Search the Community

Showing results for tags 'factorytalk studio'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 226 results

  1. Hello, I have a .PBW file in an obsolete PanelView that I need to troubleshoot, but I can't open it.  Called AB TechConnect for support, but tech said it was too archaic and he, essentially, needed to start with a Windows98 machine and PanelBuilder 32 to even begin.  FactoryTalk doesn't know what to do with it.  File is attached.  Any suggestions/assistance is much appreciated ABWWTP.PBW
  2. I am trying to use the Event "SaveUserAlarmLogToFile" tied to my F1 button to save my alarm history to my SD card installed in my screen, but I can not find any details on how to specify the file name for the save...can someone please clarify what should be entered for the file name?     Thank you!!!!
  3. Hello All I am new to sysmac studio, i am using a NJ301-1200  and R88M-KN10H servo drive , i connected the servo to the NJ using ethercat. I was able to write a program where i was able to activate the servo from the NJ using the mc_Power instruction . My question is , i am not able to run the servo using the mc_movevelocity and mc_moverelative . Do any one have any suggestion to how to go from here ..  
  4. I use Netgear routers with multi-NAT capability to attach machines to the company LAN. One of the advantages is that similar machines can have identical network addressing schemes while a multi-NAT router on each machine can be used to assign unique external addresses. The usual error on these setups is to forget to assign a gateway IP address and so the PLC can't respond to requests from outside its subnet. I have the router set up as normal (as I have done a hundred times before on other machines). PLC has correct IP address, subnet and gateway (that of the router LAN address). Router has NAT rule configured, correct LAN subnet, etc. I can PING the PLC from the company network. This implies that the router, wiring, etc., are all OK. If I disconnect the PLC ethernet cable during a PING I get errors. This implies that the address is unique, etc. Controller --> Communication Setup --> Ethernet connection via hub --> Ethernet communication test --> "A communication error has occurred." Has anyone seen this? Any reason why it shouldn't work as I expect? Many thanks.  
  5. Hello, I am looking for a way to programatically select a recipe. Any time that a recipe is change or saved, the recipe viewer object always resets its view and selects the first recipe. This will lead to possibly writing the wrong recipe to the controller, as well as frustrate the user if they have to scroll through a hundred items to find the recipe again. I looked at the VB functions, but the only one I could find that was close was the .SelectedRecipe, which is a read only. I am using Sysmac Studio v1.1.7, and an NA5 HMI. Any help would be appreciated.
  6. I have several parameter files that I need to create. I did them all in excel, renamed the files with .Par extension. The files open up in notepad and I can see the parameters that I created. When I open them up in Studio they all look like the following. The *.par will open fine in notpad just not in studio. Thoughts???   Studio 湕瑩ല⌊㴱笠㨺䑛䵗䱐嵃牐杯慲㩭慍湩牐 Notepad #1= {::[DWMPLC]Program:MainProgram.Unit[2].HMI_Auto} #2={::[DWMPLC]Program:MainProgram.Unit[2].HMI_Man_FWD} #3={::[DWMPLC]Program:MainProgram.Unit[2].HMI_Man_Rev}  
  7. Hi, Now I am using Sysmac Studio - NA HMI. I am facing the problem of Data edit tool here I am unable to give Indirect address. Like this address HM15_Recipe_hmi(Index_No).SetPoint_1 But If I give direct Address its working HM15_Recipe_hmi(8).SetPoint_1   I Hope someone give the solution.    
  8. Hello everyone, Working in Automation for the first time as a Co-op student so i'm fairly new to PLC's and the Automation field in general. I've recently been tasked with converting a RSlogix 5 program from an old PLC 5 project into a Studio5000 project. I referenced the manual (I'll attach link below), and had no issues using the RSlogix Project Migrator tool that I downloaded off the Rockwell website. My problem is that once I convert the program, my I/O tags that were originally sequenced in octets(0-7, 10-17, 20-27, ...) from the RSlogix 5 program, are switched into a sequential scheme in Studio5000 that just increments them in order (1, 2, 3, 4, ...). I hope this make sense, but basically the first seven tags match between the projects, but then I:010 in rslogix 5 is equivalent to I[8] in 5000, I:011 is I[9], and so on and so forth. Has anyone had this issue before and found a way to have Studio5000 keep the original octet scheme? I don't see this normally being an issue, but the customer has specifically asked that the I/O tag names be kept the same as the original program. Thanks for any help. - Ben   Converting PLC-5 reference manual link: https://literature.rockwellautomation.com/idc/groups/literature/documents/rm/1756-rm085_-en-p.pdf
  9. Hi all, I am new AB family, currently got into a new project but i have following doubts, Please clarify my following doubts. Project Details : I need  to implement 21CFR part 11 Compliance in AB HMI (1&2) -  2711P-T10C4D1 & 2711P-T6C5D As per my study, i understand that 21CFR can be imlemented by FactoryTalkView(FTV) ME edition V10.00. But HMIs currently available are programmed using FTV 5.0 version. Can we upgrade the FW version of HMI and convert the old HMI backup (from FTV 5.0) to new Backup (FTV 10.00) and load it  without disturbing the old backup HMI screens/settings ? So, Please give me solution .... If you have datasheets, documents, Videos also , kindly share with me. Thank You in Advance, Thanks & Regards, M.Monish Kumar monish.uatpl@gmail.com  
  10. Hey, I am fairly new to the NA screen so I didn't get time to research much but for some bizarre reason, if my alarm message is long instead of going to the next line it just continues. Is there a specific way of creating a multiline alarm. Any suggestion or if you have inside for a crash course on NA screen would be helpful. Thanks
  11. Hello:   I need to link  a lot of variables, pointing to CIO address, like "AT" field, but is a large volume of tags to create, so, I have a chance to assign a memory location to a variable in ST like:  my_tag := %100;  (trying to assign tag address to CIO 100) ? If not, there is a method to import tags from a Excel ?   Thanks.    
  12. Good day, I would like to extract the FT View SE Alarm Log. We currently have got a Excel spreadsheet set up with a connection to the FTAE SQL Database.  When I refresh the data, Excel give an error telling me that the data is more than what can be displayed in a spreadsheet. So it then discards the latest data. I have tried setting a database limit in the Factory Talk Administration console to only keep the last 60 days worth of data but it does not seem to take effect. I get data from January 2017 up to 15 October 2018. Is there a way to configure the ODBC connection in excel to only give me the data for the last 30 days or is there someone that can help me to limit the size of the database? I have attached the current connection config.
  13. Hello:   Im new on this foroum, and Im glad to become a member, and new on the Sysmac studio too . I have the following ST program line: My_array[0]:= y[0];   Where My_array, is a array of bool, and y array too. After load and all, on monitoring return a "!" Sign, and trying to change value retuns "Failed to write variable, check if variable or memory area are alloed to write". I tried to move both arrays from global to local, and change adressing in "AT" field, witout changes. Any help will be wellcome. Thanks in advance Dante  

