Search the Community

Showing results for tags 'gx works program step count'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 131 results

  1.   Hello, I downloaded the program from the M251 PLC program, using the SoMachine4.3 environment. However, the downloaded program does not compile because the library is missing. The library is from a different manufacturer. Is it possible to find this library on the M251 PLC device? is there any way?
  2. Subtraction with GX Works 3

    Hi guys, I have a problem in a FB of GX Works 3, I am trying to do a subtraction of two variables that have Double Words Signed as type. These two variables increment, the second variable is lower than the first, but the result is always high and this is strange. So there is an error I have not understood, who can help me?  
  3. Hello. I start learn GXW3  and i have problem with simulation. I trying to connect GT Simulator with GX simulator 3, but it's doesn't work. GT Simulator 3 easy connecting with GX Simulator and GX Simulator 2 and it's working. So i can't say that problem in GT Simulator 3, but GX Simulator 3 works too, when i starting it. All software configurated without any errors (IQW,GTW3,GXW3). I using GX Works3 1.026C, GT Designer3 1.151H, IQ works (melsoft navigator) 2.12N.   All time when trying to connect, popups this msg. Settings of GTS3 Note from HELP. Does someone know how fix this problem?  
  4. PID Autotune ST

    Hey guys I am strugeling with how to code a autotune algorithm in Gx Works 2 structured text. Does someone have any useful information or code to lend me, this is for a school project please help
  5. unit of time in D8284

    Hello PLCmaniaccccssss, What is the unit of time in 'average time for the channel -1' (D8284) while programming for analog inputs? I have moved k10 to D8284 in my program in gxworks 2, does that mean the time average will be taken for 1Sec or 10msec or any other time unit??? I require this to eliminate the flickering of the input from the load cell transmitter. Thanks and God bless!!!
  6. Need a little help

    I am probably over looking something simple but I am stuck. I need to count how many containers come down a conveyor and display it in Indusoft Web Studio 2020. I am using a CJ2M to count from a sensor doing an binary incremental long word (++L) Using long word as the count will need to go into the thousands. (not 100% if this is the correct way). My problem is after 99 the value sent to indusoft is not a number but letters or signs. I am sure their is a simple solution but I have given my self a headache and need a little guidance please. 
  7. TIA Portal for beginners

    If you learn more quickly after watching videos about PLC like reading the literature without example, then these videos can help you if you are a complete beginner. Enjoy it  (If this is against the rules of this site then sorry for spam  )   PLC:   1. How to create project in TIA Portal   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgUBs7nrNmq5ManYyQ-hvKK       2. Program blocks   https://www.youtube.com/playlist?list=PLqYtPgi-xbbhlni7Uw9-lfs8UIykpuubF       3. Bit logic operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbitdaKvFJv9WZEOj7VrMf_0       4. Timer operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbiaWQL8lXja1_Kd1z-jeDXr       5. Counter operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgfyg2dwDiR7xzsaXtdI9xo       6. Comparator operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgs-WgOvePyRUKgnDBK-qfx       7. Math operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgInRxxraaX6RG5LUS8gcpM       8. Move operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbjQQEXr_bhzjKvNCjBeS1Zw       9. Conversion operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbjsjfMUtVn3QQ6MJM7cBpTW       10. Program control operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgFtnxDkNZ7Amps67nr-KHX       11. Word logic operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbh6bGa9bgy6cJhVi-RhF0gH       12. Shift and rotate instructions   https://www.youtube.com/playlist?list=PLqYtPgi-xbbhlUnK9ECCKUccqt91Qsw6e   HMI:   1.       Beginning with HMI devices   https://youtu.be/EF4Qprf0Mn8   2.       Basic work with screens   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgPAApJCAGcPZOHViTAT9C1   3.       Basic screen objects           4.    Elements objects   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgOSznFb03Rr_St-2WFcygo         5.       HMI Alarms   https://www.youtube.com/playlist?list=PLqYtPgi-xbbi_V7XENgupV7HFjOJI7Yes   6.       User administration   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgDP9dfAOkW3eodC5aH0kmR         7.       Scheduled tasks   https://www.youtube.com/playlist?list=PLqYtPgi-xbbjsaMlovHL2BDrju8kKgkZi     OTHER: Siemens PLC - Hardware configuration (SIMATIC S7-300) https://youtu.be/WVkAGKsxftw     Siemens HMI/PLC - communication (Basic Example) https://youtu.be/AcN50TShHgY   Siemens PLC - Firmware upgrade/downgrade via TIA Portal https://youtu.be/qEsS7RR7QIw   Siemens HMI/PLC - Recipes (Basic Example 1/2) https://youtu.be/wLmH-QT3T9U   Siemens HMI/PLC - Recipes (Basic Example 2/2) https://youtu.be/_2K6l7dYuqY   Siemens PLC - Upload program from PLC to TIA portal (PC) https://youtu.be/igw-4CxjnLw   Siemens PLC - Add and install GSD file in TIA Portal https://youtu.be/LJKUzv3Zykw   Siemens PLC - Activate and work with Web Server in TIA Portal (Part 1/2) https://youtu.be/WCpiej4S8-U   Siemens PLC - Activate and work with Web Server in TIA Portal (Part 2/2) https://youtu.be/xl4pxLK0CDY   Siemens PLC - Scaling/Converting Analog Input/Output (0-20mA to 4-20mA and vice versa) https://youtu.be/BOjFlhAwO0k   Siemens HMI/PLC - Linear scaling of HMI Tag (PLC/HMI tag scaling) https://youtu.be/XBUknb3JDfE   Siemens HMI - Changing of Date/Time format (12/24 hours format) https://youtu.be/bCVKFrLwzWA   Siemens PLC - Configuring and commissioning of SIRIUS ACT (PROFINET IO) https://youtu.be/yIW6kta34_s   and more...      
  8. Anyone you know any books,software or educational package to learn plc program at home Please??  
  9. Mitsubishi Fx2n Modbus rtu vfd

