Search the Community

Showing results for tags 'ethernet communication'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 293 results

  1. Siprotec Relay 7sj62

    I have 24 Siemens Siprotec relay(7sj62) which i want to communicate with Scadapack 330E (Schneider) on 103 Protocol. but every time I try to communicate it shows Slave device is failed to communicate. trying to communicating via serial (RS-485). What should i do..?? or do i need to communicate it with Siemens PLC..?? If so which PLC should use..??
  2. InTouch Comms

    Hi Everyone, I've just installed InTouch V10 and am trying to develop communication with Emulate5000, for educational purposes. I looked over the internet and found some videos on how to develop communications by setting up the topic name and node name in DA Server manager, but the issue I'm facing is that my SMC only shows logViewer and nothing else (snapshot attached). Am I missing some vital component or dirver? Or is there some problem with my installation? Help would be much appreciated.   P.S: Window Maker and Viewer are working fine. Thanks, Sabih
  3. PC to PLC Kommunikation

    Hello, i want to connect my PC to the PLC(RSLogix5561)  over TCP/IP. In rslinx the Ethernet driver are configured. My PLC IP Adresse is 192.168.1.100 and my PC Adresse is 192.168.1.105. From my PC i can successfully ping the PLC IP Adresse, but from the PLC i can't see my PC. And it does'nt schow in RSlinx. Is there anything i am missing?
  4. Hello there, I am new to OMRON so need some help to communicate two PLC over FINS.   Here are the description of the system... (IO Table image is attached)   PLC1-  CJ2M-CPU33 IP- 10.113.218.34 SUBNET-255.254.0.0 UNIT NO - 00 (set the dial available on the CPU in HEX) NODE - 22 (set the 2 dials available on the CPU in HEX) PLC2-  CJ2M-CPU33 IP- 10.113.218.35 SUBNET-255.254.0.0 UNIT NO - 01 (set the dial available on the CPU in HEX) NODE - 23 (set the 2 dials available on the CPU in HEX)     Now, what i have to do is to transfer the D100 to D110 from PLC1 to PLC2's D200 to D210 and Transfer the D100 to D110 from PLC2 to PLC1's D200 to 210.   I have tried RECV and ECHRD blocks but didn't succeed yet.   Two CPU are connected over ethernet via a industrial switch.   Can you help me to achieve data transmission please...
  5. Hi,I am connecting several computers and NS12 HMIs with a CJ2 PLC using EtherNet/IP protocol. And I would like to know the FINS Address (Net.Node.Unit) of the HMI and the computers.I would like to use the FINS Write Access  Log Read (21 40) command to detect some commands from the HMIs and from the computers, however I am not sure how to differentiate the origin of each write access because the FINS Address is not related with the IP Address, in fact, different devices are using the same FINS Address. I suppose I need to fix their addresses using an IP Address Table. Right?? Anyway, I only know to do that with UDP, but I don't know how to do that under Ethernet/IP.Thank you.
  6. HMI and PLC Communication problem

    hi there. .. i am new to plc programming.. Right now i am having problem related to communication between hmi and plc.. i have HMI WEintek 6070ip and plc mitsubishi FX2n.. i have written a program in gx developer . and communicate it with EASY Builder for HMI. so for now plc is communicating with my program written for hmi on pc. but when i downlaod to hmi and connect plc cable to hmi then hmi shows no plc communication. i am having a problem for communication between hmi and plc. any help will be a life saver. thanks in advance
  7. Net.Node.Unit on EtherNet/IP

    Hi, I am connecting several computers and NS12 HMIs with a CJ2 PLC using EtherNet/IP protocol. And I would like to know the FINS Address (Net.Node.Unit) of the HMI and the computers. I would like to use the FINS Write Access  Log Read (21 40) command to detect some commands from the HMIs and from the computers, however I am not sure how to differentiate the origin of each write access because the FINS Address is not related with the IP Address, in fact, different devices are using the same FINS Address.  I suppose I need to fix their addresses using an IP Address Table. Right?? Anyway, I only know to do that with UDP, but I don't know how to do that under Ethernet/IP. Thank you.
  8. Hi everyone! I got this machine with a CP1H PLC and NS8-TV00B-V2 as PT. I was told that they were working fine, but suddenly, It appeared a communication issue: black screen and "connecting..." at right bottom. I dont know if It is a configuration problem or some hardware damage.  These are the configuration in the PT and the PLC. The communication is through RS232 Serial.  I tried to communicate another PT screen with the same communication settings and IT WORKED!. ' I've been thinking that, perhaps, the serial port A is damaged, I have tried to set port b, but I havent could. How can I configurate PORT B??   THANKS...  
  9. Hey all - I am working on a car wash system design that will utilize the Nayax payment system. Has anyone utilized them? How do I incorporate the device with PLC to automate the system. After payment is approved how can I send out that signal from them, all via ethernet on a managed switch w/ wifi for exterior comms for the Nayax.
  10. Kinetix 300 Ethernet/IP Locks Up

