Search the Community
Showing results for tags 'gx works program step count'.
Found 138 results
-
Hi, I have a licensed version of Melsoft IQ Works. It has GX Works3, GX Works2, GT Developer (1000), GT Developer (2000), plus a whole bunch of other software packages that I have never used but it does NOT have GX Developer. The site I work at has a couple of old A-Series PLCs that I cannot open with GX Works2 or GX Works 3. These files have been successfully opened in GX Developer on another computer, but I do not have it on my computer. Does any know, does IQ Works not come with GX Developer? How do I get GX Developer? Does it have to be purchased separately? Any help is much appreciated. Kind regards, Olly
-
Gx Works 2 & Fernhill SCADA, cannot create bit IO tag, melsec error 4031h?
Dadde posted a topic in Mitsubishi
Hello, I have a Q02CPU and QJ71E71-100 terminal and want to do a simple test of the Fernhill SCADA system. I have successfully connected the Fernhill software project to my PLC and gotten a word variable from the PLC be represented by a tag in the Fernhill SCADA system. However, I have issues doing the same for my bit variables. In Fernhill they should be internal relays but I get error 4031h in Fernhill: Melsec Error 4031h - The specified device number is outside the device range. I do not understand what is wrong. My PLC variables are each a global variable, internal relay in other words. In Fernhill I define each tag as an internal relay. The "device" from my simplified understanding is the identity of the variable in the PLC. It matches the PLC and Fernhill as shown in the pictures provided. Thanks in advance! PS. I don't get the error if I define the tags as Data Registers instead like I did for the analog variable. But 1) That is not what they are and 2) The tags don't change when the PLC variable is modified. Just a bit suspicious that it stops complaining when it is clearly incorrect...- 1 reply
-
- fernhill
- gx works 2
-
(and 1 more)
Tagged with:
-
Hi all , I have been using MELSEC - Q series plc for the past two project i dont find any issue with that but for the third project used same PLC same model but there is issue which I found unable to resolve The issue is when i try to communicate PLC using LAN cable by direct ethernet connection it works normally but by communicating using HUB network I cannot communicate, I checked all the parameters setting, I dont know what is the issue even contacted mitshubshi service to troubleshoot but they are not responding So here i am for your guidence to solve this issue see the images below to analyse this issue This connection is direct ethernet connection which works normally The parameters are set and writed to PLC The IP is set to my PC for communication When i try to find the cpu in the network it shows the cpu IP After that I checked for connection Test it show error I have also attached the Network route which i used to communicate Network Drawing.pdf I hope someone will help me to solve this issue Thank you , madhan ravichandran
- 28 replies
-
- mitshubshi
- plc
- (and 9 more)
-
Hi all, I would like to know how to communicate scale indicator device mettler Toledo ind 320 using module QJ71C24N-R4 by predefined protocal I also tired to communicate in CH1 with the G.INPUT instruction to communicate when the device in MT continue mode it does communicate but I dont know how to convert value Now by trying modbus communication predefined protocal works fine but i cannot read data the is no SD/RD transmission happening Can anyone help me with this Thank you serial monitor.gxw serial monitor.gxw
- 1 reply
-
- mitshubshi
- program
-
(and 5 more)
Tagged with:
-
Create a project in GX Works 3 with R02 CPU. Migrate A1SH CPU Project to R02 CPU
Joao Marques posted a topic in Mitsubishi
