Search the Community
Showing results for tags 'hitachi h-702 series mode simulation'.
Found 126 results
-
Hi All, I need to start PLC Data Logging using an SD card in the CPU module for an iQ-R PLC. I have not attempted this kind of logging before and I was wondering about any restrictions on the type of SD cards that can be used. The documentation I have found says "SD/SDHC memory card: 32Gb maximum". Does anyone know why can't I use a 64 GB SD card ? (maybe due to addressing limitations?) Also, when I look for SD cards, I see different speeds of data transfer such as 120 MB/s or 100 MB/s and I was wondering if there is any difference as far as the logging is concerned. Does anyone know if there are any other restrictions, brands that don't work? Useful tips? Cheers
-
Hello, I am trying to do something tricky today by simulating an IQ-R plc(R08CPU) in gx works 3, and to make it connect to Fernhill SCADA as well. All done on the same PC. My goal is to see that I can make the IQ-R series work with Fernhill as that is also a question I want to solve before buying the PLC and I was hoping I could use the simulation for this. I have tried searching if this is something that will work at all and so far I have not found anything... It feels like it is a very special case to have both the simulation and the SCADA on the same pc for one, second is that I don't know how the simulated PLC's IP address will behave, I cannot ping it for instance. The first step of my issue is, My simulated PLC has an IP address. In my mind I should be able to ping this address on my PC, which I cannot. If I cannot use the simulated PLC's IP address, I will have a hard time connecting it to the Fernhill SCADA. Second step/question is, will the Fernhill SCADA be able to work with the simulated PLC? help is appreciated!
-
Hi guys. I found error on PLC and from PLC diagnostic I found this Operation Error 4100 as per attach picture. FYI, there is no SD card mount onto this PLC. I wonder what is ATA card. This error wont affect the operation. Any advise on what to check? This ladder is pop up when I clicked, error jump. Thanks.
-
Hello all, We’ve been having some issues with Analogue Output cards (R60DA8-G and R60DAI8) on some projects we’ve been doing and wondered if you could help. On one site where we are using the R60DAI8 we have the following issues: when a valve is failing on site (wired to the first analogue output channel) the ERR LED comes on for the disconnection detection error, should this error come on with a valve failure/instrument failure or should this be for physical disconnection only? Also, site are reporting that the other valves analogue outputs on the card stop working when this happens. We have had a response previously from Mitsubishi support suggesting that this shouldn’t happen (basically they pointed to noise), could be wiring or it could be caused by external noise. Would replacing the R60DAI8 with an R60DA8-G resolve this issue? General issue for both R60DAI8 and R60A8-G: When the Disconnection Detection Error is no longer present the ERR LED is still on so we have had to issue a reset to the “Error clear request” bit of the card (YF) to clear the error (currently a manual action from the HMI). Is there a way that this can auto clear when the detection error is no longer active? The only other way we can see to make this clear automatically is if the card has an error we could periodically issue the “Error clear request”, is there any issue with doing this if there’s no way to set the card to auto reset? The R60DA8-G has a detection auto-clear enable/disable setting but only has 100 times and from the manual this suggests a 100ms period between resets, so does that mean it only checks to auto-clear for 10 seconds the ERR LED is on and requires the “Error clear request”? Any help with this matter would be much appreciated.
-
hello everyone, I want to ask this setting. If I check this check box, what will happen to the program that I input into the HMI? can someone give me examples for not allow upload and not allow decompile?
-
hello, anyone. I want to ask about file which is I cant open. I was uploding HMI NB series but the file is only .pkg and when I decompile, it cant be done/ failed.. can anybody help me and explaine how is it can be? I use NB3Q-TW01B. thank you.
-
I have a program to convert from Series Six to RX3i and the series six is using expanded addressing. I need help to convert this to standard addressing. I found a manual for this but I still can't figure it out. For example I have addresses I1+0201 I1+0203 I1+0205 I1+0206 I1+0207 and need to represent them in RX3i. I attached the 3 page "manual" on extended I/O for reference. Thank you in advance for looking at this Series 6 Expanded IO Addressing.pdf
-
which programming cable use for Mitsubishi Nexgenie 1000 Series (NG16DN) PLC
A-ONE CALIBRATION posted a topic in Mitsubishi
which programming cable use for Mitsubishi Nexgenie 1000 Series (NG16DN) PLC ? PLC has 9 Pin D Male Connection. -
Create a project in GX Works 3 with R02 CPU. Migrate A1SH CPU Project to R02 CPU
Joao Marques posted a topic in Mitsubishi
Hello, I am trying to create a project in GX Works 3 with a R02 CPU, but in the "New" Tab "Change Module" Tab this CPU doesn't show. However, if i gow to Module Configuration i can select and drag the R02 CPU, but i can't define it as the CPU of the system. Another problem i have is that i need to migrate a A1SH CPU project to an R02 CPU project. From my understanding the software tool for A1SH is GX Developer and for R02 CPU is GX Works 3. Is there a way to convert the project or i need to do a new one and adapt it? Thank you. -
I finally got my LM6PC software to communicate with my series six CCM 2 card. The CCM2 has 2 ports. I am trying to use both ports at the same time but when i go online with my lm6pc software it kicks my nematron HMI offline. I believe both ports are independent so i am not sure why the HMI is getting kicked off. I have another CCM card and would be open to having 2 CCM cards in my rack but when i tried this both cards failed (bottom LED in OFF state). FYI - running Win 10 with DosBox 0.74 using docking station com1. Fought this thing for 2 days until i realized i was using the wrong CPU ID. Project background - replacing series six and genius blocks with RX3i and EP IO. Trying to reverse engineer nematron HMI and wanted to be able to view data tables while surfing the HMI to map out the IO addresses. Thanks for any help. Steve
-
Hi everyone, I recently started in the automation industry and am currently working on an Omron project. So I have two programs, one on Sysmac Studio (which has the HMI) and the other on CX-Programmer. I am trying to simulate both simultaneously using the Sysmac Studio HMI. Is there any way I can do that where for example I can toggle stuff on and off from the Sysmac HMI and get feedback from the CX-Programmer ladder? Thank you in advance.
