Search the Community
Showing results for tags 'ge proficy machine edition'.
Found 30 results
-
Hello, I really appreciate the help I have gotten from you all. Thank you so much. I have an anomaly I need your experienced opinions on: When my state machine gets to state 3, it will hang and not update the state machine variable to go to the next state. I use [MOV K24 D3999] where it hangs; and is an example of how I do all my state changes which do work. (my states are 21 through 28; 8 states total). Each state is super simple like this one attached where it hangs, I could easily simplify to a few states, but I did 8 for debugging and organization purposes. Maybe I can get around it if I shrink my state machine but but it shouldn't be hanging like this and I should learn what the issue is to help me out later with bigger state machines. ================================================== About the attached image: D3999 is the state machine variable and it shows state 23 (the 3rd state) so this rung is active. It does a bit shift on something to the left as expected, increments a Z10 variable for some outside operation as expected, but fails to move 24-decimel into D3999 so it hangs here. The image is snapshotted during live operation: the [= D3999 K23] is live, shown by its blue highlighted boarder. The bit shift and increment do happen, and if I did not make them P functions (P means pulse so they happen only once on a rising edge) then they operate repeatedly when it hangs making it stuck shifting millions of times and counting Z10 like crazy. But MOV and MOVP does not matter, it will NOT mov K24 into D3999. The fact that the SFL(P) and INC(P) functions right next to the MOV(P) function do work, but MOV(P) will not, is really odd. I can manually enter 24 into D3999 in the watch menu, which works, and the state machine continues on. Every other state uses the same logic (using MOV K# D3999) successfully and so the machine cycles back to this 3rd state (like normal) but then get stuck on this 3rd state. Any ideas why it is doing this? I do not use SET or RST on D3999 to avoid that kind of latching... Note: I tried INC(P) on D3999 here since it always goes from state 23 to state 24 (states 3 to 4), but the INC(P) also fails to increment D3999. INC(P) Z10 works though...??
- 4 replies
-
- fx5uc
- mitsubishi
-
(and 2 more)
Tagged with:
-
Hello Engineers. Is it a good idea to run RsLogix 500 in a Windows 10 virtual machine with a Windows 11 host? because according to Rockwell Automation, there is no compatible version of RsLogix for Windows 11. Thank you
- 4 replies
-
- rslogix500
- virtual machine
-
(and 1 more)
Tagged with:
-
So, our plant has Proficy iFix 5.8 running on a handful of Windows 7 VM's, which, form my understanding, are running 24/7. However, since before a got here, they have had an issue where iFix will crash usually every couple of months, leading to screens and panels not looking right and freaking out everyone at the plant, and we reboot the VM. Apparently, we have always tried to reboot them every 3 months or so. Long story short, this is a difficult thing to organize at our plant. I would prefer to know why this is happening in the first place and try to fix that problem if possible. I was wondering if anyone else has experience this type of issue or may have any idea why this happens or if this is normal. I can barely find anything useful pertaining to iFix, online. I have attached a pic of what I see in Windows event viewer before rebooting the VMs. This is what mostly caught my attention: Faulting application name: CONMGR.EXE, version: 5.8.8255.0, time stamp: 0x5240ee18 Faulting module name: MSVCR100.dll, version: 10.0.40219.325, time stamp: 0x4df2be1e I haven't been able to find anything concerning Connection Manager either. Any information is appreciated.
-
EcoStruxure Machine Expert Missing IEC objects tab
deividasn posted a topic in Modicon / Telemecanique / Schneider Electric
Hello im using EcoStruxure Machine Expert 1.2 and i missing IEC Objects tab on the Controller properties. thanks for answers!-
- ecostruxure machine expert
- modicon
-
(and 2 more)
Tagged with:
-
Emerson (Prophecy) vs. Rockwell (A-B) Lets be real...
