Search the Community

Showing results for tags 'fx5u'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 86 results

  1. Good day, I need help, how I read data from Balluff BVS001C Identification over ethernet? Thx a lot
  2. Good day, I am new in mitsubishi and have a question about how build built in ethernet communication on fx5u fw 1.050 gx3 1.047 with smc ex260 sen1, where i need send 2 bytes and receive 4 bytes can u help me? I try to send data with this format 2#0000000100000001 and send by Ethernet Active Tcp connection library where I have added the external device configuration ip and port SMC EX260 SEN1, I think I needed use a CIP protocol and port 44818 or Ethernet/ip, maybe I need add a ENET module to use this communication between my devices? Thanks a lot for answers
  3. FX5U comm with A1SJ71QE71N3-T

    Hi, does anyone has program example of ethernet communication between FX5U (GX Works 3) and A1SJ71QE71N3-T (GX IEC Developer). I need to read and write in both directions. Thanks
  4. I have a fx5u plc connected to 2 keyence sr 1000 qr code scanners using plc link. On random times the plc error light will light up and all ethernet connection will be disconnected and i cannot connect to the plc with gx works 3. If i put the plc in stop mode tho i can connect to the plc. I do not know what error code is causing this because each time i connect the error code is missing. The problem starts when the plc is in run mode. Can anyone help me with this as this is a persistent bug that keeps on happening in my system?
  5. Hello everyone, I am new to Mitsubishi PLC. My device is  IQ-F series FX5u-80 and GX Works 3 to set up parameters using ST. I need to implement a function that waits for a confirmation signal in order to continue to the next step of the program.  I though about another way by using a delay function instead of confirmation single for testing purpose
  6. Hey guys, I've question about Transient transmission (TT) via CC-link using FX5 as a master. According to chapter 4.3 in "FX5 User's Manual (CC-Link)" only way to access TT is via computer with GXworks3. Is there some workaround to use standalone FX5?   Thanks again
  7. Does anyone have any experience with the recently released user web interface for the iQ-F and iQ-R series. Supported by GX Works3 version 1.047Z or later, the firmware Version 1.100 or later. We have the sample user web interface running in a FX5U, its working very smoothly. I am currently looking into how to edit the html page, does anyone have any tips or useful tools/resources that I could use to work things out.       iQ-F Customer News regarding FW Update 08-2018.pdf
  8. Hello Everyone I have a problem to connect FX5U with Inverter Mitsubishi D700. ( no  respond from inverter) . I did read and following the manual. Could any one can help me?
  9. Hi ! I have to Control and Read an Masss Flow Controller (MFC) MKS MF-1, I have give this one an IP Adress (10.46.103.75). How can I Control it over Modbus TCP? I found in GX Works 3 in Tool/Predifined Protocol Support function the Modbus Menue, but i have no Idea how to Config it, i have no Idea how Modbus works..... Have someone an Example for a Configuration? 
  10. 1ms TON and TOF GX Works 3 FX5U

    Hi everyone I'm new to FX5U, 'cause I previously used Q-series PLC. So, is there any possibility to make on delay timer with 1ms PT?
  11. Hello, I have managed to send output to a terminal using a serial channel.  I have not been able to send data from the terminal to the Mitsubishi PLC. I am not using terminating resistors but I have a slow baud rate of 4800.  I am just using regular wires (1.5mm square) .  I think the hardware is okay as I can see the output from the PLC on the screen. Attached is the code.  I just send from the terminal the character 22 every second, I hope this is not too incomplete to get some help.   The plan I guess later is to interface with LabVIEW probably using Modbus but I need to try to get this working first.     UL9.gx3
  12. I have the following array received from the RS232 port: RD_data[0]=H0020 RD_data[1]=H0030 RD_data[2]=H0030 RD_data[3]=H0030 RD_data[4]=H0031 RD_data[5]=H0035 RD_data[6]=H002E RD_data[7]=H0032 RD_data[8]=H0036 which means " 00015.26" how do I convert it to the real number 15.26 in FX5U PLC? SOLUTION: I used BTOW to set the data for EVAL instruction  
  13. Hi, Many Programms we have are written in Codesys and in ST Language  and now we have a FX5U and I'm trying to Convert some of them. But the both Systems are different, I miss the Librarys like util.lib and FB like RAMP_REAL, BLINK, LIMITERROR which are in Util.lib. Are there Librarys like util.lib for GX Works 3 ? Is it possible to convert Ladder to ST? (I dont have any Idea from Ladder and I'm new in Programming)  Have someone Sample Programms for me for Training?
  14. Hello Everyone, I am struggling with interfacing Incremental encoder with FX5U PLC, Does anyone have parameter setting and sample program for same. i am unable to fetch counts...   Encoder: 500ppr, 24V line drive, A-B phase,  PFA datasheet Hollow Shaft encoder.pdf
  15. Hello Everyone, I am struggling with interfacing Incremental encoder with FX5U PLC, Does anyone have parameter setting and sample program for same.   Encoder: 500ppr, 24V line drive, A-B phase, 
  16. Good Morning. I'm budgeting an application with the following FR-F720, FR-D720, GS2107 wtbd, FX5U-32MT / ESS equipment, I would like to know what network configuration for the application, I need accessory boards for the inverters, what physical arrangement it would be better for this application, which network would be used in the application, besides which function do I need to read and write in the inverters? Can I do CC link? If possible indicate materials that I can use to configure this application.
  17. Operation error