    I am trying to use an Automation Direct Productivity P2000 to control a Kinetix 300 servo drive using Ethernet/IP.  I got the EIP working fine using Explicit Messaging.  The hardware enable and overtravel limits are hardwired ON.  The drive doesn't show any faults.  When I turn on the software ENABLE bit (bit 7 of byte 0 in the Output Assembly), the Ethernet communication stops.  Motionview continues to work, but if I disconnect and reconnect, it can't find the drive.  I have to physically power down the drive to reestablish Ethernet communication.  Once I power back up, EIP communication resumes with no issues. Any thoughts?  What am I missing?
  11. Hi All, Hope you all doing well in this pandemic life.  I would need your expertise with an issue I have been struggling with for past few days and thought to reach out here. I am working on a migration project with GE PLC and Citect SCADA 7.10. The GE PLC is migrated to ControlLogix L74 Rev24.10 while Citect SCADA is retained. For testing I only have L71 and L82 and could not managed to organise L74. When the code the loaded in L71 and connected to Citect, I cannot see tags in Graphic page but I see the subscription.txt in Debug folder shows all tags good . The same code when loaded in L82, the Citect works instantly.  Does anyone know this behaviour of PLC and SCADA? Regards, DeeEngr    
  12. Hi all, after my complaing about my lack of network access in the workshop ive been tasked with fixing this so ive have some general questions about networking and concerning Ewons so this network will be used for connecting ewons to test products as well as general computer access the plan is to have 7 computer access points as well as 2 points to connect to product lines for testing my intial thoughts were to run 2 cables from our network to 2 routers, 4 computer access points and one line testing connection on 1 and 3 computer access points and one line testing connection on the other so first question is what type of ethernet cable should i use? i assume cat5 is fine, is it worth going for cat6 or is it just a waste of money? and should i be running crossover cable or straight through? do i need any specific routers or will anything do? will i be able to add splitters later down the line and be fine? or should i future proof a bit with more robust routers? my years of avoiding networking at uni has come back to haunt me i know the basics but thats all really thanks to anyone who can offer some usefull information i mention the Ewon units because ive been told that they need to be the only one on their connection to the network, although i dont know how true this is  
  13. Fatek PLC Communication Problem

    hy all. i am having an error while communicating with fatek plc. when i communicate it gives an error. " Com port open fail, plz check if this port is used by other programme when we online the PLC (Fatek/ WinProLadder). kindly Guide me   as it looks like port is already used by another program . and i dont know how to kill that program ..       
  14. INFO

    Dear sir, I am working in container terminal, we have Siemens plc  s7-300 , Bromma spreader with SCS-3( codesys software) spreader field device sensor (ifm) connected to slave ifm CR9011, now a days we are facing too much issues in scs-3 so we planned for isolate the SCS-3 but we want to know ifm module Cr9011 how to communicate to Siemens plc  7 how to write in hardware configuration. can you please suggest us.  
  15. Hi, I'm trying to communicate with a Keyence Laser Marker MD-X1500 through an RS232 IO module ( QJ71C24N-R2) , and i'm using the GP.OUTPUT command to send the request , and the G.INPUT to receive the Reply from the Laser !!!  No success .    ANY help will be really appreciated       Thanks, 
  16. Hello, Can anyone tell me what types of Ethernet/IP device the  QJ71EIP71 can be configured as? Explicit message server, explicit message client, I/O adapter and/or I/O scanner? I'm having trouble finding this information in the manual: https://eu3a.mitsubishielectric.com/fa/en/dl/12484/SH(NA)-081157ENG-B.pdf
  17. Produced and Consumed Tags