junkyardgary posted a topic in Product Reviews
I've been debating whether to stay at my current employer who uses Emerson PAC software, vs going back to a similar company that uses Rockwell (compact/control logix) mainly because A-B is used by most companies around here. I work as a technical temp, usually 12 month contract jobs. Learning the Emerson PAC (aka Prophecy) seems to be a waste of time, since I am not aware of any companies that use it, other than my current employer. My placement company is pushing back, but I know I am correct. I do not have hard numbers, but I've been around the industry for 20+ yers, and have only seen 1 company use Emerson. Does any one agree or disagree, or have some circumstantial evidence of the actual market share of A-B vs Emerson. I am mainly working in the Auto industry, in Michigan. Just looking at this site, there are 3200 postings for GE and Emerson combined, vs 58,000 postings for A-B. -
I've been using this Emerson PAC software for several weeks now. I cannot seem to get the search function to work well, when working on PLC. I can open a search box (from the search icon) and type in text that's right on the screen, and it returns "not found". It's frustrating. I've tried using wild card *, quote marks, % signs. Nothing works. How does one properly use the search function? My coworkers are just as stumped as I am. Unfortunately nobody has real training on this software, we are kind of thrown into the fray to figure it out on our own. It would greatly improve my troubleshooting time if I could find things, either by variable number, or description text. The on-line help for this software is about non existent. One "tutorial" is 8 hours long, another is over 11 hours long.
-
Please Help me, I want to connect aczet brand weighing machine CG203L to PLC CP1L-M. But several times I tried it didn't work, I've tried repeatedly in the settings section to adjust the baud rate and mode and have tried one by one but to no avail. Can any of your friends help? thank you
- 2 replies
-
- weighing machine
- plc
-
(and 2 more)
Tagged with:
-
Rock wool sandwich panel roll forming machine
netcec001 posted a topic in For Sale, Employment, Services or Wanted
EPS& Rock Wool Sandwich Panel Making Machine including unwinding, before cutting, film, beading / molding, rock wool and spray delivery, Edge foam, continuous curing, cutting and other functions, high degree of automation, stable performance.Edge polyurethane foam systems, automatic feeding system, to ensure that the raw material requirements in full accordance with the ratio of mixing, spray evenly; using a reliable foam technology to ensure uniform sheet foam, dense, sheet closely connected.The production line is equipped with automaticcontrol system, userfriendly interface for easy operation, monitoring, advanced computer control, easy to adjust the entire line of argument, effectively ensure the production line stable and efficient operation. https://www.yingyee.cn/sandwich-panel-production-line/45509417.html -
Hi Team; I am trying to determine if there is a way to find the lowest of four int values without using 30 instructions. It seams the GE RX3i PLC does not have a MAX or MIN function. This is made even harder by having to be in Ladder. Any help would be most appreciated.
-
Hey Guys, Modicon M221 PLC, programming with Machine Expert. I have a project that I must create shifts for heating elements, requiring that some heating elements, those who were on for the longest period, do not turn on in the next shift. I'm looking for a sorting mechanism to determine what %MW (6 words of 8 total) have the largest value. I would like an array of 8 words, sort them, and retrieve the highest 6 or highest 4 or highest 2. Thanks.
- 5 replies
-
- m221
- machine expert
-
(and 1 more)
Tagged with:
-
Dear Colleagues, I require some help with regards to setting up virtual machines, We have some ControlLogix 1756 PLCs scattered around site running on different version (v20, v21 & v32). My company requires all software installations on company computers to go through IT. Installing all these versions on single PC is really a pain (going through IT) for new hires and for new PCs. I am trying to suggest using virtual machines for each version that can be shared/distributed among the engineers and also to give engineers some autonomy in the VM environment. How do I go about this especially with respect to licensing without violating the terms of use both the operating system and the automation software?
