Search the Community

Showing results for tags 'gt designer3 got2000 1.156n'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 28 results

  1. Hi! We have a GOT2000 HMI with a Q06UDVCPU system. During an investigation, I found that the address on the HMI (for example D10120) and the address in the PLC (D10020) are different. The value is the same, it appeared instantly during monitoring, but when I searched for it, didn't find it (I couldn't find the D10120 in GxWorks2, and couldn't find D10020 in GtDesigner3). The HMI's address is 100 higher. I never saw anything like that. Where is this difference can be set? Knowing this, I can navigate in the's just annoying.
  2. Structred Labels for Designer?

    Hello! It's my firt time with a Mitsubishi PLC/HMI. And while I at least think I know what I'm doing there (for now) wanted to ask for something "quality of life". It seems, that I can't import my Global Labels from GX Works2 to Designer3 if they are structred! (meaning, you have to go to "Detailed Settings" to set the Device). Of course I could it manually; but that would be quite some work... is there a better way to get the "device connection" in my HMI Labels? Or other ideas? Would love to hear them! greetings! PS: Don't know if important: PLC: MELSEC Q00UJ, HMI: MELSEC GS2107-WTBD-N
  3. Good morning experts, is there any way to create two different Alarm display (System)? So, one with collection mode historical and one with only current alarm? Many thanks in advance
  4. I would like to send ascii data  to other devices using RS232 interface. and the example format is "0009" (it is product counter machine marking). how can I do this? I am using q03ude, I usually convert 1001 to ascii using BINDA and use the last data (01). but, when it double word data e.g. : 100009 the last data is 9 and null, not 09 
  5. GOT Mobile 2000

    Hi. I have a problem with the communication GotMobile in GOT2000 This is the error (Photo). PLEASE HELP!!!
  6. GOT2000 as MODBUS TCP slave

    I have this setup: FX3G CPU connected to GT2103 through RS422 (CH1). GT2103's ethernet port connected to LAN and set up as modbus TCP slave (CH2). I want to read/write PLC word devices using a modbus TCP client, from a PC. The HMI is acting as a gateway between PLC and PC. I used the Device Data Transfer function to send PLC's D register values to GT's internal GD registers. D0....D9 ==>  GD0....GD9 After some tries, I get valid response from the modbus slave. Reading the holding registers 0....9 (40001....40009), I get only zero values. Those registers can be written back with different values, correctly. I'm sure I didn't understand correctly the modbus address mapping to GT's internal memory. Can anybody help me? Thank you.
  7. GOT2000 Recipes

    Hi I'm new to GOT2000 Hmi and I have a problem about creating recipes on (GT2107). Do I need sd card or usb memory stick to save recipe or I can save it in inside memory of hmi?  Can someone told me how to do it step by step cause I only have errors when I want to save or load recipe.  Thanks in advie 
  8. Hello Guys, I have a problem with my Screenbuttons, if i push them, my drive moves only an Impulse. I see on the Simple-Motion Module that the Signal is during pushing the screenbutton is active, but the Axis moves only an Impulse. In example M400 is for drive the 2nd Axis to the right side and M405 for the left side. My Hardware is: FX5U, GOT2000 (GT2505HS-VTBD)
  9. GT2710 screen not refreshing

    Hi All, and apologies for what is probably a proper newbie question. I have a Mitsubishi GOT2000 (GT2710) connected via DH485 to an Allen Bradley SLC500. Most of it works fine except for one base screen, which when opened doesn't get updated with any values. Opening any overlaying window screen will then causes the underlying base screen to then get populated. It's almost as though the first screen doesn't know where to get it's data from until the second screen is opened. As before I'm a beginner with this, so hopefully there is a simple setting that I haven't spotted. Thanks in advance for any advice.  
  10. Hello everyone I placed a Alarm Display (User) on a Screen. The Alarms are correctly displayed. So far so good. If I touch an alarm the cursor appears (the alarm is selected) works OK also. Problem: The cursor on a selected alarm is white and I can not read the error "underneath" it. If i move the cursor to another alarm, the previous alarm is visible again. I consulted the docs and realized a missing option "text color on cursor display" (see attached picture). There it should be possible to "XOR" or "Inverse" the color. Well, yes I have a "Simple" series model, but it seems like an error in the GT Designer Software. What do you guys think about this? Is there a place where i can report bugs to Mitsubishi? Thanks DWIM      
  11. Hello everyone, I would like your help on an issue. I have a screen designed with GT Designer3 ver1.156N. I found the Ver1.156N software, I installed it, but I can't open the project. I would appreciate it if you could help me with what to do.
  12. GT2107-WTSD not showing in GT Designer3

    Hi guys, im just looking for some help if possible, I am trying to setup a HMI (2107-wtsd) but GT Designer3 does not have this model nor does it have any 2107 models in the GOT type dropdown. How can i get my model to show? I have tried setting the GOT type as a G2105 and the GT softGOT2000 and these did not work, the HMI is on a white screen with install package data but i cannot do this if it is not in the GOT dropdown correct? I have attached some pictures to show. the HMI is connected to the PLC via ethernet and the laptop is connected to the HMI via usb I am very new to this so we are using test benches so if anything looks wrong i am very sorry
  13. GT designer