    How can I determine if both my Produced and Consumed tags are communicating with each other, and if have the right set of tags since I forgot how I named them?  Is there a way to confirm that both my P & C are communicating.
  18. I have IPC and need to detect status of IPC and PLC communication . I need help with the same that how can in detect it ? Is it possible with message instruction ? if it is then how ?
  19. Hi all,  I am trying to configure an Fx3ge-24M PLC using GX-works 2. I can successfully connect to the PLC using the USB cable, however i am having trouble getting a connection via ethernet. I have attached a photo that contains the only ethernet configuration that i can find, what am i missing here? I'm new to GX works & mitsubishi PLCs.  
  20. We have an application using a Mitsubishi L02CPU-P with a built in ethernet module. At one time the TCP/IP interface became irresponsive and a hard reset was required. The device is configured for binary communication and works fine using a GOT therminal and also operates fine when queried from a GX Works application. During debugging of a custom MELSEC application the TCP/IP interface stopped responding and could no longer be located using GX Works and the GOT terminal also lost contact. The L02CPU-P continued running the control application, but could no longer be contacted. The only way to recover was using the L02CPU-P reset button. I have heard developers being restrictive using the TCP/IP interface remotely over VPN and unstable connection due to the risk of hanging the device and not being able to recover without a personal visit to the device. Any experience from L02CPU-P devices requiring hard reset to come "online" again? Or does it enter some default state due to some internal exception handling?
  21. Hey all, I am having some issues with a Keyence IV2 camera which has Ethernet/IP functionality.  To summarize briefly, it has been configured and reading the data into my PLC (NJ501) into a structure data type.  The issue I'm having is that I cannot control this on a bit level for triggering the camera, etc.  I was reading that a Union type is the way to go, but unfortunately, I stopped getting data into the PLC when setting it up that way.  According to the configuration guide for Rockwell and setting it up in the Network Configurator, I needed to go with the SINT type.  When registering the device, the 8-bit option was necessary since the Input/Output sizes needed to match.  This was predetermined by the EDS file for the IV2. I am stumped as to how to get the data to read into the Union Type, and any suggestions would be greatly appreciated. Thanks, -K  
  22. Can anyone help me with the issue in the picture? We have the correct version in place yet it gives me a version error stating it needs the version that is installed. Doc1.docx
  23. Hi to everybody. I'm beginner on Beckhoff so I'm having issues with connecting Beckhoff CX8090 and Weintek EMT3070a. I'm trying to use Beckhoff TwinCAT PLC Free Tag names to get data from CX8090.  I have followed instructions in EasyBuilderPro which are pretty straightforward. On side of HMI I need to select proper settings which should be: IP: 192.168.1.2, Port no.: 48898, ADS port: 801, AMS NetID: 192.168.1.2.1.1 I have succesfully imported all variables from my PLC program into the EasyBuilderPro. For testing I tried to create HMI just to see status of few inputs. I have no issues uploading program to HMI, but after startup I get message Device no response and communication is not working. On side of Beckhoff I have settings like this: AMS NetID: 192.168.1.2.1.1 Ethernet port X001: DHCP Ethernet port X101/102: IP: 192.168.1.2   I can access to CX using input ports X101/102 and also access to HMI through same connection. I have also tried to log on to windows CE on CX and tried to ping HMI and that also went ok. Also I have tried to add static route on TwinCAT to HMI with settings AMS NetID:192.168.1.3, IP:192.168.1.3 but again no connection. So physical connections are CX8090 X101 - > HMI, CX8090 X102 -> PC. From PC I can access both devices. I'm using TwinCAT 2. Can you tell me what I'm doing wrong?   Thank you
  24. CP1L-EL TCP/IP with VideoJet Printer

    Hello, My previous topic was want to establish communication CP1E --> Videojeet Printer using RS232 serial cable. this project test SUCCESS. by the way distance from printer and PLC was very far almost 500meter. so printer technical team request to use tcp communication using cat5e cable. Problem: 1. I'm using TCP communication protocol that need me to have open,send,receive,close port. 2. Communication testing with PC Hyper Terminal --> OK but HT need in waiting call mode, i don't know why. 3. Using printer no result show. how i'm suppose to know communication already establish? 4. Communication setting on PLC Setting-Built in Enthernet need to add other communication device.? here i'm share some programs to give more understanding. Thanksm TCP with printer.cxp
  25. Hello. I am trying to make a serial RS 232C connection between Schneider Magelis HMIGXU3512 and Omron PLC CP1E. However, there seems to be a communication problems between both of the equipment. I am using cable XBT Z9740 for the serial communication cable. The format used is 8.2.N for both equipment. The baud rate is 115200. No Flow Rate is choose. Anyone can help with this kind of problems?