Search the Community

Showing results for tags 'gt2310 communication problem'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 178 results

  1. NB Designer V1.4

    I found NB Designer really struggled running on Windoze 10 Pro x 64 bit - bloody painful to be honest - on both the massively fast desktop and very fast laptop - no time to wait around - likes my horse power. Selected it to run in Windows 7 compatibility mode - way better - quite nippy actually. Highly recommended - it appears the NB Designer team may have not quite caught up with the latest Windoze OS.
  2. Serial communication of Micro830

    hello everyone, I'm trying to connect PC with Micro830 with RS232 cable for transfer serial data. However, the PLC can not receive the character from PC. I used ARD function block to read the characters from PC.  there is no error and the output of ARD function block is 0 when I debug ladder programme. the serial communication state LED illuminated once I send a character from PC to PLC. the channel of input is 2 which is the embedded serial port. I use an adapter from USB to RS232. Email:      
  3. Good day  I require some assistance with the configuration setup (GX Works 3) for FX5u PLC inter-communication (PLC to PLC), over Ethernet (using the built-in Ethernet port). The purpose of the inter-connection is data exchange. (Values stored within the PLC storage registers such as words and bits).  Does anyone perhaps support files on this such as a procedure or example? Thanks
  4. Hello,    I have a Cognex insight 5100 camera connected to Allen Bradley L62 processor. The is working fine since the last year but sometimes the I/O module faults out with error code 16#0022. I looked online it look it needed a Ethernet cable change ( I did that but no results).  Then I looked at the firmware in the I/O module and firmware in the camera and I found a difference. The firmware in the camera is 4.06 and the firmware of I/O module in the PLC is 4.005. Can anyone help me resolve the communication issue ? I want to know how to downgrade the camera firmware or change the revision in the PLC ( which I cannot )    Thanks in Advance 
  5. Hello,    I have a Cognex insight 5100 camera connected to Allen Bradley L62 processor. The is working fine since the last year but sometimes the I/O module faults out with error code 16#0022. I looked online it look it needed a Ethernet cable change ( I did that but no results).  Then I looked at the firmware in the I/O module and firmware in the camera and I found a difference. The firmware in the camera is 4.06 and the firmware of I/O module in the PLC is 4.005. Can anyone help me resolve the communication issue ? I want to know how to downgrade the camera firmware or change the revision in the PLC ( which I cannot )    Thanks in Advance 
  6. Good afternoon fellow members,I once again ask for your help to know if any of you have struggled with similar issues. For the past year and a half, Every 1-2 months we seem to be losing communication with one of our PLC's/racks. We have in the rack a 1756-EN2T card (revision 3.006) that will flash as if it is communicating and status OK (green LED), yet we will be unable to ping it and our operator interfaces go into error. We could also not open the web browser page of the EN2T card, nor connect to the PLC/rack through RSLogix5000. As this happened over the weekend, the local electrician was called and he tried cycling power to the rack and there was no change after it came back on (not sure how long he left power off to the rack though). The problem seemed to be fixed after we told him to pull the EN2T card out of its slot and then re-insert it.We verified the CIP cinnections for this card and it is around 98 to 101 CIP connections out of a max of 248, so not too high. the card's CPU usage is 24-29%, so no indication of problems there. EN2T Card is set to auto-negociate, just like all the other cards we use at all of our plants. Has anyone ever experienced a similar problem?Thank you in advance for all your help and knowledge-sharing!
  7. Hi, I have the following configuration where 4 PLC panels, with each having a Q12PH CPU and QJ71E71-100 module. All these QJ71E71-100 are connected to a HUB using straight cable. From the HUB one connection is going to an I-Fix SCADA which is already communicating with all 4 PLCs using MC protocol. I want to send data from 3 of this PLCs to the 4th PLC in the same network using fixed buffer communication. Can anyone provide a sample program for the same. Send and Receive side. I am using GX Works 2 for programming. Your help is very much appreciated.
  8. delta hmi communication speed

