Search the Community

Showing results for tags 'factorytalk - studio5000 - communication - version'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 285 results

  1. Is there an easy way to copy an Excel table into a string array in RSLogix? instead of doing it one by one?

  2. Check serial connection to Omron PLC

    lironhallak posted a topic in Omron

    Hello, I am building an application in CitectSCADA and I want to communicate with an Omron Sysmac CS1G. The connection between the plc and the Citect computer is through an ethernet to serial adapter (the computer doesn't have com ports on board). I'm having some difficulty establishing the communication and I want to make sure that I can actually reach the plc. Is there a way to check that the computer can reach the plc over the serial connection without using CX programmer? Maybe using Hyper Terminal, Putty or something similar. Thank you, Liron
  3. I am having a very weird issue that Rockwell was not able to help with.  I have a new SE application that I converted from RSView32 and I re-wrote some VBA code associated with the project.  The code works fine on the server while the screen is running in studio.  Once I deploy a Client it no longer works.  It just sits there like its waiting for my trigger to go off, but I am seeing it sit there with a 1 so i know it should be executing the code because as soon as i open the screen in studio and press play the code executes and my data is there.  Does anyone have any ideas for me?   Thanks

  4. InTouch Comms

    Sabih posted a topic in HMI & SCADA

    Hi Everyone, I've just installed InTouch V10 and am trying to develop communication with Emulate5000, for educational purposes. I looked over the internet and found some videos on how to develop communications by setting up the topic name and node name in DA Server manager, but the issue I'm facing is that my SMC only shows logViewer and nothing else (snapshot attached). Am I missing some vital component or dirver? Or is there some problem with my installation? Help would be much appreciated.   P.S: Window Maker and Viewer are working fine. Thanks, Sabih
  5. hello expert i want ask some help So i tried to communicate my Omron PLC (cj2m cpu31) with SCADA from Schneider (power logic) on my omron side the comunnication on PLC already take to communication to NB so i add communication module CJ1W-SCU41-v1 I want asking how to open the communication if i want the scada become a master and my plc become slave i got this from omron website is that program compete for my case? i need configuration for scu41 module also to communicate or if you have suggestion i really open i just need to open port RS232c from scu41 so scada can read the data from my plc  tahnkyou for your help MRTU_CPU_Slave.zip

  6. Siprotec Relay 7sj62

    ranakki_99 posted a topic in Siemens

    I have 24 Siemens Siprotec relay(7sj62) which i want to communicate with Scadapack 330E (Schneider) on 103 Protocol. but every time I try to communicate it shows Slave device is failed to communicate. trying to communicating via serial (RS-485). What should i do..?? or do i need to communicate it with Siemens PLC..?? If so which PLC should use..??
  7. Hello, i want to connect my PC to the PLC(RSLogix5561)  over TCP/IP. In rslinx the Ethernet driver are configured. My PLC IP Adresse is 192.168.1.100 and my PC Adresse is 192.168.1.105. From my PC i can successfully ping the PLC IP Adresse, but from the PLC i can't see my PC. And it does'nt schow in RSlinx. Is there anything i am missing?
  8. Hello there, I am new to OMRON so need some help to communicate two PLC over FINS.   Here are the description of the system... (IO Table image is attached)   PLC1-  CJ2M-CPU33 IP- 10.113.218.34 SUBNET-255.254.0.0 UNIT NO - 00 (set the dial available on the CPU in HEX) NODE - 22 (set the 2 dials available on the CPU in HEX) PLC2-  CJ2M-CPU33 IP- 10.113.218.35 SUBNET-255.254.0.0 UNIT NO - 01 (set the dial available on the CPU in HEX) NODE - 23 (set the 2 dials available on the CPU in HEX)     Now, what i have to do is to transfer the D100 to D110 from PLC1 to PLC2's D200 to D210 and Transfer the D100 to D110 from PLC2 to PLC1's D200 to 210.   I have tried RECV and ECHRD blocks but didn't succeed yet.   Two CPU are connected over ethernet via a industrial switch.   Can you help me to achieve data transmission please...
  9. Hello, I'm new in this forum and I signed up because I have an issue that has been frustrating me over the past few days. My problem is the following: I need to find a way to have a clock that can be out of time 7 hours. For example, I am counting parts on a machine, the machine starts counting at 7AM on day 1, so I need that part count to continue counting until 7AM on day 2. If I use GSV, at 00:00 it starts on day 2 and the log is to be stored on day 2, I need it to be stored on day 1 until 7AM on day 2. I hope I have explained myself correctly. Do you know of any way to do this in ladder logic? Any help would be appreciated.
  10. Good day, We are running FactoryTalk View SE (Network Distributed) version 7.00 (CPR 9 SR 6). We have 5 machines: Engineering Station, HMI/Data Server A, HMI/Data Server B, Operator station A and B. The FT Directory is located on Server A. Server A is Primary and Server B secondary. I made some changes to one of the HMI Display's and added a HMI Tag with an alarm.  Tested the changes, everything worked as predicted. I then checked the status of the RSLinx, HMI and Data servers using FT Administration Console, everything was running with full redundancy. I then selected Replicate to Secondary, the replication was successful and Server B rebooted. After Server B finished rebooting, I check the status again. I found that the RSLinx and Data servers started up and was again fully redundant but the HMI Server showed that Server A was active and Server B was Ready to provide service, left it for about 10 minutes but it never changed to Standby.  I rebooted Server B again to see if it will help but it did not. I then stopped the services on Server B, deleted the HMI Project, restored the project from a backup of Server A, but still had the same issue. I am suspecting that there might be an issue on server A because if I open FT View Studio on the engineering station, I get an error stating: Unable to open HMI Server. I have checked all network connections and everything looks fine. Is there someone that may be able to assist me? 

