Search the Community

Showing results for tags 'event logging in factory talk view se v8.0'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 97 results

  1. Hi! A have a question about how can I send the current User data from the Panelview (HMI) to the PLC. Its an allen bradley PLC 1756 L71. In the Factory Talk view I tried to make a register and to move in it the current user, but unfortunatelly its not working. Is anybody here who can help me with this ? Thanks ahead. Br.
  2. Dear automation friends,   I just like to put some issue in the clear that I have seen no reported issues on yet, but it is killing me. Maybe some other people in the world also have this issue. We use Windows 2016 on FT View v10. All patched with all compatible patches (both Windows and Rockwell). We install this software a lot but we only got this issue seen/reported on windows 2016. I never had a Rockwell issue that took so long without getting it fixed. Support is also not really helping.   We just have a setup of Windows 2016 with 2x redundant FT View Servers and about 10x Clients with each 4x screens. The HMI clients run perfectly but every few days, 1 application (on 1 of the 4 screens) just crashes "DisplayClient.exe application crash...". That closes the HMI interface and then the users needs to click on the hmi.cli file to launch that screen again. Refering to ntdll.dll in the windows events. No additional info except for the windows error reporting that is unable to contact the internet to send the crash report. Looking in the FT Diagnostics, it happens while the operator is operating the hmi screen. Not when there is no activity.   We reinstalled 1 client completely from scratch, including the OS, domain integration, everything brandnew. And 10 hours later: crash on 1 of the 4x screens. In a control room with almost 30 screens, this is very annoying and unacceptable.   If you have a similar issue or got the issue fixed, please let me know. If you have a similar issue and don't have it fixed, we can share more detailed logs.   Best Regards,
  3. Hello Guys! I have a problem what I can't really solve. In factory talk view (10.0) I wanna use a momentary push button. When I start the project, and I click on it nothing happening, the button activate only when I release it. Its like there is an OSF instruction inside.  I want the button activate until I push. May I use a wrong button ? Could you guy please help me with this? Thanks ahead.
  4. Hi, Is there a way to write an Event Name to a string variable in Sysmac Studio? I'm using a NJ-301. My problem is that I can detect that there is an error and get the Error Code using functions GetECError, GetMCError, GetPLCError, etc, but I want to get the Event Name associated with the code (in a string variable), to display that string on an HMI (not from Omron). Is this possible?
  5. Hello, I'm a little experienced, a little new with (I hope) a fairly beginner question. I've got a customer that has a pre-existing HMI running a Factorytalk View SE - Network program.  The customer would like to make some changes to the HMI, and I feel pretty confident that I could do this; the only problem is I'm having difficulty connecting to their system and downloading a version of the program that I can edit. Almost every How to video and instructional PDF that I can find appears to start from the premise that I created the program and have an existing copy on my computer or am starting from scratch, but that is not the case.  I know the IP address of the Networked PC that is running the HMI and can ping it etc, but I do not know how to connect to it.  I even have a copy of almost all of the files that the PC is running from the customer, but do not have a file that I can open in FTView to edit or change then download; I think I'm missing the .cli file or somesuch? Do I have to be directly logged on to the PC or can I be on my programming laptop and connect via Ethernet->switch->PC (I think I need FactoryTalk Linx for that, which I have a licensed copy of)?  I know that Machine Edition requires a .mer file to be able to open and edit an HMI program, is the network edition the same? Any help would be greatly appreciated!
  6. Hello, has anyone had success in creating a wedge with borders that change due to its assigned tags? Attempting to create a range on a gauge using wedge, but am unsure how to approach this considering it wouldn't be rotating the wedge around a point but rather changing the size of the wedge. 
  7. Hi there! This is my first time using Rockwell automation software and I have some questions I can't answer. When I'm running the FactoryTalk runtime application with a simulated controller, I get disconnected from Logix Designer, so I can't online watch the program. If I try to simulate using 'Test Application' in FactoryTalk View Studio, it appears to communicate, but buttons don't make any effect when pressed.   Hope you can throw some light on it! Thanks in advance!  
  8. Hi! I hope you could help me with the problem I've been having with this HMI. Usually I use the Instruction-based alarms (ALMD) in the program of my PLC Controller (ControlLogix 5580) to be able to send Alarm Messages to my View Designer Panel View. However, on this new HMI I'm getting the alarm trigger on the Panelview (I get the prompt on the Alarm Summary, and get the Alarm TAG of the ALMD Instruction associated with the alarm), but for some reason the Alarm Message is on blank. It´s the same for all the alarms on the controller. I checked again and the "Message" parameter of the ALMD is configurated, and even test just typing "a" as an Alarm Message to see if it was that the string was too long, but even with that the message didn't show up. Can you help me understand what I'm doing wrong?

