Search the Community

Showing results for tags 'hmi ntst nt support tool'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 24 results

  1. Hi Everyone, I've had V32 installed for at least a year but haven't had much need for it until this month. I installed a new activation on Friday that I thought crashed V32, which was weird because all the other Studio versions were working. Any time I tried to open an existing project or even create a new one, I would get an "access violation was generated" fatal error. I reached out to a colleague who found a tech note on the problem. Turns out the activation had nothing to do with the crash but rather, turning on the bookmark tool bar caused it. If you have the bookmarks toolbar turned on in version 32  the Windows desktop needs to be set at 100% magnification, not 125% which is the Windows default. Right clicking on the desktop, picking display settings and changing the scale and layout to 100%, then rebooting the computer fixed it. But now all the Windows icons are really small. I've been spending most of my time in V21 through V28 until recently. Since we're all likely going to be seeing more V32 in the near future, I'd thought I'd pass this on.  
  2. Hi Everyone,   I have  NT31C-ST142-V2 and it has a prompt of "System Program not exist or incorrect." I am trying to transfer via NT Series System Installer but I am getting a time-out error. I have Xm2S-09 serial cable with ATEN serial-to-USB cable.I know it is not broken since I can still Upload/download on a CJ2 PLC. I just want to know what other things I can do upload a systemprogram. I have seen a comment on this site that he remove the battery then tried to upload again.   NT is almost 15 years old. I have a back-up program.   I can't seem to upload by this time for pictures of theH MI and the screenshots of software .
  3. I have an issue with a servo drive MR-J4-70A from Mitsubishi, the thing is that it was running okay, but after a shut down it started to display an error and stop, the error displays is "AL 30.1", I reset it but it display the error y stop again, so in this case I would like to know what could be the problem. thank you in advance.
  4. I have an issue with a servo drive MR-J4-70A from Mitsubishi, the thing is that it was running okay, but after a shut down it started to display an error and stop, the error displays is "AL 30.1", I reset it but it display the error y stop again, so in this case I would like to know what could be the problem. thank you in advance.
  5. If it is about changing Gmail ID on phone it is advisable to open the device settings application further at the top the user should click the personal information account then under the “Profile” or “contact info” the user should make the necessary changes. If you are still looking or searching for more information than in that case it is advisable that the user gets connected with the certified Gmail technicians. Lines are open for help and support all the time there is no such issue that cannot be resolved by the Gmail technical team.
  6. Conversion from A to Q

    Good Evening everyone, I do realise that this has possibly been done before but quite a few years ago and the links no longer seem to work or links to Mitsi pages that are in Japanese, so please excuse me. I have soem A series PLC kit that needs replacing and I have bought all new Q series stuff to replace(where possible). I have been languishing a little on this project now for a few months but need to get moving. I purchased a GOT HMI and got a good deal on the HMI and the complete Mitsubishi Software Suite the local Mitsi guru said that was all I needed to get the job done. But afetr delving into what came inthe box it seems I need a A - Q Conversion Support Tool https://www.mitsubishielectric.com/fa/products/cnt/plca/pmerit/renewal/case/support_tool.html However I cannot find the software on any of the DVD's that I have and I cannot seem to find a download. So I am stuck now. Can anyone help point me in the right directon? Any Help greatly appreceiated. Thanks in advance.    
  7. CompactLogix E/IP to Kuka KRC 4

    Hello everyone,   I need to communicate a CompactLogix to a Kuka KRC 4 by Ethernet/IP but I do not know to generate the EDS file..... any clue please ?
  8. In order to conduct a change or a reset of the password, the user should follow the given steps- • Open your Google account in order to sign in. • Then under the security section select signing into Google. • Then select a password as you will have to sign in again. • Then in the field enter your new password and then click on “change password” and if you need any sort of further help connect at Gmail Support Number UK 
  9. Why am I receiving a Gmail verification code without requesting for it? There can be multiple reasons for you receiving a verification code without requesting for it there is a possibility that someone who knows your Gmail ID is trying to get an access to your Gmail account or if you are trying to log in your account with a new or an unauthorized access, Google will always send you a verification code if you will open your account on a device on which you have never opened it before you will also receive verification code whenever you will enable 2 step verification for your Gmail account.
  10. hello everyone,,,, I want to running the motor in 100 rpm but how to setting electronic gear to control speed in servo motor HG-SR502,, does anyone know how?
  11. Geo1000

    Hello all, I have a problem with PLC at work. I am working on historical code with a view to upgrading it for a roll out program to all site based PLCs. The code is to be downloaded using memory cassettes, and there is data on the PLC's which needs to be retained. I have re-worked the code and it performs as I would expect as per the following: 1) I download original code (V2.01) to PLC using CX1 2) The PLC simulates a cycle and various values are stored (the key variables are Installation Date and Service Due date). 3) I then download my code to the PLC and the variables have been retained. All so good so far.   The problem is that the factory production line uses PLC code saved using the PLC Backup Tool. When I download the original code to the PLC using this tool, I encounter various issues, but the main one is to do with real time PLC clock values. When I download the code direct from CX one developer,  I use the MOVD(083) instruction on A352 through four to give me a variable with the date, month and year. This morning (29/01/2019) the BCD values read as 41, 1 and 25, which translates to 29 (0010 1001), 1 and 19 (0001 1001). When I download the backed up code using the PLC  Backup tool, the values are totally different. I have run the backup files for both codes through a comparison program and there are no differences between them at all....... Can any one advise if they have experienced this before??   Thanks.
  12. Connected Components Workbench

