Search the Community
Showing results for tags 'gs2107 base screen programming'.
Found 116 results
-
I am trying to program an analogue output on a Siemens S7-1500 unit from a 4-20ma sourced analogue input scaled over 0-250 degrees. The analogue input will have an adjustable setting in the software for when the alarm status should occur and at this point I want the analogue alarm output to start to process at 4ma, at 5 degrees above the initial set point I want the analogue output value to be 20ma I have no idea how to do this so any help from people is greatly appreciated and advice on which analogue output card to use would be helpful.
-
Dear all schneider Experts, anyone having "Vijeo designer screen editor"Software for XBT012110 megelis HMI. Please give a download link, I got very stuck to get this software #Advanced Thanking you......
-
Hi guys. I have a new SRM50-HAV0-K01 sick encoder for my ELAU servo motor (model: ELAU sm 070-60-010-P0-45-M1-B0), and need to program it according to an old one (which seemingly is broken) via hiperface. device: PGT-11-S LAN software: SOPAS 2018.3 build 4.1.1.324 (Vm version 1.8.0_73) I tried to find any certain way for programming of sick encoders on the net using the mentioned device and software, but cant. all is only about datasheet or how to use teh software without an specific instruction. I am not even sure of that the old one is broken, except that in the analysis mode of the SOPAS (entering via hiperface) I can see the the sin-cosin graph out of its limitation line. The thing is I have bought a special tool which has not any specific instruction and SICK group does not reply any exact instruction for my issue. Here is my questions: How can I program the new encoder just according the old one? And how can I assure that the new one programmed just as the old one? and what is the definite sign of a broken encoder? anyone experienced?
-
I have a control that I want to use a Direct logic 05 plc in. It is a really simple program but it is going into a plant that has a main control panel that runs the plant. I dont know the brand of the plc in the main control. They want to be able to send me a command from their plc to the direct logic to turn on my unit. I suppose that would mean a simple set instruction to my plc. I also have a couple alarm conditions that I want to send them. For example if water pressure is to low I would put my unit in the alarm mode and send them a low water signal. If the chemical is low likewise, I dont have a clue how to do this in my program. Can anyone give me some examples in direct logic plc program for making this happen??? Thank you Thank you Thank you. MikeC
-
Small and newly started Controls Company available to provide service in the following areas: Controls Design Panel Building PLC and HMI programming Commissioning Services 15+ years in controls and automation ranging from automotive to material handling. Experienced with Rockwell and OMRON Can ship panels to anywhere in the world from Canada Will design and or build your panels to your specs and according to CEC and NEC regulations. Can commission your machines on site. www.ashtoncontrols.ca
-
Rotation animation in Factory talk view
Lakshmi posted a topic in Allen Bradley / Rockwell Automation
Helo All, Thanks for your support on my previous quiry. Iam now facing an issue with rotation animation of a motor in factory talk view. I have a screen containing 5 motors and good number of numerical displays. Numerical displays need to be updated just every seconds ,so i changed screen updation rate in SCADA as 1, changing so decreased my motor rotation speed. so do i have any other option to change motor animation fast keeping numerical display screen updation rate as 1 second?? i have used the tag syste/blinkfast -
I am new to Automation Direct software and how the programs are written. Can anyone explain how they handle the analog outputs? My processor does not support the IBox that makes life easier, so I am having to do it the old hard way. I understand most of the logic of how its done for sending data to one channel but I don't understand how the channel selecting works. Can someone give me a programming example or explain how that works? I am looking at the online manual that Automation Direct provides for you for the analog module but I am having a difficult time trying to wrap my brain around how they do their analog stuff ><
-
Is there any way of viewing a remote Proface GP or LT screen inside a second GP or LT screen? I want to do this to avoid creating and loading duplicate screens. Essentially it would be like using GP Viewer-EX where the PC is replaced with another GP or LT unit.
-
I am new for gx devloper,I want 4 to 20 ma value to scale with 0 to 5000 and out put with PID. Plz help me.
-
ML1400: Manipulate output through modbus/tcp
MikosMotta posted a topic in Allen Bradley / Rockwell Automation
Hello I have a scenario that's been bugging me for some time now. The scenario consists of a Micrologix 1400 that I need to control it's output from modbus/tcp. In detail what I really need is to be able to manipulate the O0:0 through modbus/tcp. The PLC would be the master and I would be the slave that triggers the connection to the master. I'm using a Modbus-Client on my PC and that should be the slave. Any idea as to how I can manage that? Currently I can send data to the master but everything is "stored" on B10 and I have no idea how I could write directly on O0. Thanks a bunch guys. PS: I'm borderline noob. -
I'm looking for the SWPIC-3 PROSYS programming software from the C PLC English version programming system. I am also looking for BRKAOL5-1 Centronics / online converter Online operation through the PC parallel interface. Any help would be appreciated.
-
Hi, I am currently working on window screen. I don't know how to disable function of closing the window (see attached red screen). The window screen is showing by pressing button on input. My settings are shown on the screens below.
-
I am new to PlC programming . Plz can anyone guide me for ladder programming for FX5U -4LC Temperature controller with autotune parameters . Plus i want to use a PT-100 for the same . Plz help me out.