  9. File Transfer Protocol

    AndrewJ1 posted a topic in Mitsubishi

    Hello I have a FX5U PLC that is performing some data logging (D-reg and Bit) through the CPU module logging configuration tool, sample time of 5 minutes. Currently the client is physically swapping the SD cards to retrieve the data. I wish to set up a File Transfer Protocol function to transfer the logging data to the C drive of a local PC. They will be connected via ethernet cable through a network switch but independent of any other networks or internet. Desired function of FTP: 1.      Data transfer every 24 hours 2.      Confirm SD card not in use (either pause logging function or carry out in between 5 min samples) 3.      Read logging data from SD card 4.      Write data to local drive on PC 5.      Delete transferred files from SD card to leave capacity for further logging operations 6.      Data logging instruction file (.llp) must be left on SD card 7.      Recommence data logging function I have configured the PLC as FTP Server and managed to view the contents of the SD card through windows file explorer on laptop with limited success (connection is intermittent and when access is possible, it does not always show updated/latest SD card contents) Is it possible to achieve the automated FTP using Mitsubishi and Windows software or do I need 3rd party software as well? Any advice on this would be hugely appreciated.   Many thanks.

  10. Unable to delete a screen

    lqu@edgeautomation.ca posted a topic in Allen Bradley / Rockwell Automation

    Hello AB professionals, I am using FactoryTalk View Studio v11. I am basing on an old project to build my application. I restored the project from a .mer file. I deleted or renamed some old screens, saved and closed the project. But when I open the project next time the screens I deleted still show up. When I click on it it will show an error message "Component does not exist".  In the FactoryTalk ME application, I right click a screen name on the left tree under the Graphics, and then click "Delete" or "Remove", the display would disappear at that time. But it persists on coming back next time I open the project. If you know the solution to resolve please reply. It is much appreciated.   Thank you. Lei
  11. Hello! I have been working with a Factory Talk Studio V8.0 and my computer was crashed, "blue screen". After this, I can not open my panel project anymore, I only get information Failed to open factory talk private directory for the application. How to save my project?  
  12. I am starting an upgrade process for all my SLC50* PLCs and working out the communication of my machines for the upgrade. I ran into this complication I don't understand. I have 2 machines that work together using 1 HMI. Both machines have their own PLCs. Both are running SLC5/02 to 1747-AIC link coupler then to the 2711P-RN6 interface with the DH-485 communications running parallel. I don't understand how this works, or how I might possibly upgrade the communications from 2 PLC's into 1 HMI without linking the PLC's programming first. (Also, a complication I am working on, I only have the Runtime file, not the ME file for the HMI program). 
  13. Good day,  I retreived the event log from 2x RM's today, I found on the one RM that there has been more than 700 million events. Apart from switchover events, there following event shows up a lot: (C2) Bridge Connection Deleted       Starts/Stops   Byte 1 (0xFF) : Byte 2 (0xFF) : Byte 3 (0xF2) : Byte 4 (0x13) : Byte 5 (0x0) : Byte 6 (0x0) :  Our system: 1756-RM2 1756-L75 1756-CN2R 1756-EN2TR 1756-EN2TR 1756-EN2TR 1756-EN2TR The CN2R's are connected to 12x 1771-ACN15 and 2x 1756-CN2R in remote racks, which is also set up to be the keepers. The EN2TR's are connected to their respective ETAPs/EN2TR's in ring topology.   We have experienced some issues when switching over. Hope someone can tell me what that message means regarding the Bridge Connection.    
  14. Hey guys,   I know this is a topic that has been discussed before, but I am having trouble finding exactly what I am looking for.. I want to know the most efficient way to record data from my PLC to an Excel file on my PC. I want this to be done without the use of the PLC's webserver.  Specifically I am trying to record vfd speed every 10seconds with a time and date stamp. How can I do this?   Thanks, James  