    First time using Connected Components Workbench and am modifying an existing program,  does anyone know why and how the original IO_EM_DI_ numbers have been changed and not just the alias'. When I right click and select properties for each tag it gives the address and says 'Read only cell' generated by the I/O wiring tool indicating the I/O channel to which the variable is wired' Any help would be great thanks!
  13. Hello.. I have hmi Proface GP-4301TW, USB type B cable and ethernet cable. I want to transfer the program to the hmi but I cant. When I turn on the power of hmi,  a series of test appears and finally it looks like the photo below and I cant enter the offline menu.. can anybody help me to solve the problem?
  14. NT Support Tool Ver 4.87

    Hi guys, I need to upload an NT31-123B-EV3 IHM (System Ver 4.2), but the software I have installed is NT Support Tool Ver 4.87, does not include the PT model I need (System Ver 4.2), has only NT31-V2 / V3 (System Ver 3.1 / 4.1). Does anyone have a solution to this problem? obs: * HMI:         NT31-ST123B-EV3 (System Ver. 4.2)         * Software: NT Support Tool Ver 4.87 Best Regards,
  15. I have a coworker who swears up and down that he once came across a bit of software that would allow one to mount the cf card of an Allen-Bradley plc on a windows computer while it was still in place in the plc, or at least access the contents of the card. Has anyone ever come across this unicorn?
  16. Omron Support tool

    Good day, I am trying to upload a programme to a Omron NT600S HMI, can anyone advise or help me with the right support tool software that I need. Thank you
  17. Communication between CJ1M and NT31

    Hi, i have difficulty to make a CJ1M cpu11 communicate with a touch screen NT31. the plc port is set : host link  in the TS menu i cannot change the comm A method to host link ( invalid comm method) . i tried with the port B (RS-232C) the cable is 25 pin (NT) and 9pin (PLC) with RTS-CTS shunted 2-3  3-2 7-9 Please help me. Thank you.  
  18. Tool for I/O distribution

    Hi, I am looking for a tool to make I/O distribution in a PLC of around 1000 I/Os. I have a lot of redundant signals (2oo3, 2oo2) and I have to make a consistent distribution in the modules and racks considering some criteria: different channels of redundant signals in different racks, etc. Normally I have done this manually but I wonder if there is a tool to do this much faster and without mistakes. Builders from manufacturers, like TIA portal from Siemens or IAB from Rockwell, are of course very product oriented, they are a great help to select the right hardware, as far as I know they are not able to distribute redundant I/Os. Anybody knows if a tool like this is available?
  19. Powerflex 700 software

    I am told that Rockwell A B offers software to allow a laptop to hook up to a 700 drive and review the parameter. Does anyone have a link to the page or can point me into the right direction. I have an application where the end user would like to access the list via laptop and make changes if necessary Frank
  20. Hello! I am creating a project with Logix Designer, version 24. In the project I am using 1734-AENTR/B devices in etherner/IP-bus. I find out that there is only old versions of Logix Designer, only Major version 3 and 4 but the device that I have is the version 5. So I downloaded this EDS-file from Rockwell support-pages and installed it with EDS HW tool. After this, I can not choose this device 1734-AENTR/B with Major version 5. How to get this installed version to the project? After installation I have reboot my programming device and there is not RS Linx running in my computer.
  21. CPM1A Backup/password

    Hi all, I hope one of you kind people could help me: I have an Omron CPM1A CPU where the outputs are damaged. I have a new blank CPU and I would like to transfer the program, however, the UM is read-protected. The backup tool doesn't seem to cater for the CPM1A. Is there any other way the program could be transferred? The customer does not have the program or the password. I do not believe that I am interfering with any intellectual rights here because the OEM are long since departed and all I want to do is transfer the program, not modify it. Many thanks in advance. JG.
  22. Hi all, I have a new problem. I have to translate NT631C application from Dutch to English(or Serbian). I uploaded *.mmi language file with translation utility and start translation but now I want to "merge" new mmi file with onw file(application) to see how new language looks like before downloading it to the touch terminal. Is this possible or I have to download new mmi to touch and then upload whole application again? P.S. Touch is on site 100km from my office.
  23. Hi everyone! I'm trying to update a NT31-ST122B_EV2 to a NS5-SQ10B-V2 but I'm having trouble converting the .mmi file (the one from the NT31) to an .ipp (for the CX-Designer) The utility that I'm using to convert the files is the support tool for convertion NT31C_631C, the one from the CX-Designer Tools. The convertion marks as OK but when I try to open the resulting file to the CX-Designer, it appears a message saying that the file is corrupted and if aI want to restore it. Even if I select YES or NO, I cannot see anything in the project, also I try to dowload it directly to the NS but nothing appears in the HMI. Is it possible to load it or convert the file in other way? Thanks for your respones.
  24. Hello every one.I am a new to this field. i uploaded a program form Omron NT31c-V2 using nt support tool and I want to download it to Nt31c-v1. Do i need some converter to Converet Nt31c-v2 program to Nt31c-V1 ? I would also like to ask that it is possible to convert the program to other Nt series model like Nt31, Nt30 and other if program memory is compatible.Plz reply.Thanx