Search the Community

Showing results for tags 'heavy ethernet problem'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 219 results

  1. Hello, I am hoping I can get some assistance configuring an Allen Bradley PanelView C600 (2711C-T6C). All a long I have been able to communicate with the HMI using Ethernet protocol, but after I switched communication settings to what my Professor recommended by using the Panelview software, the Ethernet connection seems to have stopped working. The HMI has now been reset to the factory settings (by pressing ctrl + shift during start up then selecting F1 when prompt appears asking if the user desires to return to factory condition of terminal). Once the terminal resets I am able to eventually get to the configuration screen. When in the communication settings Protocol says "*", Status says "Unavailable", I've changed the device name to "plc" and the Node Address says "0". When I click on the "Ethernet" option the IP mode says "DHCP" then the IP Address, Mask and Gateway all read "0.0.0.0". I get into CMD/DOS PROMPT on my laptop while the terminal is connected to my laptop via an Ethernet cable and type in "ipconfig" to see if my laptop is communicating with the terminal but it is not. The lights where the terminals are located are also not blinking. After plugging in several different Ethernet chords from the terminal to my laptop I am convinced the issue is not the cable. I've tried resetting the terminal several times as well and I'm having no luck. Can anyone assist me with regaining Ethernet communication with the terminal or some work-arounds? I see there is an option to use the USB but it looks like AB no longer provides the drivers on the website. If it helps, the manuals I am using are 2711C-UM001 and 2711C-QS001.
  2. I have the Ultra 5000 Intelligent Positioning Drive for lifting purpose. Now currently the only way i am able to go online with the drive is through the Serial Communication cable (db9) and till the time i am online with the drive the movement of the lifting operation has to be put on hold.  So is the anyway possible to go online with the ultra5000 drive on the wireless network?  need some suggestion on accessing the drive parameters over wireless network instead of conventional serial communication cable. Thanks
  3. Hello,  I am a newbie to the Omron world. We have a new machine come in made on Omron PLC, we are trying to get it connected to our OPC server so that the server can read and write tags via ther Ethernet/IP protocol. We have given out ethernet card 10.14.9.187 IP and the NJ501-1300 controller is on 192.168.250.1. But still our OPC server cannot see the tags/variables. I dunno if we have to add the ethernet communication card to the network configurator and add the tag sets ?  We are also getting a tag resolution error on sysmac studio while being online.    Thanks Pratik 
  4. HI  , I would like to ask you for your opinion    THIS IS MY PROBLEM WITH THE kinetix 6500  The equipment was working fine , but now i cant make to servo move with the program, cant run the test or autotuning    Status in front of servo drives say running. Everything is green, no errors,     when I activate the MSO  I can hear a click  at servodrive, but the servo is not energized, because i dont hear the usual noise when the servo is energized, I have check the cables and conectors, everythig is fines, I check the servo resistence , no shortcuts or open lines, The wierd part is when the servos are in the running state i can move by hand, they are supossed to be locked.     after that I activate the home MAH, or test or autotuning , or a direct command ,and then it  fails  When i try to jog . move, test or  autotuning  the servo it says s55 velocity error or excess positon error, i can not get servo to move at all I can see the position from the encoder back to the plc. I have turned the servo and i see the position at actualposition     Before the equipment was working , moving , I just swith it off one day, and the next day I couldnt make it move   Best regards    I have added the programm as an attachment k6500.ACD
  5. schneider somachine

    hello everyone,  Im new with schneider electic , ı m planing to work with Altivar 630 variable speed drivers and i want to control it with M241 plc in somachine . but when i want to configure in somachine i could not add the driver to my hardware. is there any document about it ? or does anybody control it like this ? 
  6. Gentlemen, I am beginner in field of PLCs and I need some help to create backup of project / program running on PLCs installed at our project. We have a  Quantum Hot Standby PLCs ( 140 CPU 67160) installed at our water treatment plant; we connect to PLC via ethernet (TCP/IP) and I am preparing backup of these installed PLCs as vendor did not give us backup project files and provided little useful documentation.  The problem is that, I have transferred the project from all of the PLCs using UnityPro XL, but for one PLC, when I connect to it the "transfer from PLC" option is not available. I am hoping if someone could help me with that.
  7. Version 1.0.0