    I am developing an application with fx5u with inverter d700, it fails to send a command to the inverter, only running the application and monitoring the clp does not appear to fail, only when it sends a command. Attached photo of plc configuration and error. Do you have any secrets to doing communication, can I do it with a normal network cable? I'm doing with just one inverter, as the terminator should be at 110 or 330 ohm.    
  18. modbus application

      I am making an application with a fx5u with 4 d700 inverter, what is the way to communicate with them and the configuration in gxworks3, someone has an example in ladder.
  19. Hello everybody, I have network from : PC - 192.168.3.11 PLC - 192.168.3.250 I change this option in FX5U PLC in GX Works3 for Network Ethernet port --> Application Setting -> Security -Disable Direct connect with MELSOFT : Enable/disable -DO not respond CPU module search : Respond / not respond and I upload program to PLC. After upload program to PLC and restart it was impossible to connect again. I Have ping between PLC and PC, but could't write program. Always writes me Error <ES:0180840b> So to disable Security Option you should to do : 1. Open Works3 2. New Project (Choose your PLC - FX5U) 3. Online menu 4. Specify Destination Communication 5. Click twice in PLC module 6. Set Connect via hub (In my case i connect PC and PLC directly !) 7. Choose IP Address ( in my project : 192.168.3.250 , PC must be in same network 192.168.3.X) 8. Give OK 9. Connect Test. With steps I disable security options and it was enable to connect to PLC and Write data on it. I Hope that will help to other with same problem. Special thanks to : Piotr Tynor(Mitsubishi, Poland ) , Adam Syrek (Mitsubish, Poland ) , I. Ayvazova (Bulgaria) , K. Raykov (Bulgaria)
  20. Hello. There is a controller FX5U-32MP in the presence, the inscription "CC-Link IE Field Basic" and the Inverter (FR-A840-00170-E2-60) near the connector, the inscription "CC-Link IE Field Basic" on the front panel. I set up both devices according to the instructions. It turns out to read the state of the inverter (state, frequency). And I can not manage from the controller. Already all the settings that could have changed. Can you scribble what is wrong? p.s. Sorry for the bad english.
  21. How to allocate memory in rcpu to link datas of FXcpu . through CC link configuration
  22. In 1 - sorry for my English level) 2 - please take a Look at the picture - pid with auto-tuning. The problem is the opener, speed want to control using pid. The speed depends on the loop. The idea - the loop above the sensor - the greater the speed of the decoiler. According to the program stored in SD6301 current high (analog input to which you've ultrasonic sensor), D1500 specified value. In D204 - output pid. I have the exit D204 either 0 or 9999. Help me?
  23. FX3U and FX5U Modbus RTU comparison

    Hello. I have tested different type of communication between by rs485 fx3u and fx5u. On fx3u side used fx3u-485-adp-mb. In case of N:N and Parallel Link fx5u is more comfortable than fx3u. But, modbus rtu not so good. I made 3 tests: 1)FX3u master with ADPRW function; ADPRW in fx3u supports wider count of modbus functions, most usefull for me is H17 (Read/Write multipleregisters). But when i send telegram to Fx5u with this function, fx5u fall in error (recieved unsupports serial com functions). i have checked instruction manual on ADPRW - FX5u doesn't support H17, only H03 and H10. For read/write from fx5u need to use 2 instructions on FX3u side. 2)FX5u master with ADPRW function; In this test ofcourse i tried use H17, but result was expected - error. 3)FX5u master with predifined protocol. In this test using H17 function on Fx5u side was successful. Conclusion: FX5u better use as master for modbus rtu communications via predifined protocols, and if it used as slave need remember that it doesn't support H17. I hope this information will usefull for sombody.
  24. FX5U With E-terminal

    I was looking for what drivers that should be used when connecting the new FX5U plc with the older E-1000 series (E1100 in this case) in e-designer 7. Intended connection method is ethernet on the FX5 (obviously) to Ethernet on the E-panel. I am sure this question will come up for several users so let's keep this thread as clean as possible. Has anyone done this Before? Here are the options available: /Niklas
  25. Good day  I require some assistance with the configuration setup (GX Works 3) for FX5u PLC inter-communication (PLC to PLC), over Ethernet (using the built-in Ethernet port). The purpose of the inter-connection is data exchange. (Values stored within the PLC storage registers such as words and bits).  Does anyone perhaps support files on this such as a procedure or example? Thanks