP 7 Professional 14.0 4. SINAMICS Startdrive 14.0 5. WinCC RT Advanced v15 Please excuse me if my question is not OK as I am beginning scada developement I know nothing about it and I can get limited software through my college programme. I am confused too because I found that "Up from version 12 of WinCC the driver “LOGO” is available" and also "I think the Logo! communication driver is only available for a WinCC RT advanced , not professional." in this post : unable-to-connect-tia-15-version-to-logo-8/185145 Please hep me so that I can learn SCADA developement with my LOGO8 Waiting for your fruitful reply, Thanks and Regards
-
Allen Bradley 1764-24BWA Series B
marianosanchez posted a topic in Allen Bradley / Rockwell Automation
Hi everybody. I am looking for the schematic diagram of the power supply for the Allen Bradley 1764-24BWA series B. I did extensive search on google but could not find anything useful (only user manual of replacement parts). Thanks in advance. Cheers. -
Hello everyone, i'm having difficulties in the hour to create a space like the circle of the attachments in below. 'Cause i wanna create the new frame in each buttons.
-
Hello everyone, Are there any alternatives to WinCC at the moment that can handle using optimized blocks. In most other SCADA software, while importing tags, the option to optimize blocks should not be selected as they cannot import in this format. Ignition by Inductive Automation has a driver that can be purchased to solve this problem. I wanted to know if there are some other solutions to this issue. Thanks!
-
Dear all schneider Experts, anyone having "Vijeo designer screen editor"Software for XBT012110 megelis HMI. Please give a download link, I got very stuck to get this software #Advanced Thanking you......
-
Malfunction of Pop-Ups in Vijeo Citect ver-7.5
dwihim posted a topic in Modicon / Telemecanique / Schneider Electric
I have developed Vijeo Citect 7.5 in last 15 Days before at a Plant. During last 15 days scada went good and healthy, But suddenly its pop up window getting stuck after every 10-12hrs. So it is not possible to start/stop motor, drive. when press window button from keyboard then it becomes healthy again. I am unable to reach at any solution for this problem. Please help me. -
There have been many good discussions on the applicability of cloud-based solutions for manufacturing and process control systems. On one side, some people have concerns regarding security and control of the information, on the other side, there are identified benefits enabled by cloud systems. From VMS minicomputers to DOS and Windows, from ArcNet to Ethernet, it is inevitable the industrial automation systems shall adopt the technologies that are getting predominant in IT general use; the current environment that I am calling the “Cloud-iPad era” is no different; therefore the practical discussion is not if those new technologies will be applied in the industrial environment, but how. This paper is not intended to join the conceptual discussion about the cloud, but just to present a few simple practical examples, where cloud technologies are already enhancing industrial automation solutions and enabling new business opportunities. CloudPracticalApplications.pdf -
Send data memory from PLC to other PLC with CX Programmer
Amsterdamstyle posted a topic in CX-Programmer
Hello people, I hope someone can help me with this. The system is connected with 8 PLC's. I want to transfer the data memory of a PLC to another like this: D850 from PLC2 to D900 PLC1 D850 from PLC3 to D901 PLC1 D850 from PLC4 to D902 PLC1 D850 from PLC5 to D903 PLC1 D850 from PLC6 to D904 PLC1 D850 from PLC7 to D905 PLC1 D850 from PLC8 to D906 PLC1 The data memory is an integer. -
I am using PLC Modicon M221, I want to make communication between PLC Modicon M221 to OPC Kepware by modbus tcp/ip ethernet. In PLC, I use software somachine basic, I set digital input and digital output. And in OPC Kepware my address 00001, but when I switch turn On/Off in PLC, value in OPC Kepware doesnt change. Could you please correct me? Thank you Bujang
-
Hello everyone, I need to move an iFix 3.5 application to a new machine (VMWAre W2K session). The application is set up to communicated via ABRSTSR driver to 3 SLC/505 series PLCs (my VMWare session is not connected to any PLC) and starts in run mode. When iFix starts up, I get a CoCreatedInstance() Failed error messages that I can't shut off and following this, I get probably a dozen Workspace errors saying "Error occurred in d:\ifix3x\dynamic library\scripting\project.cpp at line ..." By the time I finally get to Login as an administrator, the Workspace Runtime locks up due to communications transaction errors. I get another error window asking if I want to Skip or Skip All. Neither option works. The application basically locks up right as I get into Development mode and I can't do anything. In other words, I can't shut off the runtime because I can't get into development mode. I tried a number of things, including removing tasks from the task configuration SCU. I can't find any information about this online and no information on iFix 3.5 either. This application is from 2002. Any help is welcome. I was trying to force the Workspace into Configuration (Development mode) before starting up, but haven't found a way to do this either. Thanks, Rick
-
Hello, Completely new to Mitsubishi PLCs and I need to use a date and time stamp for data collection purposes. We have a Siemens PLC as well and this has the data type "Date_And_Time" which is what I need to replicate. I have been attempting to write my own data type but am struggling with how to go about this as it is not straightforward and I cannot find anything about how the Siemens Date_And_Time is made up so I have nothing to go off. Does anyone have an example of a data type they have made that is the same? Or is there a data type which does this already in GX Works 2 that I just can't seem to find? Please help!