    54 downloads

    Using this module to replace of FX3U-ENET to reduce the cost(if not using the e-mail function)
  8. FX3U-ENET-ADP User's Manual View File Using this module to replace of FX3U-ENET to reduce the cost(if not using the e-mail function) Submitter pigflying Submitted 01/19/17 Category Manuals, Tutorials
  9. Dear, i am doing one project on Omron PLC with VB.net.  i am using Ethernet communication  with  VB to PLC but i am unable to show analog value on VB page please guide me how to get data of analog value in vb and show in VB.net for DI/DO i am using CIO &H0  forreading   and  &H1 for write but for analog value how i will show on VB.net.
  10. Hi again I browse through half a dozen mitsubishi manuals but turn up nothing for mitsubishi plc cross-communication. In this project there are about six L-06 plc:s. All are on the same ethernet network already, communicating nicely with the SCADA system. Per today information is (temporarily) exchanged via the SCADA system. Here is another hole in my knowledge. Namely how to correctly setup communication between these plc:s. I plan to continuosly exchange some 50 bytes of information. I would be grateful for some pointers and/or perhaps a reference to a manual. Cheers to all of you //
  11. tec

    good day to every body im trying to replace old tuche screen [omron nt20s-st121-v1] to new one [[omron nt20s-st121b-v3]  thay look  indentical and the manuel  show they replacabel] i use nt tool software that i install from cx0ne file . i  upload the data and screen grafix from the old one and i see it on my pc . but i cant download it the the new one,,   i see masege on the pc: [dowload aborted  please refer to error log] the error log write many error like:: memory utillization has exceededthe 96,00 kbyteslimit by73.68kbytes small aplication that i wrote just for cheaking go well and download  i wonder maybe it the nt tool but all the other aplication from that disk cxone work good [plc + hmi +servo ] i hope someone  help mordehay 
  12. Hi. Can anyone help me on how to connect to OMRON cj2m with fins or ethernet/ip protocol from windows ? Is there any vb code or javascript ? I saw an omron fins javascript  topic from patrick  but i was not able to connect with the plc.  How many steps are needed to connect ? Thank you.    
  13. Hi. I'm hoping someone can give me an answer on this problem I'm having with a FX3GE PLC. I am trying to get a FX3GE plc to communicate to a drive over RS485 using a FX3G-485-BD card. In GXworks2. But am having no luck.  I have tried changing the PLC communication settings in PLC parameters between CH1 and CH2, But am unable to get any communication working on the front port. I have also tested with a FX3G-232-BD RS232 card and have the same problems. There is no activity on the SD RD led's and no data being sent. If I put the FX3G-485-BD card in a FX3G or FX3S PLC I have running the same code it works fine. So the problem I'm having is with the FX3GE PLC Please can someone tell me what the difference is with the front Communication port on the FX3G and the FX3GE. And how I can get the FX3G-485-BD card working on the FX3GE PLC. Thanks
  14. I'm searching for supported EtherNet/IP CIP objects documentation for CJ2M. With Wireshark, I see unknown service 0x54. Thank you!  
  15. Videojet 1620

    Hi guys, currently working on the communication with videojet 1620 printer (Continuous Inkjet Marking), in there operators manual (http://www.videojet.com/content/dam/Countries/North%20America/Operator-Manuals/CIJ/1620-Operator-Manual.pdf)  the say : - How to Configure Ethernet Port Refer to WSI/ESI Communications Protocol addendum for more information. But cant find this addendum anywhere in the web, all i did found is this pdf attached "Videojet 1510 and 1210 Simple Communications Protocol". I'have try it with th eprinter using the Ethernet port and all i can find open is the FTP(21), 3000, 3001 and VNC(5900). An d i have send same packets from the WSI/ESI to the print via 3000 and 3001 with Packet Sender but the response was empty!! is there any one that know this protocol ESI/WSI or did work with this printer or simillar ?   i found this info in the FTP folder : <?xml version="1.0" encoding="utf-8"?> <CONTROLLER_INFORMATION>     <START_DATE date="07/09/2016"/>     <HARDWARE BoardType="CSB4"/>     <VERSIONS>         <WINDOWS_CE Eboot="4.0.3" CE_Image="2.0.9"/>         <SOFTWARE Type="Excel" Version="1.0.423.0" SVN_Build="28116M"/>     </VERSIONS> </CONTROLLER_INFORMATION> 180020947-Videojet-WSI-Protocol.pdf
  16. I have a compactLogix L24.  It is connected to a network switch.  I also have an ethernet servo driver (KM AKD) attached to the same switch. The CL L24 IP address is 192.168.150.1 The Servo Driver is 192.168.150.3 In RSLogix 5000, I added an ethernet module.  I put in the IP address for the servo driver.  When I go online, I just get a connection error (Code16#0204).   I can talk to the servo driver using my PC on the same network (192.168.150.13), but the CompactLogix won't talk to it.  Do I need to install an external ethernet module to make this work, or can I use the existing ethernet ports on the L24? I'm stumped.
  17. CJ1M CPU11 how to set IP adress?

