Search the Community
Showing results for tags 'gt designer3 got2000 1.156n'.
Found 35 results
-
Hello Everyone, I have a GOT200 where im using a single Faceplate for 9 inverters in my channel 2, and in my channel 1 I got 3 PLCs, I try to use the Switching Station Function only for the channel 2 in a buttton, my problem is that I can only connect to 1 inverter , when I press the buton the switching station device value changes, but it remains in the same inwerter which is the Host, can someone give me a light on this? thank you in advance
-
Hello Everyone, I have a GOT200 where im using a single Faceplate for 9 inverters in my channel 2, and in my channel 1 I got 3 PLCs, I try to use the Switching Station Function only for the channel 2 in a buttton, my problem is that I can only connect to 1 inverter , when I press the buton the switching station device value changes, but it remains in the same inwerter which is the Host, can someone give me a light on this? thank you in advance
-
Hi guys, Is it possible to convert integers to/from strings in scripts in GT Designer3? I don't want to perform the conversion in the PLC. Thanks,
- 1 reply
-
- gt designer3
- script
-
(and 2 more)
Tagged with:
-
Hey all. I'm adding some numeric inputs to an HMI screen (using GT Designer3). Is there a way to create min and max limits to the values that can be entered into the numeric input?
-
How to connect and simulate with MELSEC FX5U and hmi panel GOT2000 GT2104-pmbd
Puntigamer posted a topic in Mitsubishi
Hello! I'm learning how to use mitsubishi MELSEC fx5u-32mr-es and an hmi panel mitsubishi electric got2000 model GT2104-PMBD. I have no trouble programming the PLC and also I managed to display a layout on the hmi but I ran into trouble with: How to connect the PLC and hmi directly via ethernet. I tried to connect them but the hmi says there is a comm error. How to run a simulation using gt simulator. I made a program in gx works 3 and a design in gt designer 3, started to simulate but it says that the PLC type of the project is different from setting gt simulator 3. I checked the gt designer there I selected the PLC model FX, which as the only logical choice and in gx works I use the correct PLC/CPU (fx5u) so I'm kinda in a blind spot. I hope someone out there can help me troubleshoot this problem since i need it in order to compete on a national level. Best Regards. -
Hi, Could anyone please help me to set a Counter SetValue on Omron CP1L PLC from Got2103 HMI. The Device register on Got2103 doesnt take registers such as D0, it takes DM0. But the 'CNT 001 DM0' instruction doesnt work in Omron PLC. So what should be the Device address on HMI and Counter Set Value register. I am new to both Omron and Mitsi Thank you
-
Hello, I am trying to create new pages on a pre-existing GOT. Within the GOT there is a screen that displays a list of part numbers to be selected. Like the image below; As of current, there are 10 pages with 10 part numbers in each page (Total = 100 part#). I want to create one more page for 10 more part numbers but I can't figure out how the pre-existing logic switches from page to another within the screen or how I would add more page to the GOT screen? Below is the ladder logic of how the screen switches from one page to another.
-
Hello everybody, I am facing an issue with my GOT HMIs Performance at the Moment. I hope somebody can assist me troubleshooting these performance issues. I am using GOT2310 and GT2107 simple. The performance issues are in different projects. When I am talking about performance issues I am specifically talking about a laggy behavior during operation of the GOT. I am looking for a way how to actually debug and troubleshoot the performance issue. How to figure out what is causing the laggy behavior? The 2310 HMI is actually quite busy I am doing quite some different things: DDTs are active Different loggings are active (one logging is logging every 100ms) Multiple layers Different scripts, some of the scripts are executed ordinary The screens are using multiple layers Access data directly not via a DDT I have a communication error, this error seems to be relatively unique and I will open a different topic for this. There is communication in both directions but I do get a system alarm “communication error” What is the good practice to start debugging / troubleshooting? Best regards
-
Hi guys, I have been trying to sync up my RSLogix 5000 tag to GT Designer 3 (GTD3) objects but I noticed that GTD3 only recognize certain native data types from Allen Bradley Logix5572 Controller (Model 1756-L72). In the documentation that I found, it show that certain AB Native Tags are transferable to GTD3 Data Type (See the attached file "AB Tags to GTD3 Tags" ) One of the User-Defined Data Type from the RSLogix 5000 that I am trying to sync to Text Display Object in GTD3 is called "UDT_MY_CLTR_INFO" here is it's hierarchy of inheritance from RSLogix 5000 Name Force Mask Data Type MY_CLTR_INFO (...) UDT_MY_CLTR_INFO MY_CLTR_INFO.NAME STRING MY_CLTR_INFO.NAME.LENGTH DINT MY_CLTR_INFO.NAME.DATA SINT[82] In my exported tag which is a CSV file, it doesn't list the sub-classes MY_CLTR_INFO.NAME, MY_CLTR_INFO.NAME.LENGTH, and MY_CLTR_INFO.NAME.DATA, it would only list MY_CLTR_INFO. How do I link up my "Text Display" Object in GTD3 with the tag "MY_CLTR_INFO.NAME" whose Data Type is STRING and GTD3 does not have a STRING Data Type? I appreciate anyone that took their time to read my problem and any attempt to help me out. Thank you.
-
HELP How can one implement scrolling text in GT Designer3 in GOT-2000? THANKS!!