    Hello everyone, may you all bless with the best. Can anyone please help me on connecting and programming In Modbus rtu INVT CHF-100A vfd with FX2n having rs485-bd module. I want to connect 11 vfd and one fx2n plc also .
  10. Mitsubishi Fx2n Modbus rtu vfd

    Hello everyone, may you all bless with the best. Can anyone please help me on connecting and programming In Modbus rtu INVT CHF-100A vfd with FX2n having rs485-bd module. I want to connect 11 vfd and one fx2n plc also 
  11. Hello everyone,  I have a Panelview plus 600 ( I know it’s old but I’m trying to get it to work). It’s on a yogurt bucket filler, I don't have any application to run or to do anything. What software do I need on a computer to be able to transfer it to the panelview. Is this even possible?  There is nothing in the memory right now but how to I program it and what program do I use?  I’m in the Los Angeles area and even willing to pay for someone to come and do it.  I need to get this to work, thank you so much. 
  12. GX Works 3 (R04CPU) Device Memory

    Hello,  GX Works 3 / R04CPU. I'm using the Device Memory so that I can link the HMI to my PLC. I've set aside some memory, in this case D3260, to be used as a Real (32 bits data, Float single precision) to be set by the HMI (operator adjustable setting) and read from the PLC. I thought I'd move D3260 into a local label for readability/testing purposes, and it says I cannot move an Int into a Real - which is fair enough, but, how/where do I set D3260 as a real? Do I use some Functions to take D3260 + D3261 and make it to a real, or define the data area as a real somewhere...   Dumb question I know, I'm new to GX Works 3. Thanks very muchly    
  13. MITSUBISHI A1S68AD PROGRAM