Hello, I am trying to create a project in GX Works 3 with a R02 CPU, but in the "New" Tab "Change Module" Tab this CPU doesn't show. However, if i gow to Module Configuration i can select and drag the R02 CPU, but i can't define it as the CPU of the system. Another problem i have is that i need to migrate a A1SH CPU project to an R02 CPU project. From my understanding the software tool for A1SH is GX Developer and for R02 CPU is GX Works 3. Is there a way to convert the project or i need to do a new one and adapt it? Thank you.- 1 reply
-
- iq-r series
- gx works 3
-
(and 4 more)
Tagged with:
-
If you learn more quickly after watching videos about PLC like reading the literature without example, then these videos can help you if you are a complete beginner. Enjoy it (If this is against the rules of this site then sorry for spam ) PLC: 1. How to create project in TIA Portal https://www.youtube.com/playlist?list=PLqYtPgi-xbbgUBs7nrNmq5ManYyQ-hvKK 2. Program blocks https://www.youtube.com/playlist?list=PLqYtPgi-xbbhlni7Uw9-lfs8UIykpuubF 3. Bit logic operations https://www.youtube.com/playlist?list=PLqYtPgi-xbbitdaKvFJv9WZEOj7VrMf_0 4. Timer operations https://www.youtube.com/playlist?list=PLqYtPgi-xbbiaWQL8lXja1_Kd1z-jeDXr 5. Counter operations https://www.youtube.com/playlist?list=PLqYtPgi-xbbgfyg2dwDiR7xzsaXtdI9xo 6. Comparator operations https://www.youtube.com/playlist?list=PLqYtPgi-xbbgs-WgOvePyRUKgnDBK-qfx 7. Math operations https://www.youtube.com/playlist?list=PLqYtPgi-xbbgInRxxraaX6RG5LUS8gcpM 8. Move operations https://www.youtube.com/playlist?list=PLqYtPgi-xbbjQQEXr_bhzjKvNCjBeS1Zw 9. Conversion operations https://www.youtube.com/playlist?list=PLqYtPgi-xbbjsjfMUtVn3QQ6MJM7cBpTW 10. Program control operations https://www.youtube.com/playlist?list=PLqYtPgi-xbbgFtnxDkNZ7Amps67nr-KHX 11. Word logic operations https://www.youtube.com/playlist?list=PLqYtPgi-xbbh6bGa9bgy6cJhVi-RhF0gH 12. Shift and rotate instructions https://www.youtube.com/playlist?list=PLqYtPgi-xbbhlUnK9ECCKUccqt91Qsw6e HMI: 1. Beginning with HMI devices https://youtu.be/EF4Qprf0Mn8 2. Basic work with screens https://www.youtube.com/playlist?list=PLqYtPgi-xbbgPAApJCAGcPZOHViTAT9C1 3. Basic screen objects 4. Elements objects https://www.youtube.com/playlist?list=PLqYtPgi-xbbgOSznFb03Rr_St-2WFcygo 5. HMI Alarms https://www.youtube.com/playlist?list=PLqYtPgi-xbbi_V7XENgupV7HFjOJI7Yes 6. User administration https://www.youtube.com/playlist?list=PLqYtPgi-xbbgDP9dfAOkW3eodC5aH0kmR 7. Scheduled tasks https://www.youtube.com/playlist?list=PLqYtPgi-xbbjsaMlovHL2BDrju8kKgkZi OTHER: Siemens PLC - Hardware configuration (SIMATIC S7-300) https://youtu.be/WVkAGKsxftw Siemens HMI/PLC - communication (Basic Example) https://youtu.be/AcN50TShHgY Siemens PLC - Firmware upgrade/downgrade via TIA Portal https://youtu.be/qEsS7RR7QIw Siemens HMI/PLC - Recipes (Basic Example 1/2) https://youtu.be/wLmH-QT3T9U Siemens HMI/PLC - Recipes (Basic Example 2/2) https://youtu.be/_2K6l7dYuqY Siemens PLC - Upload program from PLC to TIA portal (PC) https://youtu.be/igw-4CxjnLw Siemens PLC - Add and install GSD file in TIA Portal https://youtu.be/LJKUzv3Zykw Siemens PLC - Activate and work with Web Server in TIA Portal (Part 1/2) https://youtu.be/WCpiej4S8-U Siemens PLC - Activate and work with Web Server in TIA Portal (Part 2/2) https://youtu.be/xl4pxLK0CDY Siemens PLC - Scaling/Converting Analog Input/Output (0-20mA to 4-20mA and vice versa) https://youtu.be/BOjFlhAwO0k Siemens HMI/PLC - Linear scaling of HMI Tag (PLC/HMI tag scaling) https://youtu.be/XBUknb3JDfE Siemens HMI - Changing of Date/Time format (12/24 hours format) https://youtu.be/bCVKFrLwzWA Siemens PLC - Configuring and commissioning of SIRIUS ACT (PROFINET IO) https://youtu.be/yIW6kta34_s and more...