    Hello, i have DOP-07s411 delta hmi and i want to interface it with microcontroller using modbus (RTU) protocol over RS485( 8 bit data,1 stop bit, parity none,19200 baud rate). i have good speed of communication if i do not use macros. But as i place background macro(background macro is only 4 lines ) it slow down and  updates the display at every 3 seconds. i cant able to figure out what is the problem. I want to update display of  HMI very fast.Please help me to troubleshoot the problem.
  9. Hi,  I'm trying to test the serial communications with my Micro820. I acquired a 2080-SERIALISOL so I could have "someone" to talk to. I want to use RS485, so I figured that I'd have to connect: Modbus pin 1 (D+) to serialisol pin A1 (+485) Modbus pin 2 (D-) to serialisol pin B4 (-485) Modbus pin 3 (GND) to serialisol pin A2 (GND) Now when it comes to CCW, the thing gets a little harder. I know I need to use the MSG_MODBUS block (in fact I need 2, one for the modbus and another one for the serialisol), and I guess I specify the interface I'm using on the TargetCfg field (data type MODBUSTARPARA). But how do I figure out that the Addr (UDINT) and Node (USINT) values are for my Modbus and Serialisol? Or am I doing it wrong? Does anybody know of any place where I can get some more guidance or even a funcional ladder program? Thank you in advance
  10. Mitsubishi communication error

    Dear all,   I have Mitsubishi FX1S Series PLC while i am downloading program , i am not able to do it and i am getting error. please find attached image and please help me to solve it.
  11. Hello,  I am a newbie to the Omron world. We have a new machine come in made on Omron PLC, we are trying to get it connected to our OPC server so that the server can read and write tags via ther Ethernet/IP protocol. We have given out ethernet card IP and the NJ501-1300 controller is on But still our OPC server cannot see the tags/variables. I dunno if we have to add the ethernet communication card to the network configurator and add the tag sets ?  We are also getting a tag resolution error on sysmac studio while being online.    Thanks Pratik 
  12. L3 Serial Communication

    Hello,   I am looking for examples on using serial communication with a WMS inside Studio 5000.  Sample programs would be ideal. And I would like to get some information on what blocks need to be used. e.g. Send, and Receive   Thanks!
  13. Master/Slave Communication

    Hello guys, I am using Fatek PLC's to communicate with each other as a Master & Slave through zigbee which is connected through RS485. And I succeed. But the issue is that I have to communicate each other at a distance of about 2km where zigbee out of range to each other. I am bit confused here; 1) whether I use RF booster? Does it work? 2) Should I introduce extra PLC as a repeater between master slave? But this(extra added) PLC repeater also become as a master(Master Repeater).or any idea? Most important I can using Fatek Protocol or Modbus RTU or Modbus ASCII prootcol.
  14. FX3U For GXworks2 and WinCC Flex

    Hi, Is there any way in order to monitor both PLC(GXworks2) and HMI(WinCCFlex) using only 1 port from the PLC(FX3U)? I have tried it but I'm not able to communicate the other application(one at a time only).   Thanks!
  15. S7-300

    Has anyone ever use a Allen Bradley 9300-ENA card with a Siemens S7-300?
  16. Hello, I am currently installing a PLC control panel and due to space constraints, we will need to install the Panelview 600 HMI separate from the Micrologix. We purchased a 50ft Allen Bradley communication cable, but 50ft will not be long enough. We have about 70 to 75ft of conduit between the panel and the HMI. I would like to know what options we have for this connection. I read that for serial connection, we shouldn't go past 50ft. I understand the Micrologix 1100 has an ethernet connection and the Panelview does as well, but I'm not sure what changes would be needed in order to communicate through the ethernet port, instead of the RS-232 port. Any suggestions will be greatly appreciated.   Thanks, JCG
  17. GE PLC PCM

