Search the Community

Showing results for tags 'gxworks3; cclink; rio'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 11 results

  1. I need to know what kind of connector/cables i can use for my network: Topology, ( all on one switch): * Ethernet: FX5U, GOT, Safety PLC (WS0-GETH00200) * CC-Link: 2X  Inverters FR-A840-00023 Does this systeem needs the RJ45 4wired  or  8wired cables/connector?
  2. hello all, I plan the work with project to monitoring waterpump yaskawa and power meter scheider,, I want monitor all of that from the office using  EcoWebServerⅢ and ecomonitor plus,, has anyone ever integrated them all?
  3. GX Works 3 Remote IO setup

    Hello. I am told that the use of a remotehead IO-module demands that a separate project is necessary. Is this true? I am using a R32EN cpu.   EDIT: Just received word that it's because it's necessary for hotswap. Cheers // RI
  4. Change PLC model in GX Works 3

    Hello. The project I'm in have decided to switch cpu-model from R04ENCPU to R32. It does not seem possible to change it in the module config / hardware view. I try to delete the old CPU, but cpu module cannot be deleted... Anybody know?
  5. Hello all, I am trying to write one FB for Analog Scaling in GX Works 3 Software for my Mitsubishi FX5U Plc... Unfortunately i am not aware very much about ST Language instructions of Mitsubishi Softwares. So the Code is Giving 5 Errors, i think the error are due to incorrect data conversion expressions, Can you please correct me with my code ? Here are the Variables RAW_MIN                   Word [Signed]                      VAR_INPUT RAW_MAX                  Word [Signed]                      VAR_INPUT SCAL_MIN                  FLOAT [Single Precision]    VAR_INPUT SCAL_MAX                FLOAT [Single Precision]    VAR_INPUT AI_RAW                      Word [Signed]                       VAR_INPUT SCALED_OP_REAL   FLOAT [Single Precision]    VAR_OUTPUT SCALED_OP_INT      Word [Signed]                       VAR_OUTPUT Here is the Code SCALED_OP_REAL:=(((SCAL_MAX-SCAL_MIN)*(INT2FLT(AI_RAW)-INT2FLT(RAW_MIN)))/(INT2FLT(RAW_MAX)-INT2FLT(RAW_MIN)))+SCAL_MIN; SCALED_OP_INT:= FLT2INT(SCALED_OP_REAL);
  6. CCLINK program problem

    Hello everyone, I want to ask,, Does address mapping use this concept to do "remote i / o station" can be done? following the network parameter settings for CCLink and I tried to program with this ladder, is that correct?  
  7. I simply want to create a function that measures how long the machine has been running/functioning. I see the option to create the OUT T function, but that allows me at max to count up to 9999. Do I have to create some registers to continuously store this data?  Can I not just have it count up freely?  I have a couple other functions I need to run off of this further on, but this is the foremost issue. Any ideas? Thanks so much in advance.
  8. 1ms TON and TOF GX Works 3 FX5U

    Hi everyone I'm new to FX5U, 'cause I previously used Q-series PLC. So, is there any possibility to make on delay timer with 1ms PT?
  9. Hello everyone! Is there possibility to read words e.g. Name of alarm from the csv file or another file and save it in the PLC memory for further processing? It would be the best if the solution will matches to FX5 and IQ-R/F but it can be also for any of them. Thanks for help :)
  10. GX Work3

    Good day everyone. I like to know if anyone has worked with GXWork3 yet and what their view is on it?
  11. Combine 2 Machines with CC-Link

    I would like to combine two existing machines with CC-Link. Each machine has a QJ61BT11N set up as its Master Station. The larger machine has 26 remote I/O and 4 remote devices. The smaller machine has 1 remote device (see the attachment). Each are already programmed and running. The larger machine has HMIs that I would like add screens to in order to control the smaller machine as well. The smaller machine would basically just need to send and receive a handful of signals... start, stop, manual, origin, e-stop, fire specific outputs, etc. What would be the best way(s) or simplest way(s) to connect and communicate between these machines? I am open to any advice and ideas. Thank you Machine_Addition_Via_CCLINK.bmp