  11. HMI and PLC Communication problem

    Zubair Ahmed posted a topic in Mitsubishi

    hi there. .. i am new to plc programming.. Right now i am having problem related to communication between hmi and plc.. i have HMI WEintek 6070ip and plc mitsubishi FX2n.. i have written a program in gx developer . and communicate it with EASY Builder for HMI. so for now plc is communicating with my program written for hmi on pc. but when i downlaod to hmi and connect plc cable to hmi then hmi shows no plc communication. i am having a problem for communication between hmi and plc. any help will be a life saver. thanks in advance
  12. Hi everyone! I got this machine with a CP1H PLC and NS8-TV00B-V2 as PT. I was told that they were working fine, but suddenly, It appeared a communication issue: black screen and "connecting..." at right bottom. I dont know if It is a configuration problem or some hardware damage.  These are the configuration in the PT and the PLC. The communication is through RS232 Serial.  I tried to communicate another PT screen with the same communication settings and IT WORKED!. ' I've been thinking that, perhaps, the serial port A is damaged, I have tried to set port b, but I havent could. How can I configurate PORT B??   THANKS...  
  13. Hey all - I am working on a car wash system design that will utilize the Nayax payment system. Has anyone utilized them? How do I incorporate the device with PLC to automate the system. After payment is approved how can I send out that signal from them, all via ethernet on a managed switch w/ wifi for exterior comms for the Nayax.
  14. Hi All, Hope you all doing well in this pandemic life.  I would need your expertise with an issue I have been struggling with for past few days and thought to reach out here. I am working on a migration project with GE PLC and Citect SCADA 7.10. The GE PLC is migrated to ControlLogix L74 Rev24.10 while Citect SCADA is retained. For testing I only have L71 and L82 and could not managed to organise L74. When the code the loaded in L71 and connected to Citect, I cannot see tags in Graphic page but I see the subscription.txt in Debug folder shows all tags good . The same code when loaded in L82, the Citect works instantly.  Does anyone know this behaviour of PLC and SCADA? Regards, DeeEngr    
  15. Hi All I find my self in the middle of a project where i am required to use 12 sew movigear motor/vsd's controlled over EtherNet IP by a Rockwell 5069-L330ER.  I dont have any expirence with these and as such was wondering if any one here has any pointers or better yet, a sample program that i would be able to go through to help teach me.  I have gone through the manual however im still a little confused as to some points. I would like to be able to start, stop and control speed, acc, dec ect like i can with a Powerflex 525 if its possible.  Trevor
  16. Hello all,   My coworker is running into an issue where his version of Sysmac Studio has been updated, but this is causing a version mismatch from an existing project.  He has called Omron, and they are saying that there's no way to downgrade the OS.    Project operating system version = 7.4.0 Device Operating System version =  7.3.0   So the OS on the NA5 would need to be upgraded to match the version of Sysmac.  Does anyone have any suggestions to revert the automatic upgrade that has occurred? Any help would be appreciated!