    The topic is based on "How to configure a PCM module in GE PLC". One new query in PCM. To configure this PCM Module some procedure is to be followed in CMD prompt. Initially once ''READY'' line displayed. Query to this topic is if ''READY'' line repeats below persistently in CMD prompt, then solution is ______???? 
  18. Hi again I browse through half a dozen mitsubishi manuals but turn up nothing for mitsubishi plc cross-communication. In this project there are about six L-06 plc:s. All are on the same ethernet network already, communicating nicely with the SCADA system. Per today information is (temporarily) exchanged via the SCADA system. Here is another hole in my knowledge. Namely how to correctly setup communication between these plc:s. I plan to continuosly exchange some 50 bytes of information. I would be grateful for some pointers and/or perhaps a reference to a manual. Cheers to all of you //
  19. tec

    good day to every body im trying to replace old tuche screen [omron nt20s-st121-v1] to new one [[omron nt20s-st121b-v3]  thay look  indentical and the manuel  show they replacabel] i use nt tool software that i install from cx0ne file . i  upload the data and screen grafix from the old one and i see it on my pc . but i cant download it the the new one,,   i see masege on the pc: [dowload aborted  please refer to error log] the error log write many error like:: memory utillization has exceededthe 96,00 kbyteslimit by73.68kbytes small aplication that i wrote just for cheaking go well and download  i wonder maybe it the nt tool but all the other aplication from that disk cxone work good [plc + hmi +servo ] i hope someone  help mordehay 
  20. PLC won't connect with PC

    Dear sir, My problem is I connected with PLC with cable and uploaded the program and it's working nice, but when I removed my cable and connected the monitor panel it have communication error, I connect my PC again it won't see the PLC, the PLC functions I/O is work but I can't connect with PC or monitor panel.  So if their any reset for communication port or the port is damage?  
  21. Hi All. I have AB PLC Micrologix 1500 and HMI PV600. In factoryTalkView ME I have installed RSLinx Enterprise and I have setup communication setting I have created one shortcut like PLC1 linked it to PLC ML1500 which I can see in right side of setting pan. I copied these settings to Runtime target. Now while giving animation in screen e.g. colour, I am trying to browse tag but it's not showing anything in online folder. I clicked show all server, refreshed all folders and restarted RSLinks Enterprise service also but still can not find tags. I ran runtime on PC using OPC created in RSLinx Classic, Its working fine, I can browse tags. But it's not working while I download it in HMI as I can see in HMI configuration network and comm setting there is only RSLinx Enterprise is available. Please suggest me solution on this issue.
  22. We are communicating FX3GE PLC with Vijeo Citect SCADA. We tried various protocols such as MelsecNET, MelsecFX2N, Melsec1, etc. If you know how please help.
  23. Hi. I'm hoping someone can give me an answer on this problem I'm having with a FX3GE PLC. I am trying to get a FX3GE plc to communicate to a drive over RS485 using a FX3G-485-BD card. In GXworks2. But am having no luck.  I have tried changing the PLC communication settings in PLC parameters between CH1 and CH2, But am unable to get any communication working on the front port. I have also tested with a FX3G-232-BD RS232 card and have the same problems. There is no activity on the SD RD led's and no data being sent. If I put the FX3G-485-BD card in a FX3G or FX3S PLC I have running the same code it works fine. So the problem I'm having is with the FX3GE PLC Please can someone tell me what the difference is with the front Communication port on the FX3G and the FX3GE. And how I can get the FX3G-485-BD card working on the FX3GE PLC. Thanks
  24. Hello,     I am working in microprocessor industries, now I am doing reverse engineering for PPC SECS communication program in Visual C++ 6.0 for Mitsubishi PLC(Model Q50UDEHCPU). Did anyone from you have worked with this program PPC? I need to find out the what are doing each function from this program? Like hostproc, data, mainproc, otherproc, plcproc, qbproc queue, offline, send_c, QBFFunc32.
  25. Hi, I can't add this CP1W AD041 analog module to mi PLC CP1H