- 3 replies
-
- studio 5000
- virtual machine
-
(and 1 more)
Tagged with:
-
Control List Rockwell, GE, AutomationDirect
Masen_Suhadolnik posted a topic in Allen Bradley / Rockwell Automation
I'm a young Controls Engineer at an integration company, and I need assistance. I have a client that has about 330 different alphanumeric product numbers broken down by length and width. The operator must be able to select the product number at the HMI to pass along to the robot we are integrating. Is there a way to be able to have the operator select the product number simply, without having to scroll over 300 items in a single control list. The HMI is not chosen yet, so it can be GE, Rockwell/AB, or Automation Direct, but we are using a AB ControlLogix Processor. Racking my brain and I have little VBA/Scripting experience.- 3 replies
-
- factorytalk view me
- combo list
-
(and 4 more)
Tagged with:
-
I'm an automation tech in a tool and manufacturing facility. Lately, we've quoted a few projects for customers that include tooling (stamping dies usually) as well as some partial automation. The automation is fairly simple usually...motor, drive, actuator to transfer material in 2 axes, e.g. The company president and quoting engineers don't think it's a big deal for us to do this, but I'm a little wary to agree to these projects. I have 2 years experience doing all sorts of small programming tasks, wiring, control panel design and build, troubleshoot, etc. However, I also know that there are a lot of industry and safety standards to follow when you start machine building/integrating for customers. The tooling build is straightforward and is our forte. But we have no electrical/controls engineers, and we have no standards really for automation "builds". I've done smaller projects for us and I'm trying to develop some sort of standards, but there was nothing like that when I came into this position. Anyway, should I undertake these sorts of projects in your opinion or not? And if I would, what sort of knowledge/standards should I master in terms of liability and safety, and where would be a good place to start in developing a wiring/electrical schematic standard? Thanks for your assistance. Andrew
-
Hi all, i'm creating a ComboBox using Visual Basics on Factory Talk View SE. My issue comes when i tried to add items to the ComboBox. But this items must be values from a P - Parameters List. How can i do this? I have a little code created but doesn't work. Anyone can help me? Thanks in Advanced PD: Here is my actual code. Private Sub Display_AnimationStart() Dim List As StringList Dim Msg1 As String Set List = Me.TagParameters Msj1 = Lista.Item(1) ComboBox1.AddItem (Msj1,1) End Sub
- 1 reply
-
- vba
- tagparameters
-
(and 6 more)
Tagged with:
-
"Failed to open connection to PLC" (M241 & HMIG3U (HMIDT542)
Hihaxen posted a topic in Modicon / Telemecanique / Schneider Electric
Hi, I've been having a problem with my Schneider setup, and I can't seem to figure out the problem. I'm using Machine Expert Logic Builder and Vijeo 6.2, and I can't seem to download to my PLC. I can download to my HMI just fine, but my HMI comes back with the message as mentioned in the title. Also when I perform a full download, machine expert comes up with the message "Could not connect to the device for item "xx", selected target system "PLC name" is different from the connected device "HMI name". The weirdest thing is that machine expert shows my PLC just fine, but doesn't show my HMI. I have no idea what to do, as I feel like I've tried everything. The IP range is fine, subnet is fine. The driver in IO manager in Vijeo has the PLC nodename in it, so that shouldn't be the problem either. Does anyone know what to do in a situation like this? Thank you in advance!- 4 replies
-
- m241
- schneider electric
-
(and 4 more)
Tagged with:
-
How to change file extension .cxp to .cxt without being able to "Save As"
Marquis posted a topic in CX-Programmer
Hi, I would need some help, because I need to work on a program from my house, but I don't have the same version as the one we have at school. I know what I need to do to make it work, but I'd need the file to be in ".cxt" format, and I simply cannot open the file to "Save as" a ".cxt" file. We have a non-Educational Edition version at school, and I think it's v9.0 or 9.1. I've attached the file. It would really be appreciated. Projet_(final).cxp Projet_(final).opt- 6 replies
-
- .cxp to .cxt
- ee
-
(and 7 more)
Tagged with:
-
Hello, I currently have two IC220PNS001 connected to IC695PNC001. The PLC being used is IC695CPE330. Out of the two PNS001, one of them has a solid SF Red light on which means bus error according to the Status Parameter IO. I disconnect every single IC220 card connected and downloaded the whole configuration but I still have a Bus error. PS: I have also tried to switch the PNS001 with the brand new out of the box and I still have the same error. In the manual, it says Profinet Diagnostic available, can somebody please guide me as to where I can find the Profinet Diagnostic, also is there any manual for PNS001 which explains the in-depth debugging process for this PROFINET Controller.
-
1
-
- pme
- proficy machine edition
-
(and 3 more)
Tagged with:
-
Hello all, I am an electrical engineering student and I am looking for some software to program some GE 90-30s I've acquired. I received the PLCs from a mentor at my internship after the summer was over. I have somewhere between 7-8 of them with a bunch of cards and other accessories. I was hoping to start doing some projects on my own to study them, but unfortunately, I don't have any software to program them. I have some files for Logicmaster from the company directory that I was given permission to copy, but it won't run in any compatibility mode. Does anybody know where I could find another copy of the software or a download for something like versapro or proficy machine edition for a student? Even if I have to pay a discounted price, I would, I just want to learn programming basics.