-
Hi, I have some trouble with a CJ2M-CPU33. My client did a backup to memory card earlier today, and after this we did some changes through remote link. Now the client wanted to restore the previous backup to the PLC and has done so, but the system would not function correctly. After going online on the PLC it seems like the PLC is stuck in "Stop/Programming Mode". When trying to change to "Monitor" or "Run" mode a dialog comes up containing the following message: "Failed to change the operating mode. The operating mode may be still changing in the PLC." - All the dip switches are set to off after restoring backup - The PLC has been rebooted - I have downloaded the application again through CX-programmer - Verified that the PLC is set to start up in "Monitor mode" But nothing helps. The same message comes up when trying to change the operating mode. Hoping anyone can help to resolve this issue as it is very critical for us and the client. In advance, thanks for any tips or help received. Best regards Stian
-
I am new with GS2107 WTBD, please anyone tell how to set the following initial things: Base screen overlap window1 overlap window2 superimpose window1 superimpose window2 Dialog Window Just want to make any new program for HMI, but not able to proceed without above settings.
-
Hello everyone, I'm a student who recently started programming, and I could really use some help. I have a CPU-31 CJ2M OMRON PLC and a ADO41-v1 analogic card. I need help programming an analogic scale with a bipolar signal -10V to +10V to then control a drive, which will then control the motor. If anyone could help me out of give me some examples I'd be really thankfull. Thanks!
-
What am I doing wrong? I have an FX3GE PLC. I have set up the IP address 192.168.3.254 and I am able to connect with my laptop running GX Works2 version 1.501X. I also have a GS2107 that I have set up with IP address 192.168.3.18 (Default). I can communicate with my laptop running GT Designer3 version 1.151H. The HMI is still failing to communicate with the PLC. I have followed different threads on this forum, tried different port settings on the HMI. I have attached my settings. Is there anything else I need to set?
-
We have an install base of about 120 TWIDO PLCs anywhere from 1 to 10 years old with varying configurations, but all using the TWDLCAE40DRF base unit. Lately (over the past couple of years), we've had multiple instances where upon power being removed from the device, and then turned back on, the base unit fails and will not power back up. The typical case is that we turn on the power, a couple of LEDs flash for a brief (< 1 Sec) moment, and then nothing - unit is dead. Just wondering if anyone else has encountered the same thing.
-
Hi Everyone We are setting up a initial training in PLC programming for technicians, I got some experience with SIEMENS S7 but this seems to be an expensive choice, we would like to opt for a budget PLC but at the same time would like a user friendly software for teaching......I would like to have views of users of other PLC brands such as OMRON, MITSUBISHI or even Schneider??? thanks Jay
-
Hello, I have a micrologix 1400 plc connected to a length measurement gauge. The gauge sends an analog value to the plc to an analog input. I convert the value into a dimension and send it to F8:0. but I need this value in three different steps in the program. Since i just have one element of float (F8:0) is there anyway i can store the value in a different location or create more floating point tags eg. F8:1. F8:2 ? Thank You
-
PLC Fiddle - Free Online PLC Editor and Simulator in Your Browser
gclshortt posted a topic in Other PLCs
I have recently come across a free virtual plc simulator called PLC Fiddle. It will enable you to create simple PLC ladder logic code within your browser. This is an ideal way in understanding PLC concepts for industrial automation. All of the basic PLC instructions that come with most plc units have been incorporated in this virtual PLC software.PLC Fiddle is currently in an early stage of development but is functional enough to be helpful to you in learning and understanding PLC concepts. http://accautomation.ca/plc-fiddle-online-editor-and-simulator-in-your-browser/ YouTube Video: https://youtu.be/G43ZLOwu2dM www.plcfiddle.com Let me know what you think of this for a learning tool. Thanks, Garry -
A Decent Method to Start Writing a Program and Keeping the Fow
Maniesh posted a topic in CX-Programmer
Hello Friends, I've been writing a program for several days now, Actually I'm an immature for CX programmer and also for plc programming, So I'd like to ask you, if there is any decent way ,,,,I mean a good method of starting to write a program and keeping the flow of it so, it is easy to keep track on what i've been doing from the beginning.?? Cuz sometimes I face the problem of loosing points that were written by myself but not remembering them, So I'd like to learn how to organize my written lines as a wanna be professional. Thank you :) -
Good Morning. I'm budgeting an application with the following FR-F720, FR-D720, GS2107 wtbd, FX5U-32MT / ESS equipment, I would like to know what network configuration for the application, I need accessory boards for the inverters, what physical arrangement it would be better for this application, which network would be used in the application, besides which function do I need to read and write in the inverters? Can I do CC link? If possible indicate materials that I can use to configure this application.
-
Is there any website that provide all details about programming cables for all PLCs. I have one local Indian plc "Genie NX" manufactured by GIC India. I want to make programming cable for same. but unable to get details. please let me know if anybody used it? http://gicindia.com/index.html for more info
-
Hi, I am using Omron CP1E NA 20DTD with built-in ANALOG inputs and output. I know how to deal with digital inputs. But I have no idea about analogue input wiring and programming. I tried connecting gefran LVDT PY2 directly to an analogue input of plc. But the indicator light did not turn on. Do I need to use any signal conditioner or converter? The output of lvdt is 0 to 25volts. I HAVE ATTACHED THE DATASHEET OF LVDT. DTS_PY2_06-2016_ENG.pdf