    Hello everyone Im updating a HMI with GT designer, the problem occurs sometimes when i try to save the new changes it display the pop up notification that i have attached, therefore i cannot save my changes and i must start over, what is pretty frustating because once i do it again and save it there is no problem.  Does anybody know if im doing something wrong? the application was created with melsoft Navigator, what it seems to me being the problem not a fan of mitsubishi... Thank you in advance
  14. Hi all. This is hopefully an easy fix. I have words and bit values in a recipe that I am trying to show in a logging file. I can get numerical values to show but I can't get the word devices from the recipe to show up on the logging file. Eg my devices from recipe set as a string starting with device gd60120 and in the logging file I want gd60120 to show the word, they are both set as unicode.  
  15. Hi guys, im trying to redirect a screen when a bit is active in GT designer3. im still a beginner in the GOT. any help? regards, sathu.
  16. Hello experts, Im trying to figuring out to do some modifications in the HMI. As I’m not experienced so much with HMIs, I need some help and advice. May be if I explain the problem with more details it might be easy for you to give me some guidance.    Currently we are using so many sliders to change parameters in the screen. For example, in a screen we use 5 parameters to change and each of them have separate sliders. I’m trying to figure out if there is a way to make some buttons and when we choose a parameter a same position in a screen will use a big slider to access those parameters. Basically, a same big slider for change all the parameters.      As there are lots of elements involve in a sidebar, I couldn’t find out a way to make it. Can you give me some guidance to make it?   
  17. Convert GOT2000 to GOT1000

    Hi everyone, Does anyone know how to convert programing data from GOT2000 to GOT1000. Or how to copy device from GOT2000 to GOT1000. Thank you very much.
  18. GOT 2000 Buil-in Memory exceeding

    Hello Everyone I have an issue with a  Got 2000, im updating and adding some screens in  a old  HMI application with size was about 47 MB,  as im still updating i wanted to test the application  which now sizes about 52 MBbut is not possible due to the shortage of  ROM and RAM, what can I do in this case as the application must be in the built-in Flash memory which is very limited?   Thank you in advance
  19. Multiple inverters

    Hello Everyone, I have  a GOT200 where im using a single Faceplate for 9 inverters in my channel 2, and  in my channel 1 I got 3 PLCs, I try to use the Switching Station Function only for the channel 2  in a buttton, my problem is that I can only connect to 1 inverter , when I press the buton the switching station device value changes, but it remains in the same inwerter which is the Host, can someone give me a light on this? thank you in advance
  20. Multiple inverters

    Hello Everyone, I have  a GOT200 where im using a single Faceplate for 9 inverters in my channel 2, and  in my channel 1 I got 3 PLCs, I try to use the Switching Station Function only for the channel 2  in a buttton, my problem is that I can only connect to 1 inverter , when I press the buton the switching station device value changes, but it remains in the same inwerter which is the Host, can someone give me a light on this? thank you in advance
  21. Hi guys, Is it possible to convert integers to/from strings in scripts in GT Designer3? I don't want to perform the conversion in the PLC. Thanks,
  22. Hey all.  I'm adding some numeric inputs to an HMI screen (using GT Designer3).  Is there a way to create min and max limits to the values that can be entered into the numeric input?
  23. Hello!  I'm learning how to use mitsubishi MELSEC fx5u-32mr-es and an hmi panel mitsubishi electric got2000 model GT2104-PMBD. I have no trouble programming the PLC and also I managed to display a layout on the hmi but I ran into trouble with: How to connect the PLC and hmi directly via ethernet. I tried to connect them but the hmi says there is a comm error.  How to run a simulation using gt simulator. I made a program in gx works 3 and a design in gt designer 3, started to simulate but it says that the PLC type of the project is different from setting gt simulator 3. I checked the gt designer there I selected the PLC model FX, which as the only logical choice and in gx works I use the correct PLC/CPU (fx5u) so I'm kinda in a blind spot.  I hope someone out there can help me troubleshoot this problem since i need it in order to compete on a national level.  Best Regards. 
  24. CP1L PLC to GOT2103

    Hi, Could anyone please help me to set a Counter SetValue on Omron CP1L PLC from Got2103 HMI. The Device register on Got2103 doesnt take registers such as D0, it takes DM0. But the 'CNT 001 DM0' instruction doesnt work in Omron PLC. So what should be the Device address on HMI and Counter Set Value register. I am new to both Omron and Mitsi Thank you
  25. Creating pages on GOT with PLC

    Hello, I am trying to create new pages on a pre-existing GOT. Within the GOT there is a screen that displays a list of part numbers to be selected. Like the image below;   As of current, there are 10 pages with 10 part numbers in each page (Total = 100 part#). I want to create one more page for 10 more part numbers but I can't figure out how the pre-existing logic switches from page to another within the screen or how I would add more page to the GOT screen? Below is the ladder logic of how the screen switches from one page to another.