-
Salutations! So recently I'm very confused with my CX-Programmer. Everytime I tried to run the Simulator from CX-Programmer, I always got a notice that a certain program called KickEngine.exe is about to Run. I look up for this program and found it inside CX-Simulator folder, so I decide to run it anyway. The problem is the simulator always return the error : "The selected port does not exist". In other words I cannot run the simulation. I understand that the simulator uses ControllerLink comm. between CX-Programmer and CX-Simulator, so I tried to run those two separately and build the connection, but also to no avail. Even so, since CX-Programmer 9.0, I believe there is no need to run the programs separately. Before I had a similar problem where the simulator cannot be run, and the error code is "Failed to Start Ladder Engine". This was solved by removing whole Omron software using CX-Remover, then reinstalling again. However, it doesn't solve the current problem. If possible I don't want to resort to reinstalling the whole OS... T_T Anyone has suggestions or ideas? I had lookup on an older thread and tested the measure taken there, and didn't solve this. Thanks!
-
I am trying to set up a string compare [ $= "Text" D### ] . But it's not passing when it should. So i tried pushing the string to a place holder register [ $= D###1 D##2 ], but its still not matching, but when i just do a double compare [ d= D##1 D##2 ] it passes. How is my string failing but the numbers obviously match? Struggling to get picture to attach. Please see here for example. https://imgur.com/a/w1ckk64
-
Hi all. I have a 1769-IT6 thermocouple/mv input module. It is connected to a micrologix 1500 unit. The green okay light illuminates on power up, but after you download the program and put it in run mode the processor faults. Terminal block with the cjc's are on the unit. The error message just says the I/O module has encountered an error. The hex code under status bit 6 is 179h. This error code is not in the manual. Has anyone else encountered this? Oh and I only have channel 0 enabled for type k thermocouple. Has anyone else had this issue, or know if it is a configuration issue. Any help would be appreciated. Thank you.
-
[Demo Software] - GE SRTP Ethernet Driver Library for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1 - ASComm IoT
Automated Solutions posted a topic in Download Comments
View File GE SRTP Ethernet Driver for .NET 6, .NET 5 & .NET Core. - ASComm IoT ASComm IoT for .NET 6.0, .NET 5.0 & .NET Core developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with GE/Emerson SRTP PLCs and compatible devices via Ethernet. Does not require OPC. Does not require 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 6.0, .NET 5.0 & .NET Core targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux, Android and iOS Extremely high performance - 5~10 mSec typical transaction time Supports PACSystems family native tag names Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications Submitter Automated Solutions Submitted 12/05/22 Category Demo Software -
GE SRTP Ethernet Driver Library for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1 - ASComm IoT
Automated Solutions posted a file in Demo Software
Version 1.4.1
10 downloads
ASComm IoT for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with GE/Emerson SRTP PLCs and compatible devices via Ethernet. Does not require OPC. Does not require 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux, Android and iOS Extremely high performance - 5~10 mSec typical transaction time Supports PACSystems family native tag names Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications -
Hi, I was wondering if anybody could post a photo of the Logicmaster 6 IBM PC keyboard translator chart? This is a 'tear out' page from an appendix in the Logicmaster 6 programming manual. The 'Logicmaster 6 Programming and Documentation Software User Guide' Appendix C refers to this chart as follows: "This appendix contains a keyboard translator chart to use with the IBM-PC, PC-XT, PC-AT, or IBM-compatible personal computer. The chart has been printed in triplicate to provide you with extra copies. The sheet has also been formatted so that you can remove each copy of the chart from the manual for easier reference." All the hard copy manuals I can find have this keyboard chart removed and online pdf copies do not show this page. your help would be appreciated.
-
-
[PLC Sample Code] - Function block on ST for algorithm DIFU DIFD
drYurban posted a topic in Download Comments
Function block on ST for algorithm DIFU DIFD View File An example on ST is the definition of the fronts of a discrete signal. Submitter drYurban Submitted 10/05/22 Category PLC Sample Code -
-
valve_control View File A working example of an FB to control a valve from an HMI panel. Controls closing/opening times, plus a little visualization. Submitter drYurban Submitted 10/05/22 Category PLC Sample Code
-
NA HMI "NullReferenceException is thrown at SetLanguage"
Transistor posted a topic in NJ Series / Sysmac Studio
I'm editing a dual language project for an NA5 HMI. It's working fine except for the message at startup. To modify the project I've had to update the firmware on the HMI. I'm using Sysmac Studio 1.15. Startup language seems to be set correctly. Any ideas? -
Hello everyone I have Mitsubishi HMI GS2110 WTBD- N. It is connected with FX5U with Ethernet protocol. I want to run a printer directly from HMI with RS 232 without using RS232 adapter card. Can someone please help me what to do and how to do. Regards
-
Hey, does anyone know why the simulation mode is on? how to change it? (LED SIM )
-
Hi, So I have a problem, that BootP DHCP server doesn't find my 1734 AENTR series B and so I can't assign IP address to it. Been trying many things. Any advice? I'm new to AB and I guess it may be a really easy thing but so far I didn't find a solution.
