Search the Community
Showing results for tags 'got2000 device bit'.
Found 47 results
-
Hello all, I need to read device memory mostly I need to read R registers from PLC L26. I read device data, but inside of table, I can't find R or ZR registers. Can you help me? What I did wrong? BR KS
-
Hi guys, im trying to redirect a screen when a bit is active in GT designer3. im still a beginner in the GOT. any help? regards, sathu.
-
Hi everyone, Does anyone know how to convert programing data from GOT2000 to GOT1000. Or how to copy device from GOT2000 to GOT1000. Thank you very much.
-
Hello Everyone I have an issue with a Got 2000, im updating and adding some screens in a old HMI application with size was about 47 MB, as im still updating i wanted to test the application which now sizes about 52 MBbut is not possible due to the shortage of ROM and RAM, what can I do in this case as the application must be in the built-in Flash memory which is very limited? Thank you in advance
-
Hello Everyone, I have a GOT200 where im using a single Faceplate for 9 inverters in my channel 2, and in my channel 1 I got 3 PLCs, I try to use the Switching Station Function only for the channel 2 in a buttton, my problem is that I can only connect to 1 inverter , when I press the buton the switching station device value changes, but it remains in the same inwerter which is the Host, can someone give me a light on this? thank you in advance
-
Hello Everyone, I have a GOT200 where im using a single Faceplate for 9 inverters in my channel 2, and in my channel 1 I got 3 PLCs, I try to use the Switching Station Function only for the channel 2 in a buttton, my problem is that I can only connect to 1 inverter , when I press the buton the switching station device value changes, but it remains in the same inwerter which is the Host, can someone give me a light on this? thank you in advance
-
I have connected 2 temperature devices with him delta with plc delta by rs485. When I run plc I can see the temperature change on pc but the problem in hmi it's give errors. Com 2 errors I need someone help me to connect these devices please
-
Hey all - I am stumped and looking for some assistance. I have a project in studio 5000, v.32 where I have some ABB drives that are not recognized. I've installed the EDS files, exact same one my co-worker besides me did, and mine will not go recognized and it is driving me crazy! I've done it while online with the PLC and offline, still to no avail. I've also installed the EDS files by going through Tools>EDS Hardware Installation and by right-clicking on the ABB drive in the controller organization tree and registering EDS file. Thanks for any assistance, -k
-
How to connect and simulate with MELSEC FX5U and hmi panel GOT2000 GT2104-pmbd
Puntigamer posted a topic in Mitsubishi
Hello! I'm learning how to use mitsubishi MELSEC fx5u-32mr-es and an hmi panel mitsubishi electric got2000 model GT2104-PMBD. I have no trouble programming the PLC and also I managed to display a layout on the hmi but I ran into trouble with: How to connect the PLC and hmi directly via ethernet. I tried to connect them but the hmi says there is a comm error. How to run a simulation using gt simulator. I made a program in gx works 3 and a design in gt designer 3, started to simulate but it says that the PLC type of the project is different from setting gt simulator 3. I checked the gt designer there I selected the PLC model FX, which as the only logical choice and in gx works I use the correct PLC/CPU (fx5u) so I'm kinda in a blind spot. I hope someone out there can help me troubleshoot this problem since i need it in order to compete on a national level. Best Regards. -
Hi, Could anyone please help me to set a Counter SetValue on Omron CP1L PLC from Got2103 HMI. The Device register on Got2103 doesnt take registers such as D0, it takes DM0. But the 'CNT 001 DM0' instruction doesnt work in Omron PLC. So what should be the Device address on HMI and Counter Set Value register. I am new to both Omron and Mitsi Thank you
-
Hello, I am trying to create new pages on a pre-existing GOT. Within the GOT there is a screen that displays a list of part numbers to be selected. Like the image below; As of current, there are 10 pages with 10 part numbers in each page (Total = 100 part#). I want to create one more page for 10 more part numbers but I can't figure out how the pre-existing logic switches from page to another within the screen or how I would add more page to the GOT screen? Below is the ladder logic of how the screen switches from one page to another.
-
Hello all, I am a beginner with PLCs programming. I have an issue on GX Developer programming software from Melsoft trying to program my Mitsubishi Q-series PLC. CPU is Q03UDCPU. When the program is written and I try to upload it to the PLC, with the write to PLC window, I check -Program -- MAIN and -Prameter -- PLC/Network/Remote, click EXECUTE and a message appears : "Device point that is set in parameter is not match the device point in PLC". I can't fix it. In Parameter - PLC Parameter - Q parameter setting (window) - I/O assignment tab : I have (see image). Whe I use CHECK button it says there is no error. The X41 input device is plugged on slot 1/00. I am making this folowing the instructions a PDF I found on the Mitsubishi electric's wesite : Q-series basic course (for GX Developer). Thanks for the help, A. S.
