Search the Community

Showing results for tags 'fx0s motor reverse relay'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 51 results

  1. Dear Team,   We are looking for a suggestion to drive a motor which is away about 2100 Meter from its starter. The Pump is located in a pond in the forest which is 2000 Meters away from the nearest building. The pump capacity is 55kW and we are considering 55kW HD VFD as a starter. As we see the distance is much higher we are looking for you valuable suggestion about how this thing is gonna work without any abnormalities.
  2. Hi everyone , I need your help !!! I am currently working on a project where I have to control a stepper motor (oriental motor AZD CEP) with a proface HMI. To do this I use implicit Ethernet IP messaging. The problem is this: when I change screens, I lose the connection between the two devices. After 20-30 seconds, the connection is reestablished. I've already spent two days on it and I can't figure out where the problem is coming from. Does anyone have any idea what's wrong? If you need additional information or screenshots to understand, let me know. Thank you in advance for your help.
  3. Problem with Stepper Drive

    PLC : Mitsubishi FX5UJ-60MT/ES Stepper Drive : TROY TR22-2   My problem is, When I Jog it, the Motor will have noise and vibrate(Example at video). I already ask my supplier and they test with their kit, my supplier says suspect the speed may not enough faster, so will have this noise. But when I use PLC to trigger it, still have the same problem. Even I increase the speed, the motor still rotates the same as the video.   i changed PLC to Omron  CP2E PLC, don't have this kind of issue.    Please help me,Thank you WhatsApp Video 2023-05-25 at 12.53.32.mp4
  4. Hi Guys,  It might be an off topic, but I need some help, with motor sizing. I have to choose a Sew motor with a proper gearhead. I made the calculation, for the speed thats okay. But I got stuck with the loads. It will be a conveyor, the roller and the product mass altogether is 29 kg. I  made the calculation for the load inertia check: Roller moment of inertia (J1);    m2=mass of roller;     d=diameter(mm) J1=1/8*m2*d^2*2=1/8*8*0,2^2*2= 800 * 10^-4 kgm^2 Belt and material mass = m1 = 21 kg;  Belt and work moment of inertia (J2): J2=m1*( π * d)^2/4* π ^2= 2100 * 10^-4 kgm^2 J=J1+J2 = 2900 * 10^-4 kgm^2 They give me a motor with gearhead, sew eurodrive Ka37/T DRS71S4BE05. This motor performance is 0,37kW, I think its enough, but on the documentetion, I didn't find any data, about the permitted load inertia. Can anybody help me with this ? Thanks ahead.            
  5. Hello, I am trying to flash an indicator light (Banner  K70LBGYRPQ ) every .5 seconds.  The PLC manual says 2.5A per channel.  The light uses roughly 113mA max current @ 24vdc.  I am using output 0 to do this (O:0/0).  I think I may have ruined the output by flashing the indicator light.  Has anyone ever experienced this before?  Is there a minimum pulse time for this PLC?  What do people normally do when wanting to flash an indicator light such as this?  This is not the first time I have seen this happen.   Thanks in advance!
  6. Hello I am not sure if anyone know how to select cable cross section for 5KW AC motor? Thank you
  7. Hello,  I am using Omron’s safety G7SA to relay 24 volt line. But the strange thing happening is that, one relay’s output is only 5 voltage, even the relay is on. I exchanged relays, it remains the same. Maybe the base socket is problematic?  Or is this just G7SA failure? 5v (exactly 4.96v) is strange. Please give me some advice.   Many thanks in advance.   Ting    
  8. I have a question regarding hazardous zone design. My control cabinet will be in safe area but I need to have e-stop and safety limit switch located in hazardous area, Div 1 Zone 1. I am assuming that I can use zener barriers or isolators between the field devices and safety relay. I just wonder if the safety relay will function properly with barriers in between? Also do I have to use 24VDC safety relay for this application? I don't know what voltage/current is present on the terminals connecting to safety devices.
  9. ello I have a powerflex 400 of 25HP for a 60amp 25HP motor, the motor have a belt that move the clarifier of milk. It is a process that requires strength to move.So I try with the motor without the clarifier the vdf works well with a constant amp of 12 to the max of 50hz that is set up with a ramp of 600 sec.Then I try with the belt that move the clarifier... The vdf start the ramp with a wird amp behavior like 10 sec 100 amp and then 13 amp for 10 sec.When it gets to 50hz (the max) it starts the same behavior 13 amp when it reach the max RPM and when it decrease a little bit it gets 100 amp to get to the max RPM again.In this vdf powerflex 400 I didn't see the % of torque options that the last one Fuji had.Someone told me that powerflex 400 is not for power processed, they are focus in pumps and blowers more alike, and that I need a vdf vectorial like a powerflex 725.What do you think...PD: as the 100 amp is like 10 sec the protections dont show up. PD: I made a try with water and hot water, in that point with the max hz  (and 6800rpm) when the hot water start to flow the amp gets constant in 75 amp, but the motor dosnt get to the 6800 rpm again it just keep trying in 6700rpm and it mantains the 75amp triggering the motor protection for overload.
  10. Hi , we have Fx3U-128MT and a Hybrid Stepping Motor 2 Phase (17HS4401).   Do we need to install  FX3U-2HSY-ADP to control the stepping motor or we can program it no problem using  PLC User's Manual - Positioning Control Edition? Do we need  a Driver?
  11. home postion servo J3