  17. INFO

    NANI posted a topic in Siemens

    Dear sir, I am working in container terminal, we have Siemens plc  s7-300 , Bromma spreader with SCS-3( codesys software) spreader field device sensor (ifm) connected to slave ifm CR9011, now a days we are facing too much issues in scs-3 so we planned for isolate the SCS-3 but we want to know ifm module Cr9011 how to communicate to Siemens plc  7 how to write in hardware configuration. can you please suggest us.  
  18. Sorry if this is covered elsewhere, but my search hasn't revealed anything yet.  I have a number of PanelView graphics created with FactoryTalk View ME and some use a lot of Parameter Files, which link to popup faceplates. So a large number tags are represented with parameter files, which, when clicked on screen, then pop-up an appropriate faceplate, based on tag type or category etc.  I am still digging into the very elaborate FT View ME manual, but at 500 pages, that's quite a deep study.  But I don't see the linkage between the tag's parameter file and how it specifies which faceplate to pop up, and I've not yet found a good article other than keep digging into that FT manual. There does not appear to be a linkage entry in the parameter file itself, where I would have expected it.  Nor do I see any "hot spot" click type event code in the display itself, which would also make sense.  Is it in the PLC code itself?  I would not have expected that, since they seem to be keeping the FT environment self-contained. But there must be some sort of table or linkage somewhere that I'm over looking. Thanks in advance for anyone's thoughts & guidance on this.  Other parts of FT HMI screen development does seem intuitive, just not this dynamic linking.
  19. How can I determine if both my Produced and Consumed tags are communicating with each other, and if have the right set of tags since I forgot how I named them?  Is there a way to confirm that both my P & C are communicating.
  20. I have IPC and need to detect status of IPC and PLC communication . I need help with the same that how can in detect it ? Is it possible with message instruction ? if it is then how ?
  21. Can anyone help me with the issue in the picture? We have the correct version in place yet it gives me a version error stating it needs the version that is installed. Doc1.docx

  22. CP1L-EL TCP/IP with VideoJet Printer

    littledaus87 posted a topic in Omron

    Hello, My previous topic was want to establish communication CP1E --> Videojeet Printer using RS232 serial cable. this project test SUCCESS. by the way distance from printer and PLC was very far almost 500meter. so printer technical team request to use tcp communication using cat5e cable. Problem: 1. I'm using TCP communication protocol that need me to have open,send,receive,close port. 2. Communication testing with PC Hyper Terminal --> OK but HT need in waiting call mode, i don't know why. 3. Using printer no result show. how i'm suppose to know communication already establish? 4. Communication setting on PLC Setting-Built in Enthernet need to add other communication device.? here i'm share some programs to give more understanding. Thanksm TCP with printer.cxp
  23. Hello. I am trying to make a serial RS 232C connection between Schneider Magelis HMIGXU3512 and Omron PLC CP1E. However, there seems to be a communication problems between both of the equipment. I am using cable XBT Z9740 for the serial communication cable. The format used is 8.2.N for both equipment. The baud rate is 115200. No Flow Rate is choose. Anyone can help with this kind of problems?
  24. Hi All, Am trying to communicate and make In-Sight bar code reader to trigger through MicroLogix 1100 with RSLogix 500.  Does any have any info as to the steps to follow. Most of the info I saw and have tried were for SLC processor In fact, I created the String file ST10:0  for the target device as was mentioned in one of the posts but when I complied it there was error saying that St10:0 was not supported by the module. Please see attached file. Any insight will be appreciated  

  25. LOCAL MELSEC COMMAND

    Ctor posted a topic in Mitsubishi

    Hi everybody,  Is it possible to send MELSEC commands to oneself, locally, not using the phiysical ports? I would like to use some commands described in the "Communication_Protocol_Reference_Manual_(MELSEC)" to get some self-management functions in my PLC.  For example, in OMRON this is possible using CMND instruction and setting the FINS address to 0.0.0 in the parameters of the instruction. Thank you very much.