  14. C-mode hostlink library for NJ/NX1P or CP1L

    Patrik Arvhult posted a topic in Omron

    Anyone knows if there is a C-mode hostlink library for NJ/NX ? Also, a C-mode hostlink library for CP1L could be helpful, to translate such a library to work with NX1P is probaly less work whan writing a new library.  Maybe Omron France has developed such a library? - they seem very active..   Background: Looking into writing a programmatic c-mode hostlink master for NX1P12, this is for connecting the handheld NSH5 HMI to the NX1P12 via RS232C using a CIF01. I have the hardware set up, and an machine built, expected some compatibility efforts by Omron.... but the NSH5 seems to talk C-mode hostlink, and the CIF01 only seems to support the FINS version hostlink.   On the NJ you can of course add an SCU module, thus not need a library.  But working with NX1 ( due to limited space available ), you are dependet on available CIF-modules which do not support C-mode hostlink.  
  15. How to watch the value in decimal directly in the ladder page ?  Default Hexadecimal The only way I can do it is in Watch Tab and I/O map per example Thank you
  16. i am new in indusoft web studio. i am facing a problem about communication of indusoft with plc.   i am communicating with plc through fx2n-422-bd card.   can some one guide me the steps of communication.  he/she will be a life saver.. as i am  in a deep trouble
  17. Hi. I am new to Allen Bradley PLCs and bumped into the following issue, that I cannot find any solution to. When trying to add a module to the I/O configuration I get the attached error, error code 80131940. This prevents me from adding any hardware configurations in Logix Designer. I have tried to reinstall Logix Designer and uninstall all AOPs. I am running V30.00.00 on a Windows 7 Enterprise SP1 OS. Your feedback is very much appreciated.
  18. Hi, is it possible to communicate between the Sysmac studio simulator and the CX-Programmer simulator? I want to test the exchange of data between a NX1P2 and a CJ2H, but I don't have the controllers with me. Thanks and have a great day!

