Search the Community

Showing results for tags 'fx2n-4ad'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 37 results

  1. Starting Problem with FX2N-2LC

    Dear Experts, I have been trying to activate FX2N-2LC temperature control block but nothing could help. I have tried the ladder logic which is available in Mitsubishi manual but this is not any output from the module. Please help me or guide me to get rid over this problem, I am attaching the ladder diagram so you guys will get the Idea to where I am going wrong.   FX2N-2L Program.pdf
  2. Error 6706 Mitsubishi FX2N

    Hey guys, I'm really a newbie on PLC's, I'm working with a metal sheet folding machine. The past programmer gave me it's code, but I guess he gave me the wrong one. So, I uploaded the program with GX Developer 8 to a Mitsubishi FX2N-32MR PLC, all looked fine until I tried to run out the program. The error 6706 appeared up on step 3928 (blue rectangle). I read something about it already in other posts. But I'm not quite sure what to do. Can someone point me on the right direction? I attached an image where the problem thst showed up.  Thanks. 
  3. fx2n 4AD-TC

    respected all masters I am doing install module fx2n 4ad-tc with plc fx2n 128mr and i shall use only (k-type) thermocouple. give me complete ladder jpg file of fx2n 4ad-tc thermocouple k type. now attention respected masters never give the simple code and instructions of pdf I have more pdf and codes I want it all people did follow with easy way I hope you don't ignore me   thanks
  4. cannot connect to fx2n plc

    Hi I have 2 fx2n 64MR/MT plc I can connect to one of them without any problem but other one the PROG_E LED is flashing and I cannot connect to it for programming and dowanload my backup to it , its error is aboat cpu type or cable. the battery of this cpu disconnected for 10 days. pay attention that I can connect to other CPU same as it(I said at first). thanks every boady
  5. Does anyone know if the FX2N modules such as FX2N-EX can be used with the FX5U? The plugs are compatible - and the colour is the same ;^) - but I suspect that they may have upped the speed of the bus, or made other changes. Thanks.
  6. widadi

    does anyone can help how to connect plc fx2n-16mt with servo drive mr-j2s-40 and motor servo hc-kfs-43 ? please give me wiring schematic thanks a lot
  7. Hi, I am not an advance user of PLC's but I can muddle my way around. I am currently reviewing a program written by another person and I will need to make some modifications. I have noted that on a M8002 pulse the Mitsubishi FX2N-8AD CH5 to CH8 -[To K0 K1 H3333 K1]-  are all set for a 4-20mA current input which is perfectly acceptable however on the same pulse is written -[TO K0 K22 K0 K1]-. I was hoping that someone could explain exactly what this is doing. I understand that the first K0 is the module number K22 is BFM#22 but I am not sure exactly what this is and I am a little confused by what is written in the manual. (8.2.7 BFM #22: Sets convenient functions: The functions described below are assigned to b0 to b3 of BFM #22. When a bit is set to ON, the assigned function becomes valid. When a bit is set to OFF, the assigned function becomes invalid..............) .Due to not knowing exactly what BFM #22 is doing I am unsure why the next K0 is used and the final K1 is to do this operation once? I apologise if this seems like a very basic question but I just can't seem to find any further detail online regarding BFM#22 that I can understand. Any help would be greatly appreciated. Thanks for your help. Paul.
  8. Position Controller

    hi, im student im trying to make a position control with the misubishi serie of servos, i have 2 mr-j2s-20a and 1 fx2n-20gm i was reading the manual i didnt readed all yet, i wat to know if i can control the position with a fx2n plc and if someone can send me a example of a code using it. thx for your attention 
  9. I/O configuration error FX2N

    Hello please could you help me with this problem . I have FX2N-16MT CPU with expansion modules FX2n-16ex-es , FX2n-16ey-es in that order . when i download the program on it and moniter online  i have active output on y22 ,y25, y13, y00, y27 (software) , i only found led of y00 (CPU module) ON , others of expansion op module not  (P.s power lamp on module on ) , however the expansion of ip doing well , .  i do that trails . 1-change combination to be FX2N-16MT CPU - FX2n-16ex-es -  FX2n 16eyr (new one) , but same happen  , when i go to plc diagnostics i found error 1010 i/0 hardware configuration  2-   FX2N-16MT CPU -   FX2n 16eyr (new one) , but same happen 3- FX2n- 14mt CPU (New one ) - FX2n 16eyr (new one) with same program it works ok  .  i wondering how melsoft software recognize expansion module of FX2N series and if it need hardware configurations (by rack like siemens plc ) the way of addressing ip and op in mitsubishi plc FX2n series . how to change it . and if i wanna to change the cpu 16mt , by 14mt ., does i need to change spacial markes or function on the machine program . . i m sry for my bad english and thanks in advance     
  10. sir, i don`t know how to configure Fx2n-4AD AND Fx2n-4AD-PT module with PLC fx1n-60mr please tell me complete detail of program write in GX develpr..if possible...attach picture of program
  11. I have very little experience with Mitsubishi logic and I need to modify an existing program from 1999. I am looking for some insight on how to approach this request. The required change has to have Y035 energize 2x during one scan of the program. (Double stroke the cyclinder) FX2n PLC Y035 connected to a spring return solenoid GX Developer 8.20W (Originally coded with Melsec Medoc 16bit) M855 M630 -------| |------------------------------------------------| |-------------------------------------------------------------------------------------(M857 ) MAN MECH | PWR ON EXT MECH TEST | CYL | | | M645 M860 M760 | ------| |------------|/|------------| |-------------| CYC OK INDX2 OK INDX1 START RET M857 M858 M859 M630 ------| |------------|/|------------|/|-------------| |-------------------------------------------------------------------------------------------(Y035 ) EXT MECH TST OK TST FAIL PWR ON MECH CYL CYL RET RET EXT I can upload source code if anyone is interested. Any suggestions would be greatly appreciated!
  12. Hi, I have a program for FX2N-48mr written in GX Works (gxw). I'd like to convert the software to CodeSys. If possible, can anyone send me the best procedure for it? Thanks. Oren