Search the Community

Showing results for tags 'gmail contact number'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 13 results

  1. I want to offer my industrial surpluses for your projects! All details are verifiable. Excess surpluses often occur. Sending to any country in the world. The price is low. I can pick something up for you personally. Sending can be made, both expedited, and economy air delivery. Ukrposhta or EMS Ukraine. Siemens Simatic, Wieland,  Wago 750, BECKHOFF, Schneider electric, Schneider Automation, Yaskawa Omron, KEYENCE, Pepperl+Fuchs, Telemecanique, ABB, FESTO,  DUNKERMOTOREN, Eaton, Micro Innovation, Jumo, Phoenix contact, Bruel & Kjaer, Unitronics, Samson, Danfoss, OMRON, Rexroth Indramat, Fanuc.  https://www.ebay.com/usr/vitalij6131   All parcels are sent by Airmail, are processed with disinfectants and sent with a large number of bubbles before being sent. For safe delivery of the parcel to you! I am worried about your safety, in this difficult time for you!
  2. If it is about changing Gmail ID on phone it is advisable to open the device settings application further at the top the user should click the personal information account then under the “Profile” or “contact info” the user should make the necessary changes. If you are still looking or searching for more information than in that case it is advisable that the user gets connected with the certified Gmail technicians. Lines are open for help and support all the time there is no such issue that cannot be resolved by the Gmail technical team.
  3. Network Number Problem

    Hi,  I am trying to connect a new CJ2M-CPU31 to a used NS12-TS01B-V2 (it seems to be restored to default). I want to connect that using Ethernet.  In the Cx-Designer I have set the following for the NS ethernet Port:   - Ethernet: Enable   - Net number: 1   - Node number: 5   - UDP Port: 9600   - IP address: 192.168.140.5  //  255.255.255.0  //  0.0.0.0  //  0.0.0.0 And the following for the host:   - Name: CPU_A   - Type: SYSMAC-CJ2   - Protocol: Ethernet/IP   - IP Address: 192.168.140.10 In the Cx-Programmer I have set the same IP address for the PLC from the I/O table configuration.  However, they are not connecting. After some seconds the HMI shows a Time-out Error. I am used to works with this kind of HMI, I think the problem is in the PLC because this is my first time working with a new, out of the box, PLC. I have tried to comunicate them using the "Com. Test" tool from the System Menus of the HMI; however, I didnt get it.  I think the problem is than the integrated ethernet port of the PLC is not in the Net Number 1. I have tried to set it using Cx-Integrator. I have clicked in "Create routing tables" -> "Insert SIO CPU unit" for the Unit250(Integrated Ethernet Port) -> Local network number = 1 -> Transfer to PLC. Nevertheles, the windows "Online Connection Info" is allways showing Net(-) instead of Net(1):    "Ethetnet [CJ2M-EIP21] Net(-), Node (10),  Unit (0)" I have checked the Cx-Integrator Manual and says in this case it is only neccessary to "Connect", but I have tried it, waited for the 254 nodes, and... it doesn't work!! I don't know what to do! Thank you.
  4. real to integer number

    Hello, Could somebody give for me advice how need seperate real number to integer? for example I have in D10 real number 10,9 for me need to do integer number 10 and 9. The real number seperate to integer I am using this LADDER line, attached picture. In D90 I got 10, But how to isolate the number of decimal places,I can not think of. Please help for me
  5. In order to conduct a change or a reset of the password, the user should follow the given steps- • Open your Google account in order to sign in. • Then under the security section select signing into Google. • Then select a password as you will have to sign in again. • Then in the field enter your new password and then click on “change password” and if you need any sort of further help connect at Gmail Support Number UK 
  6. Why am I receiving a Gmail verification code without requesting for it? There can be multiple reasons for you receiving a verification code without requesting for it there is a possibility that someone who knows your Gmail ID is trying to get an access to your Gmail account or if you are trying to log in your account with a new or an unauthorized access, Google will always send you a verification code if you will open your account on a device on which you have never opened it before you will also receive verification code whenever you will enable 2 step verification for your Gmail account.
  7. Bits on Contactor