  15. I have a global sidebar that has all of my page navigation buttons.  Is there a way to hide a certain button based on the current page that is displayed (i.e. "Manual" button is invisible when the Manual screen is displayed)?  I know how to make a button visible/invisible based on a tag or expression, but I don't know how to do it based on the current page.
  16. Dear friends.. I want HMI panel view 300 software.. Is this available in net or free of cost in web sites
  17. Hi, One of my employee just factory reset our main HMI Panel, we don't have the latest backup. Is there a way even paid to connect to the device (KTP1200 Basic) and restore the latest version? Maybe there is a few days where the data is still available on the device and we can take a pc and try to get it back?? Thanks
  18. Friends kindly help me I need to create ton and counter macro function in factorytalk view studio 
  19. Hello All   I have 6 x SLC5/03s that I am trying to connect to a windows PC that is running FactoryTalk View Studio Enterprise. To do this I have connected Serial to Ethernet gateways (MGATE EIP3170) to each CH0 serial port of the SLC5/03s. The EIP3170s are connected to a switch that has the windows PC connected to it . The EIP3170s and the PCs are all on the same subnet. In FT View SE I have added 6 x Serial DF-1 drivers for each SLC5/03. When I add the drivers, I can see three of the SLC5/03s. If I try to add any more Serial DF-1 drivers I loose communication with all of the SLC5/03s and the diagnostic window in FT View SE I see the following error message: DF1: Failed to open '\\.\COMx', error = 0x000005AA. When I phoned Rockwell Automation what this error message means they told me it is a "Fatal access error" which means that the EIP3170s are incompatible with FT Linx.  Does anyone know if it is actually possible to connect more than 3 EIP3170s to FT Linx? I am sure I have seen an article on how to do this but I can't seem to find it again
  20. Hi all, I am using alarms to generate reports through sql . But sometimes my alarms are getting missed and due to that my reports are not getting proper expected output. My alarm bit is almost high for 3 to 6 seconds , however i have observed that its getting missed . I dont know why . In below image after @22.41.03 the next snap should have been captured around @22.41.33 Instead of that it captured @22.42.03 have anyone faced issue with alarm missing issue? Any suggestions would be very helpful.   Thank you.

  21. GT Designer got2000 device address

    Scotttin posted a topic in Mitsubishi

    Hi all. This is hopefully an easy fix. I have words and bit values in a recipe that I am trying to show in a logging file. I can get numerical values to show but I can't get the word devices from the recipe to show up on the logging file. Eg my devices from recipe set as a string starting with device gd60120 and in the logging file I want gd60120 to show the word, they are both set as unicode.  
  22. I have a display I use to show overviews on several big tvs in our plant.  Up to now I have used a single display and change which display is visible based on tag that increments based on a timer.  This has worked great but as my system grows I keep adding additional "blocks".  I have now ran into the issue that you can only have 3000 tags on one display.  While i only display one block at a time all of them load so that pushes me over the limit.  I am guessing I need a vba script to accomplish this .  If someone has done this I would love to see some VBA examples of what you did.  Or other ideas...
  23. NX or NJ Data Logging Function Block View File This function block allows users to log data to a .csv file on the SD card of an NX or NJ CPU Submitter PMCR Submitted 09/06/19 Category Omron

  24. Data Logging with GT Designer3

    ThePLCPeon posted a topic in Mitsubishi

    Hello, I am trying to log data using GT Designer 3 and I'm having no luck. I found some sort of online documentation and even going through the myriad of steps still find my self unable to log anything. I am using the melsoft project navigator and GX Works 2 to simulate the logging of just one 16 bit signed word with a constant value. As logging data is clearly not as simple as just specifying D100 or D200 as the devices you want to log, I am hoping someone else on here has some experience on this matter and can help me out.  Thanks for any help in advance.
  25. My Compact Logix PLC is connected to my computer by USB. When I try to create a new view designer file, I can not connect my view designer with my controller. "OK" button of the HMI to controller path remains INACTIVE. Please see the attached.  How can i solve this issue?