-
Hey everyone! New member here, and this site has always been a big help! I try to help other folks too, but a lot of guys are super quick on here. I've got a problem using some obscure components. I inherited a sensor network at work that uses Panasonic S-Link and I need to read them from a Q-Series. Panasonic makes a module that slots into the Q Series called an SL-VMEL-Q that I have. My question is: Did I do everything correctly on my Mitsubishi side? I put it into the parameters as an intelligent module with 64 points and I put the correct address in for the start I/O. Is that all I have to do? This is the first time I used a module that wasn't on the drop down list when you add one in GX Works 2. I can read and write to the buffer memory, but I can't get the unit to send to or receive from the sensors. I think the problem is that there is no end unit on the S-Link line (I don't know if it's just a terminating resistor or what), but it previously worked without one, so I can't be certain.
-
Hello everybody, I am facing an issue with my GOT HMIs Performance at the Moment. I hope somebody can assist me troubleshooting these performance issues. I am using GOT2310 and GT2107 simple. The performance issues are in different projects. When I am talking about performance issues I am specifically talking about a laggy behavior during operation of the GOT. I am looking for a way how to actually debug and troubleshoot the performance issue. How to figure out what is causing the laggy behavior? The 2310 HMI is actually quite busy I am doing quite some different things: DDTs are active Different loggings are active (one logging is logging every 100ms) Multiple layers Different scripts, some of the scripts are executed ordinary The screens are using multiple layers Access data directly not via a DDT I have a communication error, this error seems to be relatively unique and I will open a different topic for this. There is communication in both directions but I do get a system alarm “communication error” What is the good practice to start debugging / troubleshooting? Best regards
-
Hello everyone! Can anyone suggest to take all the Input and Output (digital) status at a time in a single file for backup in gx works2 in FX2N PLC. I need to confirm that all required IO are in perfect condition before start operating the machine. Also I plan to design a troubleshooter to find problem.
-
Hi guys, I have been trying to sync up my RSLogix 5000 tag to GT Designer 3 (GTD3) objects but I noticed that GTD3 only recognize certain native data types from Allen Bradley Logix5572 Controller (Model 1756-L72). In the documentation that I found, it show that certain AB Native Tags are transferable to GTD3 Data Type (See the attached file "AB Tags to GTD3 Tags" ) One of the User-Defined Data Type from the RSLogix 5000 that I am trying to sync to Text Display Object in GTD3 is called "UDT_MY_CLTR_INFO" here is it's hierarchy of inheritance from RSLogix 5000 Name Force Mask Data Type MY_CLTR_INFO (...) UDT_MY_CLTR_INFO MY_CLTR_INFO.NAME STRING MY_CLTR_INFO.NAME.LENGTH DINT MY_CLTR_INFO.NAME.DATA SINT[82] In my exported tag which is a CSV file, it doesn't list the sub-classes MY_CLTR_INFO.NAME, MY_CLTR_INFO.NAME.LENGTH, and MY_CLTR_INFO.NAME.DATA, it would only list MY_CLTR_INFO. How do I link up my "Text Display" Object in GTD3 with the tag "MY_CLTR_INFO.NAME" whose Data Type is STRING and GTD3 does not have a STRING Data Type? I appreciate anyone that took their time to read my problem and any attempt to help me out. Thank you.
-
Hello everyone! Can anyone suggest to take all the Input and Output (digital) status at a time in a single file for backup in gx works2 in FX2N PLC. I need to confirm that all required IO are in perfect condition before start operating the machine. Also I plan to design a troubleshooter to find problem. Thanks in Advance..
-
HI Everyone, Recently i have bought a plc fx3ge and gt2000 hmi .the problem is that whenever i use a device address d280.b1 in hmi .i am not able to use the same address in gx works for plc (LD D280.1).can anyone help me with this problem.
-
Hello Im new using HMI got1000, Im trying to connect using Ethernet this HMI to a compactlogix, i already imported the tags, but i can't use any of them, because the gtworks3 says "you have to map the tags for set a device", i dont know what means map the tags, some one can help me please?
-
PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc. It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems). For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices. (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc. All the MB public/native function codes are supported. 32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic. Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later. Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services -Other Non-AB communication drivers for serial or TCP -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
-
I am looking for some sort of rotary input device which could be used for fine adjustment. Ideally it would have to two output pins, if turned clockwise it would send pulses on one of the pins and when turned counterclockwise it would sent pulses on the other pin. These could be connected to two inputs on PLC and a value in a given variable could be incremented and decremented depending on the direction of rotation. Almost like using potentiometer with analog signal. I guess if I can not find anything I could use incremental encoder and look at the phase of the output to decide which way it is being turned but hopefully simpler and maybe more cost effective solution is out there? Thanks.
-
Monitoring Global Label status in GX Works2 Structured Programming
controls_tech posted a topic in Mitsubishi
I am trying to find a way to do a "batch monitor of Global Labels" in Mitsubishi GX Works2 Software. I can monitor Device/Buffer Memory Batch but can't find a way to monitor all Global Label's status online? Can anybody help me on this?