    Hi, I have a Mitsubishi Servo motor with its amplifier MR-J3-350T. I lose the home position. How can I set the value of the position to zero if I detect a home detector. I use gx developer. thank you
  12. Hi, I am quite newbie in the PLC world but I got my hand on a Kinetix 5500 (model 2198-Hxxx-ERS2) with a VPL-A0631E-C motor. I also have a CompactGuard logix 5380 to program it. I am doing a "for fun" project to experiment and learn how the devices work.  My first question is about power wiring. In my understanding from the manual, the Kinetix 5500 main power can be configured as three-phase or single phase (Using the L1, L2, L3, GND connector - think is called IPD). In my home I have a classic 220V (EU) socket. Is there a way to connect the Kinetix directly to my socket? I tried a few random stuff like L1 -> L , L2 -> N or L1 -> N , L3 -> L,  (GND -> GND) but every time the circuit would break. (Actually, I had one lucky attempted where the circuit did not fail with  L1 -> L , L2 -> N, and I managed to operate the motor, but when I reconnected it again it failed. Am quite buffled about the issue here. I am using a socket splitter if that something to comment on.) The second question is about purchasing an actuator. I found many interesting stuff like index tables or linear actuators. I requested a few quotes from some vendors but the price range they provided is a bit off budget for me (the majority was more than 2k). I am looking for some thing to attach to the motor in a price range of 1k - 1.5k. Do you have any suggestions for me? There are no load requirements. I just need to have a moving part so that I can for example put a barcode sticker on it and change the behaviour reading on that. I could attach something handmade but I am willing to put something extra to buy commercial equipment. As I am new to this, feel free to comment any inaccuracies or misconceptions. Happy to learn.
  13. I searched FX5 manuals and it appears that with the high speed inputs I can run a stepper motor without a motor controller. I have little experience setting up a new system with any motor but have made changes with servo issues. I sent a request for info from my supplier but I still have some questions/requests.   1. Can an FX5U control stepper motors without a motor controller? 2. If not then what Q/R series setup is required 3. Are there any document to help understand? (program examples are welcome)   Main objective is to run a sensor head to 3 or 4 specific points using a belt driven linear actuator with a nema motor.
  14. Siemens IEC 60870-5-103

    Hello!, im having some troubles communicating Siemens Relay 7SJ622, with the IEC 60870-5-103 protocol, with some SEL controller, i don't have any signal of the slave relay 
  15. Siprotec Relay 7sj62

    I have 24 Siemens Siprotec relay(7sj62) which i want to communicate with Scadapack 330E (Schneider) on 103 Protocol. but every time I try to communicate it shows Slave device is failed to communicate. trying to communicating via serial (RS-485). What should i do..?? or do i need to communicate it with Siemens PLC..?? If so which PLC should use..??
  16. PLC Panasonic FP0R Motion Control