  19. Unknown runtime password for application

    Controls_FNG posted a topic in HMI & SCADA

    Hello, I am trying to restore a runtime application from one of our pvp+1000 hmi's, the only problem is nobody knows the password for the runtime application. I have talked to the OEM that installed the electrical cabinet years ago, and every password they have given me will not work. I am able to log into the configuration screen. Is there anyway someone would know how to get around the password or reset it so I can modify the existing .mer file?  Thanks, new guy
  20. I have a configured and working FT Transaction Manager, but the computer it’s installed on needs to be replaced and now I'm trying to install FTTM on different computer. I’m trying to complete the configuration "checklist", but when I get to the "Define Data Points" step, there are no applications in the "Select an Application" pop up window. What's wrong? I'm new to all of this...

  21. Torque Control

    avfleali posted a topic in Omron

    Hi, For my system I use the functions Mc_MoveAbsolte and Mc_TorqueControl. my problem is when i use absolute function after torque control for zero point. the servo turns the torque point control. For example: Target 1: 200 mm target 2: 150 mm Target 3: 240 mm ( Start point of torque) Taget 4: 330  mm (end of process) Target 5: 0 mm After "end of process" the servo turns  to "start point of torque" Can you help me please    
  22. I've found very similar errors, but not exactly this one. Does anyone have any insight on how to remedy this? I'm using Factory talk and RSLogix5000.
  23. My apologies for being a newbie on this, but could someone save me on this... I have a Viper 650 and an eMB-60R controller which I want to control by ePLC connection using an NJ501-1300 PLC unit, SYSMAC Studio with EIP Adept Library for Robot... All are starting up well, and I connect all components to a switch hub...  But following the ePLC guidelines, the IP Address showing on the controller is 172.16.132.111 I change the IPV4 IP Address on the PC settings to 172.16.132.10 and the subnet to 255.255.0.0 but the Adept IP Address Setting Tool on SYSMAC doesn't detect the Robot IP Address, also i tried ipconfig on command prompt which shows a different IP Address IPV4 169.254.197.75 and subnet of 255.255.0.0, I changed the previous setting on the PC setting to 169.254.197.10 with the same subnet. But still PC doesn't recognize. I tried both configurations if ACE Software can detect it but the same ACE can not detect it also... Appreciate any thoughts on what's wrong in my configurations. Thank you.
  24. Hi all, I uploaded SW from working PLC NJ301 1100 v 1.9. Uploading worked, but when I tried to open program, all rungs were empty (see picture). Does anyone know the cause?
  25. Hey Guys, I'm somewhat new to Data logging so try to bare with me. I'm trying to setup Data logging in Factorytalk View SE to log to my SQL database. I have created the 32-bit ODBC system DSN. Created the datalog model in FT View Studio and selected ODBC and it created my tables fine (Float, String, Tag). I chose Login required. I also setup a File backup path. With that being said, when I use the command DatalogOn- It will start the Datalog model without any errors, but will only log to the backup path. It isn't logging anything to my SQL DB. I thought it could be the firewall blocking it so I created a rule to allow connections through the specified port. SQL is also allowing Reading/Writing.  Let me know if you guys have any suggestions. Thanks!