    Hello, I have to work now with a cj1m cpu11. I would like to connect it to a ns10 display. My first obvious problem is when i made the project in cx programmer, that unlike in cj2m i wasnt able to select the cpu unit in the IO table and set the ip adress. How do i need to set the ip address? im reading an omron guide, but it is confusing, and so long, i only want to set the ip address :/. Also how can i set the fins network to 2? On the cx-designer i set the network address:2 and the node adress:40. I know that the 40 means the end of ip address. Thats why i want to set the plc. How about the network address 2?  Help is much appreciated. Thanks!
  18. GOODDAY EVERYONE, PLS I'M HAVING PROBLEM WITH MY ALLEN BRADLEY PV 600 USING ONLY RS232 AND ETHERNET CABLE ONLY I DON'T KNOW HOW TO GET TO THE FILE MANAGER IN OTHER TO ACCESS THE APPLICATION ON IT. PLS HELP ME OUT
  19. NX-EIC202 Utility

    Version 1.15

    75 downloads

    A nice little utility created by PMCR that calculates the power consumption for NX I/O, provides the I/O layout for a given allocation, creates symbols for use in CX-Programmer and aliases for use with an RSLogix5000.
  20. Hello everyone, I would like to know how is the Ethernet communication in Micro830 PLC's. I'm about to do a communication between a micro830 and SMC actuator drive and I want to know how set Micro800 Ethernet communication. This is by explicit messages or mapping?.   Tks
  21. I am looking for a device to allow communications to and from a series 5 Allen Bradley DH+ to a Schneider Electric M241 Ethernet IP. Or what is the best way to configure the M241 and third party communications module to allow the communications to DH+. Randy
  22. PLC+HMI cheap solution

    Hi y'all, I am looking for affordable and reliable PLC and HMI solution : PLC with real-time clock and multiple (>16) relay output, modbus TCP/IP Simple HMI even 2 line LCD will do. Thanks in advance
  23. CJ2M CPU - Omron FINS Vs Omron EIP

    I want to implement Omron CIP, which communicates with CJ2M CPU35 Controllers across an Ethernet/IP network using the Common Industrial Protocol (CIP). Which commands they will use? FINS? or some other commands? Can someone help me to understand the protocol or command structure which can be used to implement Omron CIP (Ethernet/IP)?
  24. Hai dear all , i am facing a problem with  Rsview32 . In my rsview32 project "derived tags,data log,alaram log are not working but it shows status of another tags comming from PLC.Before this tags are working properly.i tried I restarted review 32 project and computer,command line enter "derived on (file). Still it is not working.anybody can help me for solving this problem.
  25. Hi, I am working on a project that requires connecting an EtherCAT network and an Ethernet/IP network to the built in ports of the NJ controller. I have been able to setup the EtherCAT network in Sysmac Studio, but I am struggling with the Ethernet /IP setup in Sysmac Studio. For the Ethernet network I have to setup the Motoman DX200 and a Cognex In-Sight 7000, as well a NA HMI which I was able to figure out and have it setup in Sysmac Studio. I have the EDS files for both Motoman and Cognex and the are installed in Sysmac Studio. I am a confused about what to put in the target variable and the originator variable, as well how can I connect these to my Global variables?