-
Hi Everyone, I would like to know if two S7-300 CPU can exchange data via MPI protocol using X_Put and X_Get blocks. is it possible to test the data exchange via PLCSIM to verify. CPU1 = 313C-2DP CPU2 = 312 Please advise. Thank you.
-
I have reloaded a IPC477D with Windows 7 64-bit and everything is working but since we do not have the original installation disk or ISO, we have no way to load the touchscreen driver. I am looking for any information that would lead me to the OEM for the touchscreen or if anyone has access to the IPC installation DVD, all we need is the touchscreen driver directory which should have both the 32-bit and 64-bit version. Siemens tech support indicated we must repurchase a installation DVD for $350.00 and it would ship from the fatherland and be here in about a week. Thanks in advance.
-
Good day! Please tell me the options for calibrating the touchscreen of the B & R Power Panel 100 4PP120.1043-31 Rev.K0 without BIOS. After the damage, the touch screen managed to calibrate. After replacing the touchscreen with a new serviceable one, it is impossible to "push" the buttons - you need to start above the button, off-screen. There is no project source. A faulty touchscreen also fails to do a calibration. Can I reset the default calibration settings? Where is the calibration table stored? Is there a way to immediately call calibration after power on? I would be very grateful for any ideas!
-
Hello!I am using MBE Driver v7.46b on Windows Server 2012 R2. Problem is that I can't save config file. I can edit Channels, devices and data blocks, I can see incomming values, I save a file without any message. But config file is not saved. In Event viewer I get error as you can see on picture. It says: Error writing to system registry: Driver App 00000001 \Driver defaults. Other error says: Error writing to system registry: ServerMsg 00C54BB8 \Driver defaults.Is it server or driver problem? Please help. At the moment I can't edit anything in driver so I can't configure it to use it with my SCADA iFIX 5.8
-
S7A driver shows same values for different inputs in data monitor
horvatmiha posted a topic in Siemens
Hello! I am beginner in PLC world, also in SIEMENS PLCs. I managed communication over private network. Now I have a problem that I get same values on all inputs. Picture below shows my configuration of driver and data monitor. First picture shows values when input I0.0 is in state 0. Second picture shows values when input I0.0 is in state 1. Physically on PLC only input I0.0 is forced to 1, input I0.1 stays 0. But data monitor shows both inputs as state 1. Where is problem? Is problem in PLC program, TIA portal? I saw some guys using DataBlocks but I am not skilled enough to use it. Third picture shows simple PLC program on my PLC. Please help. Thanks in advance! -
Hello! I am trying to connect my PLC with SCADA. I am using S7-1200 1212C CPU (RELAY outputs). My SCADA system is iFIX 5.8 with driver S7A. I am trying to establish connection via GPRS router (TCP/IP). Port being used is 102 (default by S7A driver). In my company we have private network, SIM card in GPRS router gets static IP (set by RADIUS server) which is 10.247.XXX.XXX. My PLC has IP 192.168.0.10 set in Project. I am not sure what am I doing wrong. How to correctly set IP address in PLC to communicate in private network via GPRS router with static IP? I already enabled TCP port 102 in my router but I am not sure to which IP should I enable it because I am not sure if IP address set in PLC is correct. Should I use some communication blocks in program? I also enabled PUT/GET function (see attached pictures). Please help. Thanks in advance! :)
-
Haiwell TV box for smart factory -- intelligence Dashboard
Haiwell posted a topic in For Sale, Employment, Services or Wanted
Haiwell large-screen controller TV BOX can realize the large-screen display of HMI images in the LAN. User can select, switch and view multiple touch screen images on the TV screen, and realize the function of large traditional electronic display board in the most cost-effective way. Through TVBOX, different sizes of touch screen images can be displayed on the TV screen. The scada, curve, formula, user rights and other functions on the HMI can be displayed on the large screen.Users can use remote controller or mouse by USB interface of TVBOX to realize the remote operation and monitoring of the HMI. One TVBOX, one TV, and multiple HMIs can easily realize the function of big electronic display board, which is widely used in agricultural greenhouses, aquaculture, libraries, production workshops and other large screen data monitoring and display applications. Remote management : Supports display, access, and remote control of HMI within the LAN. There are so many industrial automation suppliers, it is really a headache issue to pick right partner to work with. Haiwell partners are applied Haiwell solutions in smart factory. Now we are looking for global distributors. So it is time to make up your final decision. To win or lose, your choice. If you are ready, check bellow details and contact us: http://en.haiwell.com -
Haiwell PLC HMI SCADA looking for our global distributors
Haiwell posted a topic in For Sale, Employment, Services or Wanted
There are so many industrial automation suppliers, it is really a headache issue to pick right partner to work with. Haiwell partners are applied Haiwell solutions in smart factory. Now we are looking for global distributors. So it is time to make up your final decision. To win or lose, your choice. If you are ready, check bellow details and contact us: What Haiwell do, not only PLC, not only HMI, or even SCADA. We are helping our partners to grab the future. My Wechat/Whatsapp: 0086 15880530763 Email: osgood@haiwell.com Company website: en.haiwell.com