- 70 replies
-
7
-
- tia
- tia portal
- (and 9 more)
-
As I follow the instructions as shown on the instuction leaflet 82A1043-PM01-A1 The whole proces stuck at step 15. leds are blinking "waiting to receive new firmware" but ftp command "put"... fails reason: "no connection with host" Does someone has experience with this firmware updates? regards John
-
Recently had to get a program out of a millenium 3 plc which I had programmed a few years ago but the cable would not connect.The only difference this time ,as my laptop no longer had a rs232 port,was the use of a USB to rs232 converter. Having trawled the web I managed to find the circuit of the interface cable below. It looks like the signal from the computer uses the negative going part of the pulses which aren't present on most usb to rs232 converters. Is this correct?
-
Hi all I need to view a project in instruction list format on Mitsubishi GX Works 2. On GX developer the shortcut is Alt + F1 or View tab then press instruction list. Thanks
- 2 replies
-
- gx works 2
- instruction list
-
(and 1 more)
Tagged with:
-
there is a device in the program (main) that is outside of the range
techsupoortalpha posted a topic in Mitsubishi
Hello, Good Day All. I am facing this issue while I am going to copy old plc to new plc. but old plc having 4965 steps, once going execute this program to new plc its showing more than 8000 steps. please suggest on this. PFA. -
Hello, I downloaded the program from the M251 PLC program, using the SoMachine4.3 environment. However, the downloaded program does not compile because the library is missing. The library is from a different manufacturer. Is it possible to find this library on the M251 PLC device? is there any way?
-
Hello. I start learn GXW3 and i have problem with simulation. I trying to connect GT Simulator with GX simulator 3, but it's doesn't work. GT Simulator 3 easy connecting with GX Simulator and GX Simulator 2 and it's working. So i can't say that problem in GT Simulator 3, but GX Simulator 3 works too, when i starting it. All software configurated without any errors (IQW,GTW3,GXW3). I using GX Works3 1.026C, GT Designer3 1.151H, IQ works (melsoft navigator) 2.12N. All time when trying to connect, popups this msg. Settings of GTS3 Note from HELP. Does someone know how fix this problem?
- 3 replies
-
- gx simulator 3
- gt simulator 3
-
(and 2 more)
Tagged with:
-
Hey guys I am strugeling with how to code a autotune algorithm in Gx Works 2 structured text. Does someone have any useful information or code to lend me, this is for a school project please help
-
Hello PLCmaniaccccssss, What is the unit of time in 'average time for the channel -1' (D8284) while programming for analog inputs? I have moved k10 to D8284 in my program in gxworks 2, does that mean the time average will be taken for 1Sec or 10msec or any other time unit??? I require this to eliminate the flickering of the input from the load cell transmitter. Thanks and God bless!!!
-
- d8284
- gx works 2
-
(and 1 more)
Tagged with:
-
I am probably over looking something simple but I am stuck. I need to count how many containers come down a conveyor and display it in Indusoft Web Studio 2020. I am using a CJ2M to count from a sensor doing an binary incremental long word (++L) Using long word as the count will need to go into the thousands. (not 100% if this is the correct way). My problem is after 99 the value sent to indusoft is not a number but letters or signs. I am sure their is a simple solution but I have given my self a headache and need a little guidance please.
-
Anyone you know any books,software or educational package to learn plc program at home Please??
-
Hello everyone, may you all bless with the best. Can anyone please help me on connecting and programming In Modbus rtu INVT CHF-100A vfd with FX2n having rs485-bd module. I want to connect 11 vfd and one fx2n plc also .
-
Hello everyone, may you all bless with the best. Can anyone please help me on connecting and programming In Modbus rtu INVT CHF-100A vfd with FX2n having rs485-bd module. I want to connect 11 vfd and one fx2n plc also
-
Hello everyone, I have a Panelview plus 600 ( I know it’s old but I’m trying to get it to work). It’s on a yogurt bucket filler, I don't have any application to run or to do anything. What software do I need on a computer to be able to transfer it to the panelview. Is this even possible? There is nothing in the memory right now but how to I program it and what program do I use? I’m in the Los Angeles area and even willing to pay for someone to come and do it. I need to get this to work, thank you so much.