    I use ladder logic in its most simple form. In ladder logic on the left, I have contacts(ANDs and ORs configuration). They are either switches, logic results of functions or switches, or canned strobing On the right, I have all types of functions, timers, keeps, counters, etc. As a simple example, I have a canned 1 second strobe feeding a counter. I can use the counter as a contact to close when it reaches zero. Does all of the" business" have to happen on the right? For example, the left side of the IF/(contact) statement can I put something like a bit comparison on the left? Something like... Counter, Bit# Or do I have to use a bit comparison on the right and its binary result as a contact and put it on the left?     Thanks    
  8. Hi, totally new to PLC's .. Just trying to do a university assignment I've connected a DTC1000 to Fatek PLC Port 2 - RS485 I want to know in which register I can find the measured temperature. A friend said you should add 400000 to the converted from hex to dec number which is mentioned in DTC manual. http://www.deltronic.su/userdata/files/dtc_manual_eng.pdf But I'm not sure which value should be used in manual and is 400000 the number to add (and where it has come from!) If I can just find the register, I can do the rest (just a bunch of normally open and close and  .. Thanks
  9. G9SP Configurator

    I am at a client site that has a line with multiple Omron G9SP-N20S safety controllers installed and I need to make a modification to the system.  I tried to install the Omron Configurator and it asks for a serial number, and will not install without one.  Omron said that it is on the CD that ships with the unit, but the equipment manufacturer did not supply any of the CDs.  The only Omron solution is to order a replacement CD, that will take 5 days, which is 5 days too long as there is a hard stop in 2 days.  I have tried entering numbers found on the controller, with no success.  Does anyone have a better way, special contacts at Omron, to et it faster?
  10. Hello everyone! I have problem with understanding the usage/principle of operation of parameter "Mark detection number".  In manual i read: "The number of mark detections is stored. "0" clear is executed at power supply ON. Continuous detection mode: 0 to 65535 (Ring counter) Specified number of detection mode: 0 to 32 Ring buffer mode: 0 to (number of buffers - 1) Refresh cycle: At mark detection" My question is which mark detections are stored? Servo detects some kind of marks? I am novice in servo programming, please explain in the easiest way. Thanks for help.
  11. Studio 5000 Logix Designer

    We recently obtained a new Vendor ID (VID) Number from ODVA, 1477 for the purposes of developing an EtherNet/IP scanner device.  When we try to use that number with the Allen-Bradley PLC & Studio 5000 Logix Designer, our data type REAL's are showing up in Studio 5000 as SINT's.  We have seen this mangling of data types before when using the Omron VID, 47 with the same Allen-Bradley PLC/EIP Scanner.  The data types are being misinterpreted, or mangled from REAL to SINT, e.g. the *.eds file defines 32 REALs for Input and 32 REALs for Output, but within Studio 5000 we see 128 SINTs each for Input and Output. It is as though the Allen-Bradley/Studio 5000 database does not have our Vendor ID.  When I change the *.eds file, Vendor ID Number from #1477 to #1 then we see the *.eds file being properly read and interpreted, e.g. 32 REALs for Input and Output show up as 32 REALs each.  Does anyone know what file we need to modify in Studio 5000 ???  We want to add our Vendor ID #1477 to that file. Hardware: EIP Scanner: Allen-Bradley Compact Logix L18ERM EIP Adapter: Delta Tau Power PMAC Motion Controller (EIP OpeNer Stack) Thanks in advance! See screenshots below. within Studio 5000, see screenshots
  12. Have looked on this forum and found NO hint of a solution. I hope someone can provide me with a starting point. I have a Allen Bradley Micro830 & Connected Component Workbench that I use to SMS text message out the value of an Analog sensor. The value is a real number data type so it holds a number like this 123.32659+e. All I want to do is to "Truncate" so that the value ends up being like this 123.32 this would then be what sms receiver would see as the value. Thanks
  13. Syswin v3.4

    Hello every body I need serial number for Siswin v3.4 or crack. I have original software Siswin v3.1, but i don't find token Someone may help me? Thank you