-
We have an old press using a Series 90-30 with a 311 CPU 5 Slot Rack. I am trying to pull the program off so we can convert it to a new CompactLogix. I am using Proficy ME v6.0. I have the proper RS232-485 cable and a built in serial port on my XP laptop but cannot get it to connect. I know that Logicmaster projects cannot be opened by Proficy ME and being such an old 90-30 it probably was programmed using Logicmaster. Would being programmed by Logicmaster prevent me from even being able to communicate via serial connection?
-
There have been many good discussions on the applicability of cloud-based solutions for manufacturing and process control systems. On one side, some people have concerns regarding security and control of the information, on the other side, there are identified benefits enabled by cloud systems. From VMS minicomputers to DOS and Windows, from ArcNet to Ethernet, it is inevitable the industrial automation systems shall adopt the technologies that are getting predominant in IT general use; the current environment that I am calling the “Cloud-iPad era” is no different; therefore the practical discussion is not if those new technologies will be applied in the industrial environment, but how. This paper is not intended to join the conceptual discussion about the cloud, but just to present a few simple practical examples, where cloud technologies are already enhancing industrial automation solutions and enabling new business opportunities. CloudPracticalApplications.pdf
- 1 reply
-
- supervisory control and data acquisition
- scada
- (and 5 more)
-
Dear, Folks Greetings of the day I am got very confused in "State Machine" Based Logic design, now am doing Index table based vision inspection system it having 6axis servo, now the major issue is I need to do the better logic with easy error traceability technique. So am chose state machine based system design but the error handling of system is very difficult for me. Any Process automation experts give me the proper solution for this issue or suggest any good book for this state machine error handling concept. Am tried it in web search but I can't get suitable answer < Thanks in advance >
-
PLC and SCADA Consulting Services
TrevorArmstrongPE posted a topic in For Sale, Employment, Services or Wanted
I am starting my own consulting business, so put my experience and technical know-how to work and ensure the success of your process control projects. No project is too small! I hold a Bachelor’s of Science in Electrical Engineering from The University of Arkansas, and obtained an Arkansas PE license in 2014. After working for a Generation and Transmission company as a power plant controls engineer, I have decided to put my skills and experience to work as an independent consultant. My SCADA/HMI experience includes GE’s Proficy Cimplicity software, and Rockwell Automation FactoryTalk View SE. I also have experience programming controllers using GE’s Proficy Machine Edition, Rockwell Automation Studio 5000 and RS Logix, and Emerson Delta V. Check out my LinkedIn profile at https://www.linkedin.com/in/trevormarmstrong for more details regarding my experience and past projects. Contact me through these forums, LinkedIn, or via email at tmarmst@gmail.com any time for more information on my services or availability.-
- proficy
- cimplicity
-
(and 4 more)
Tagged with:
-
changing memory word with variable
wouter94 posted a topic in Modicon / Telemecanique / Schneider Electric
Is there a way to choose with %MW you use depending on the value of %SW49? For example, i have 7 %MW: -%MW4 that needs to be active when %SW49 :=1 -%MW8 that needs to be active when %SW49 :=2 -%MW12 that needs to be active when %SW49 :=3 -%MW16 that needs to be active when %SW49 :=4 -%MW20 that needs to be active when %SW49 :=5 -%MW24 that needs to be active when %SW49 :=6 -%MW28 that needs to be active when %SW49 :=7 so is there a way to say %MW0 := %MW(4*%SW49) on a operation block? -
Versamax, send datat on modbus rtu network
HossMoh posted a topic in Allen Bradley / Rockwell Automation
Hello i have a versamax plc icu200udr064 which is connected to a modbus rtu network. i want to send some coils states on the modbus network with a specific data address, so can this be done by proficy machine and if yes can you help with that? thank you -
Versamax, send datat on modbus rtu network
HossMoh posted a topic in Allen Bradley / Rockwell Automation
Hello i have a versamax plc icu200udr064 which is connected to a modbus rtu network. i want to send some coils states on the modbus network with a specific data address, so can this be done by proficy machine and if yes can you help with that? thank you