Search the Community
Showing results for tags 'got1455'.
Found 3 results
-
Hi community, i need help .... I want to connect my HMI GOT 1455 to a PLC OMRON CP2MC by RS-232, but i cant do it. I'm using the following connection: HMI GOT1455 - PLC CPM2C (Interfaz CS1W-CN118) 2 (RX) - 2 (TX) 3 (TX) - 3 (RX) 5 (SG) - 9 (SG) - 4 (RTS) - 5 (CTS) * PIN 4 (RTS) IS CONNECTED WITH PIN 5 (CTS) In the HMI I configurated driver OMRON SYSMAC, CHANNEL 2 RS-232, TRANSMISSION SPEED 19.200, DATA BIT 7, STOP BIT 2, PARITY EVEN. But with all of that I can't connect both devices. In the PLC i can see the led COMM blinking, so it should have communication, but the HMI show me "Communication error. Refer to System Alarm in Utility Menu"
-
good day! I would like to put some ascii code in a device: D3000..D3009 has to be filled with 0x5F54 0x4F5F 0x4150 0x6F73... ("_TO_APos") When I fill it using an ascii-input-field in the designer and press "enter" it works. But I would like to put this text automatically in D3000 and following register, when the user press a switch-object. I tried with an 10 actions "keycode" but I don't see how to say that the key code shouls be saved in D3000. Can somebody tell me the best way to fill more word devices with only one object switch? Thanks in advance MEBoerner
-
Hello! I want to execute a script exactly one time when I touch a switch. I add a switch on my screen, I set on the register "script" a little script to test, I checked "use object script". When I start the GOT1455, the script runs all the time, even if I never touched the switch. Can somebody help me to find the issue? Or give a TODO List to exceute a script only If I touch a switch? Thanks a lot in advance MBoerner