    HELLO EVERYONE I am having problem writing in A1S68AD program, please help me out. My system configuration is as :- 1. A1S POWER SUPPLY   2. A2SHCPU   3. A1SJ71AT21B    4. A1S68AD  5. A1S62DA  6. A1SX81-S2 7.  A1SX81-S2  8. A1SX81-S2  9. A1SY10  10. A1SY10  11. A1SY10  12. A1SX80-S2  13. A1SX80-S2 14. A1SY10  This is my existing configuration. But now there is one more slot empty and now i want to add one A1S68AD CARD in the empty slot, i tried writing the program for this card, but plc gives me error. SO, anyone can send me the program with addresses for this card. It will be very helpful as I am new to this A series Mitsubishi PLC. AND HERE BELOW IS THE ATTACHED EXISTING PLC PROGRAM AND SYSTEM IMAGES. PLC PROGRAM.zip
  14. Hello to all  We have a problem with starting CPU. In GX Developer we click "Diagnostics" and see Error 2400 File set Error. What causes this error? Error code list[Error code 2400] and point to step / parameter 1100 we already have format the memory the last thing not tried yet is :  - swap the CPU , (still in process provide by purchasing) - change memory battery (as per suggest by machine vendor) kindly needs some suggestion if anyone experienced this problem, or maybe some tips    Applicable machine    QnA series PLC ===================================================================================== Error code(SD0)    2400 Error message    FILE SET ERROR LED status(RUN)    OFF LED status(ERROR)    Flashing PLC operating state    Stop Diagnostics timing    At power ON & reset [FILE SET ERROR] The file specified with a parameter does not exist. ■ Collateral information • Common information: File name/Drive name • Individual information: Parameter number ■ Diagnostic Timing • At power-on/At reset/At writing to programmable controller/STOPRUN Read the individual information of the error using the programming tool to identify the numeric value (parameter No.). Check the drive name and file name of the parameter corresponding to the value, and correct it as necessary. Create the specified file and write it to the CPU module.
  15. I am trying to online edit a program in a MELSEC QCPU, using GX Works2, but I keep getting this error "A file which does not exist in the PLC was specified" <ES:010a4022> Few weeks ago I had just online edited the same program in the same PLC with the same steps with no problem. There had been no changes to the PLC after that. Just all a sudden when I try to edit yesterday I get this error. Not an expert in Mitsubishi, just started learning the basics. Connection to PLC is by USB cable. Steps I followed to connect to PLC:    -Online > Read from PLC    -Select PLC Series: QCPU (Q mode)    -Select PLC side I/F Serial Setting: Serial USB    -Select all target program to Read, then Execute I am editing the file that I had just read from PLC Steps I followed to online edit:    -Online > Monitor > Monitor (Write mode)    -Execute the function below when mode is changed: Checked all    -Edit the program (basically just deleted one -||- contact and drew back the line)    -Compile > Online Program Change Then Bam! error get! "A file which does not exist in the PLC was specified" <ES:010a4022> I had tried Verify with PLC, but all results match. Is there something I am missing? Help much appreciated!
  16. Hi fellow PLC veterans, I am new in the PLC world so please forgive me if my questions read dumb to you..   I am just wondering if there are any newer PLC machines that can: 1. keep the program even after its battery is completely flat or faulty  (Is this even possible?) 2. allow users to copy and save the program somewhere so one can install the program again without the need/presence of the machine supplier What tools/software may be required?   Thank you for reading and look forward to your response :)
  17. Hello, I am started working on Gx Works 3 recently, actually want to know if I can access local labels from other program body or can call them to other program body?
  18. Unconverted Ladder Code?

    Hi All, Please see attached screenshot: Whenever I want to save the ladder program or start simulation, this window pops-up. If I press 'yes' I loose the whole work. I tried to open existing program and modify it, but it did the same. When I clicked 'yes' I lost all modification and just the original program remained. (I made the program in the morning, opened and saved many times but it started popping this window later.) I work with FXCPU series, FX3U/FX3UC type, simple project in ladder. This worked well but now is not anymore. I use Melsoft GX Simulator! Can anyone advise why this is happening? It is very annoying! It is pointless to work on anything now! Many thanks
  19. I believe that conversion is possible, but have no idea how?
  20. I have an analog output card 1734-OE2V and there is in the fault/actions page parameters for program mode. What is program mode and when it is activated? Fault mode is clear but... Program should be written the value, but when this happens?
  21. GX WORKS 2 with MX component

    I'm trying to simulate the proface HMI and my ladder program using the MX component " communication setup utility". I followed all the steps on a tutorial vid however an error pops'up (check the attached file). i was wondering if you can help. Thanks in advance.
  22. Pumps controlled with counter

    I need som help and suggestion how i can control 2 pumps that shall go 10 times each?i have 2 level sensors that is giving it the start and stop,and pump1 shall start 10 times,then pump2 shall start 10 times.Can i use CNT and how is the best smooth way to do it?   thx
  23. Hello Im trying to read from my PLC but i cannot see the program file.  However, if i try to compare it using other file program, i could see the program file. Is their any restriction in my software?
  24. Sysmac Studio

    Hello ,  Is my frist project on Omron and also on Sysmac Studio .  I have one PLC NX1P2 - 9024DT1 I write a sample program on ST with internal variable ( struct ) but i receive an information that i dont have permition to write on Var  Ps.  I can uploaded file with image   
  25. GX Works ARRAY usage

    Hi ALL! Do not compile project on GX Works: Type mismatch? But type is match!!! Equivalent project on Delta ISPSoft compile OK: What wrong?