    Hi, I am using FP0R C32T, i use FPWIN GR to make plc program using jog operation instructions F172. I used the program exactly like manual, but still got error code 45? Did anyone know about this thing?
  17. Good Afternoon  im a complete newbie when it comes to PLCs but have done plenty of PIC programming in the past. I've been gifted a couple of FX0s 20mr units to try to repair something I made with PICs years ago. It got damaged during a move and I can’t see well enough now to make PCBs anymore so thought that this might be a solution. The basic operation is  1. switched on 2. motor A moves till hits limit switch (X000) 3. Wait 2 seconds 4. motor reverses till hits second limit switch (X001) then once this has been completed then the following  5. Motor B turns clockwise for 30 seconds then stops  And while Motor B is turning I need Motor C to turn until hitting limit switch (X002) I then need to get it to repeat on the press of a button but I need to reverse operation of Motors B and C I am using double position relays to drive the motors so motor A is on Y000 and Y001 if I power either relay the the motor turns in that direction. Same with Motor B and C Y002 to Y005 is this something that’s possible with one of these controllers or am i going to be programming a PIC to control the PLC ?   All the various COM and powers are connected up, I can individually make every motor do what I want, but the program doesn't flow from one item to the next. but this is probably just me      
  18. Is there a way to monitor the Temperature of a Servo Motor on Allen Bradley Servo motors... MPL? PLC: CompactLogix 1769-L30ERM Drive: Kinetix 6500   Motors: MPL-B310P-MJ72AA, and  MPL-B560F-MJ72AA I would like to be able to monitor the temperature, and flash a warning screen on the HMI if the Motor gets too hot, or perhaps shut down the operation before the Motor overload trips. The drive and PLC are connected through Ethernet IP What I don’t know is if that Motor heatsink temperature information is available to the PLC.
  19. Hello, Have this error come up constantly and can't be reset. Motor hasn't tried to drive at all. Second motor showing same problem. This is a new configuration on new machine. Other inverters configured without any problems. Anyone seen this before or any ideas what could be the issue.
  20. stepper motor position control

    Hello, I need to have a cx-programmer code which I can control my linear actuator position by setting 3 positions with timer, I am using a CP1L pro'skit
  21. Sample blocks for S7 1200 plc's

    Hi experts, please share the sample blocks for the EDITABLE TIMER block it should be editable from HMI(Siemens). And also motor run hour block. Actually i am having all blocks in tia v12 version and sadly i dont have the old software to convert it again. So please share the blocks that it shoud be work in TIA V14 for s7 1200 plc's. Please note that the blocks should use add instructions to calculate the time because i don't have much memory.
  22. can anybody Know how to control stepper motor using PLC
  23. Hi all. I have a Kinetix 350 and an AB TLY servo motor. I'm using the drive's STO function. AC power is supplied into the drive, passing through an "M1" contactor. It makes sense to m e to keep that contactor open, preventing AC power to the drive, until the drive is fully awake.  Is that what you guys do? Someone suggested to me in another forum ( http://www.plctalk.net/qanda/showthread.php?t=121021&highlight=drive+awake ) that there is no reason not to supply power to the drive right away because the STO function is inhibiting power to the motor anyway. 
  24. Hi All, I have an AB servo TLY-A110T and 2097-V31PR0-LM Kinetix 350 drive. I thought that it was fully configured and ready for tuning, but when I issue a MSO it immediately starts to spin the shaft (no load yet). This lasts about a second until a Physical Axis Fault, Excessive Velocity Error occurs. I've double and triple checked the feedback and power wiring, and everything looks right. Is there anything else I can check? What can I do to trouble shoot this if I can't even give an MSO? Any insight is greatly appreciated.
  25. Bonjour, Hello, I use a l33erm automaton and a Kinetix servo motor . This servo motor drives an engine with a chain moving in steps of 100 millimetres (there are 15 steps on the chain ) At each top of a cell this motor advances by 100 millimetre. in reality it advances from about 0 to about 100. Sometimes it is 100,002 times to 99,997 (this is important further) and when I give it a top it goes back to about 100 (100,003 times to 99,996) And so on and so forth up to no problem, I use a MAM with an absolute type of movement. It works.     However, this does not work any more after a rearmament following an emergency shutdown. if it is a 100,002 no problem at the next top the chain advances one step But when the engine is shut down at 99,997 and I give it the order to go to 100 it advances only by 0,003.  This only happens after an emergency stop (or door opening). Thank you for the help you can give me excuse my English this is a machine translation Un séjour sans faille