-
Hello, GX Works 3 / R04CPU. I'm using the Device Memory so that I can link the HMI to my PLC. I've set aside some memory, in this case D3260, to be used as a Real (32 bits data, Float single precision) to be set by the HMI (operator adjustable setting) and read from the PLC. I thought I'd move D3260 into a local label for readability/testing purposes, and it says I cannot move an Int into a Real - which is fair enough, but, how/where do I set D3260 as a real? Do I use some Functions to take D3260 + D3261 and make it to a real, or define the data area as a real somewhere... Dumb question I know, I'm new to GX Works 3. Thanks very muchly
- 3 replies
-
1
-
- programming
- gx works 3
-
(and 1 more)
Tagged with:
-
HELLO EVERYONE I am having problem writing in A1S68AD program, please help me out. My system configuration is as :- 1. A1S POWER SUPPLY 2. A2SHCPU 3. A1SJ71AT21B 4. A1S68AD 5. A1S62DA 6. A1SX81-S2 7. A1SX81-S2 8. A1SX81-S2 9. A1SY10 10. A1SY10 11. A1SY10 12. A1SX80-S2 13. A1SX80-S2 14. A1SY10 This is my existing configuration. But now there is one more slot empty and now i want to add one A1S68AD CARD in the empty slot, i tried writing the program for this card, but plc gives me error. SO, anyone can send me the program with addresses for this card. It will be very helpful as I am new to this A series Mitsubishi PLC. AND HERE BELOW IS THE ATTACHED EXISTING PLC PROGRAM AND SYSTEM IMAGES. PLC PROGRAM.zip
-
Mitsubishi 2400 File set error Q2ASH point step / parameter 1100
rtfmpliz posted a topic in Mitsubishi
Hello to all We have a problem with starting CPU. In GX Developer we click "Diagnostics" and see Error 2400 File set Error. What causes this error? Error code list[Error code 2400] and point to step / parameter 1100 we already have format the memory the last thing not tried yet is : - swap the CPU , (still in process provide by purchasing) - change memory battery (as per suggest by machine vendor) kindly needs some suggestion if anyone experienced this problem, or maybe some tips Applicable machine QnA series PLC ===================================================================================== Error code(SD0) 2400 Error message FILE SET ERROR LED status(RUN) OFF LED status(ERROR) Flashing PLC operating state Stop Diagnostics timing At power ON & reset [FILE SET ERROR] The file specified with a parameter does not exist. ■ Collateral information • Common information: File name/Drive name • Individual information: Parameter number ■ Diagnostic Timing • At power-on/At reset/At writing to programmable controller/STOPRUN Read the individual information of the error using the programming tool to identify the numeric value (parameter No.). Check the drive name and file name of the parameter corresponding to the value, and correct it as necessary. Create the specified file and write it to the CPU module.- 4 replies
-
- q2ash
- error 2400
-
(and 1 more)
Tagged with:
-
I am trying to online edit a program in a MELSEC QCPU, using GX Works2, but I keep getting this error "A file which does not exist in the PLC was specified" <ES:010a4022> Few weeks ago I had just online edited the same program in the same PLC with the same steps with no problem. There had been no changes to the PLC after that. Just all a sudden when I try to edit yesterday I get this error. Not an expert in Mitsubishi, just started learning the basics. Connection to PLC is by USB cable. Steps I followed to connect to PLC: -Online > Read from PLC -Select PLC Series: QCPU (Q mode) -Select PLC side I/F Serial Setting: Serial USB -Select all target program to Read, then Execute I am editing the file that I had just read from PLC Steps I followed to online edit: -Online > Monitor > Monitor (Write mode) -Execute the function below when mode is changed: Checked all -Edit the program (basically just deleted one -||- contact and drew back the line) -Compile > Online Program Change Then Bam! error get! "A file which does not exist in the PLC was specified" <ES:010a4022> I had tried Verify with PLC, but all results match. Is there something I am missing? Help much appreciated!
-
- mitsubishi
- plc
- (and 6 more)
-
Hi fellow PLC veterans, I am new in the PLC world so please forgive me if my questions read dumb to you.. I am just wondering if there are any newer PLC machines that can: 1. keep the program even after its battery is completely flat or faulty (Is this even possible?) 2. allow users to copy and save the program somewhere so one can install the program again without the need/presence of the machine supplier What tools/software may be required? Thank you for reading and look forward to your response :)
-
Hello, I am started working on Gx Works 3 recently, actually want to know if I can access local labels from other program body or can call them to other program body?