Search the Community

Showing results for tags 'example programm for encoder read in sysmac studio'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 340 results

  1. Dear all. I have the issued with Sysmac Studio 1.30. it can not show the Library setting and Library create. just show the reference only. can you pls help me this issued. Many thanks.
  2. Hi there I am working on a project where Omron servo drags a part to a certain position using belt mechanism, But to avoid any slippage we decided to put an external encoder directly on the part. I was wondering what is the best to approach to drive the servo using the position of this external encoder. Is there any way that it can be configured directly with the servo? I am fairly new to coordinated motions, any help will be appreciated. Thanks
  3. Hello, On our DCS we have a button that will open an RDP connection to our PLC server and open the .mer file connecting the DCS to the PanelView HMI. This is supposed to be used for troubleshooting purposes only, but that is not the case. Is there a way to prevent operators from operating the HMI through the RDP while still allowing them to have read only access?   Thanks, Michael
  4. I am looking help with an issue I have trying to connect to a 5370 Controller 1769-L33ER. The controller firmware is 20.014 and my studio does not have 20.014 firmware. I have downloaded the firmware and do not know how to get it extracted to my PC. Any help with this will be grateful.  Regards
  5. How do I communicate between an Omron NX1P2 Automation Controller and Indusoft Web Studio. This is the first time using an Automation Controller. I am familiar with communicating between Omron PLC's and Indusoft using OMETH drivers. What driver should I use?
  6. Dear Colleagues,   I require some help with regards to setting up virtual machines, We have some ControlLogix 1756 PLCs scattered around site running on different version (v20, v21 & v32). My company requires all software installations on company computers to go through IT. Installing all these versions on single PC is really a pain (going through IT)  for new hires and for new PCs. I am trying to suggest using virtual machines for each version that can be shared/distributed among the engineers and also to give engineers some autonomy in the VM environment.    How do I go about this especially with respect to licensing without violating the terms of use both the operating system and the automation software? 
  7. Dear All. I have the issued with NX1P2 when read data from Modbus RTU. the Slave data using 2 INT for Real data. but in the Sysmac Studio I get the data is OK, 2 INT but can not convert to Real data. Can you pls help me to solve this issued. also I want to convert from Real to 2 INT to send the setting to salve. Many thanks.
  8. Crane Positioning

    Hey folksI'm trying to make a Ladder program in Sysmac Studio to control a Crane.The crane gets via a HMI a position that it must drive to, first at high speed then in low speed this is controlled via encoder signal for fine positioning there are several sensors.For all this I have an NX1P2-9B24DT1, NX-EC0222 and 3G3MX2-A4030-ESomeone here who can help me with an example of how this can be done in Ladder.Many thanks in advance for your help.
  9. Friends kindly help me I need to create ton and counter macro function in factorytalk view studio 
  10. How to scan Ethernet/IP network?

    Scenario: You show up on site and the only knowns are Omron PLC and EtherNet/IP network. You have a laptop loaded with CX-One, an ethernet cable, and the ethernet port that is connected to a known EtherNet/IP Omron network (you can not see the PLC). I have previously worked with Siemens systems and used Primary Setup Tool and Proneta with wonderful results. Do similar tools exist for an Omron environment?  Question: How to (relatively quickly) scan an EtherNet/IP network for connected devices without knowing their ip addresses?  
  11. Hi. I have a decent workstation I work on when i do my programming. I have been using Sysmac studio for couple of years now and I have always notice it that sysmac studio is very slow.   Have you guys notice that sysmac in general is slow ? /Best regards.
  12. Hey Guys,  So i am working with Omron software to integrate it with the HMI screen.  Whenever I receive a user alarm, I have an acknowledge button on the screen, but when I click on it,  the alarm does not go away from the screen,  it is acknowledged though.    Can anyone please guide me to what changes I have to make in the system to make the alarm notification go away, or is this any sort of a bug in the Omron software ??   Please help guys !!!
  13. Is it possible to reset " Motor replacement detected error" ( Error code 95.01) using code without connecting to PLC through sysmac studio? If yes please suggest how to do it... Thanks in advance...
  14. plc mtsubishi r series and rj71c24-r4

    hello, im working with r04 mitsubishi plc with rj71c24-r4 in modbus rtu mode, i need to read and write PM1200 scheneider values, but i have problems, is my first time with this model and very different than fx5u model, i working in GX works3 someone who can guide me, I would appreciate it too much
  15. Hey everyone, I did a quick search in here and couldn't find the answer to my question, so I'll post it here.  I am starting up a machine and adding/correcting alarms on the fly and came across an issue.  Some how a Internal variable  in one section of ladder has the same name as my global variable that I need to use and now I cannot put the global tag in that file.  Is there a way this can be done while the PLC is in run mode or do I have to go off line, delete the internal variable, add the global variable and then redownload?   PLC is NX100    
  16. Hello I am trying to get for HAAS CNC variables eeg. 10800,10801 etc into the PLC. Does anyone know of any ADD ON instructions ?    Thank You 
  17. Hello Im trying to read from my PLC but i cannot see the program file.  However, if i try to compare it using other file program, i could see the program file. Is their any restriction in my software?
  18. Hello All, I am new to Studio 5000. I am trying to have my limit sensors energize my stop output, and also have a manual bit that I can toggle that will energize the stop output as well. Currently, toggling my manual bit works for energizing the stop output, but my limit sensors turning on does not energize my stop output. Not getting what I want with or without the ONS. What is going on??? Thanks, Daniel
  19. Hello There, Hope you are safe and Healthy. I am using Omon "CP1L-EM40DT1D" PLC controller for a cut-to-length type of application. for the measurement of length, I am using an inbuilt high-speed counter 0.   Now the problem, when the status of PLC changes from Power off to Power On the high-speed counter starts from 0. How to hold the pulse value of HSC0 at power restart ?    (I am using Differential Rotary Encoder, not absolute)
  20. HI guys,now i have " unable to determine the size of the file C:\users\public\document\RSVIEW ENTERPRISE\ME\HMI\PROJECTS\abc\tag\abc\.mdf. " this error shows...please give some help
  21. Hi guys, I am trying to open an application and i keep getting this error. Failed to initialize the service: {3F883B87-2208-11D4-B0E7-001083022E04} Does anyone know how to get rid of this error? Regards,
  22. I don't suppose there is anyway to modify the popup Alarm Notification?  I know you can press the Acknowledge and get it to clear...most of the time, but it always seems to be right in the way when it does pop up.  I can move visual data to a different part of the screen that I want to see when an Alarm appears, but I'd rather be able to move the Alarm Popup or Resize it all together....   Thanks,
  23. I have inherited a program to work on using MAM motion commands on a CompactLogix 5370 processor. The MAM variables for some parameters state that REAL data type is required. However in looking at the the code those REAL variables are actually declared as DINT. Is this OK. Does Logix somehow accept DINT for these parameters even though REAL is specified. So if parameter is 5600 DINT it somehow interprets this as 5600.00 REAL. Confused!
  24. Hello all, I need to read device memory mostly I need to read R registers from PLC L26. I read device data, but inside of table, I can't find R or ZR registers. Can you help me?  What I did wrong?   BR KS