Search the Community

Showing results for tags 'error-1007'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 106 results

  1. I have  Modicon Micro TSX 3722 Version 1.0. while i am doing communication of PLC and PC i am getting communication Error.  I am not able to download Programm in PLC. Please find attached image of error which i am getting .   please help me to resolve it.   Thanks in advance. 
  2. Trying to log into NA HMI, NA5-7U001B  Direct, using USB or Ethernet.  All attempts failed .. tho, it was easy to log into the NJ Controller, direct, with USB or Ethernet using the same PC. Then a window popped up.. saying the firmware needed updating in the HMI, and suggested launching the "update" from the same window... Then, after a few minutes.  a "update failed" was displayed on the window.. and the HMI screen changed to this: ..and the green LED went RED ... aaaaagh!   HMI no longer works... any idea why this happened, or the failure to log in happened.. or, what it will take to fix it? Please tell me it was something Omron did .... Thanks Much, Regards, ,Michael PS:  additional info..  I was using Sysmac Studio Version 1.1 .. because I could log in to the CPU (USB and Ethernet) and not the HMI.. I changed to another PC with Sysmac Studio Version 1.17 .. Now I was only able to log into the CPU with Ethernet.. USB login failed. .. and, so did any attempt to log in to the HMI (USB or Ethernet) It looks like if you use a new version of Sysmac.. better not have a device with  "old firmware" ..  I think it was the V1.17 that presented the window suggesting the Firmware Update ...  sigh!
  3. CX process Error

    Dear All, Hi my name is arum. I am just starting my own project using CS1W-LCB01 and Omron CS1G CPU42 H, and i am using CX process to program the LCB01. The first time i try the LCB, it was doing well, no error occurred. But now, I have some problems here. 1. Internal board error always appear 2.Error 0A0D was detect when i am try to download the program to LCB. Iam using CX server communication driver. Because the problem always occurred, I clear the PLC memory then download again the PLC  configuration, and then restart the PLC configuration every time this problem occured After some times, it doing well. 3. But now, I even cant download the program because there always communication timed out Anyone had experience with this case. Please give me some advise. Thank you in advanced.    
  4. Q02HCPU error

    what is this error 2200? my PLC dont have memory card I think the data is erased how I can recover data  
  5. Citect: Displaying IO device comm. Error

    Hi guys, In my current project, I have a number of energy meters (128) communicating on Modnet (TCPIP) with Citect as different IO devices. I have a screen, where I wish to display the communication status of each IO device. If there is an error communicating with a particular I need to associate a tag for displaying the same. Can someone guide me how to accomplish this.   Thanks for looking in.
  6. NB7W-TW00B Print Error 7300-FFFB

    Good day lads, we encountered an error on a NByW-TW00B HMI, showing "Print Error 7300-FFFB". Checked already on the manual, which mentioned this : "Driver & UI Printer Settings Disable" (V106 manual, Section 7-9). What's worse is that NB manual doesn't give any workaround for any printer error. The NB is not connected to any printer. The "Enable Print" tickbox is unselected (checked both in the program and in the System Setup Screen). Also there is no button/macro which triggers any print function. Any of you have encountered this? Any advice is appreciated. Thank you
  7. Micrologix 1000

    Im having some trouble with a PLC and looking for a some help. Whats happening is output number 3 is stuck on. I thought maybe it was just the PLC. I pulled the program tried it on a new PLC with no luck. I checked for faults and the handheld shows no major faults. The output that is stuck on is for a door, its telling it that the door is open. Any help would be great.
  8. Hi everyone, First time posting here, sorry if I screwed up any rules on this forum. I have a logic file that was created two years ago. I'm using RSLogix 5000 version 20.04. The customer has owned it for two years, and I just got the latest copy back from them to do a kit. So when I go to save my changes (offline), I get "Failed to save the project as 'filepath'. An unexpected CTree error occurred." Error 753-80042211. (see attached screenshot) I tried searching this error on google, with no results. I went to the help dialog box, which wasn't helpful. (See second attached screenshot) I can't think of anything else to do, my boss is gone until two weeks from now, the other guy in my department has less experience than me.   Can anyone think of a way to fix this? Otherwise I'm completely stuck. Don't think my boss will be happy with me getting nothing done for a week.   The help file says: Error saving the project to a different file An attempt to save the project to a different file failed. The error message you receive indicates one of the following conditions: Name is badly formed The name does not follow the IEC-1131 Name standard. Enter an IEC-1131 compliant name. >>> I tried the name "test" with no success Access denied If the file already exists, make sure that you have read/write privileges to it. >>> It is not set to read only or anything of that sort In use by another process The file is being edited by another process. Close the file in the other process if you want to save over it. >>> Tried making a copy to my local drive, opened that one, still won't save Path doesn't exist Make sure that the path exists. If you are saving to a network drive, make sure that you are still connected to it. If you are not connected to the drive, you can save to another drive to preserve any work in progress. >>> Tried making a copy to my local drive, opened that one, still won't save   Not enough disk space Free-up space on the drive you tried to save to, or choose another drive. Note: RSLogix 5000 cannot save a project to a drive with less than 2M of available space, regardless of how small the project file size. >>> There's way more than enough space for this file
  9. MELSEC Q2A PLC

    Hi to all, i have melsec plc Q2A CPU error. i did plc diagnostics with the software and realise this error code 2300 and 2401. i reloaded the programme and tried to reset the plc but error still exist Please kindly help.
  10. Gents, i'am getting error code 8 when i try to read from another plc . Both are siemens im151-8 plc's. I hope anyone can help.   Regards, Mucho
  11. PLC RESPONSE ERROR

    Hai, I have downloaded the program into the PLC, downloaded the program into the HMI VIA ethernet.When I turn on the HMI it's showing "PLC RESPONSE ERROR". I can write command to plc through HMI, But I can't read the signal from PLC, Does anyone know the meaning of this message or what I might be doing wrong or missing out?...CPU used:CP1L-EM40DT1-D, HMI used :NB7W-TW01B...PLC to HMI communication via ethernet... 
  12. fx2nc

    Hi, What is the problem when error led lit for fx2nc  mitsubishi plc  
  13. Hello, has anyone noticed that plenty (not all) forum posts are changed to quotes from TWControls? What is happening here?  Hopefully only a momentary breakdown  
  14. Hello I tried to go online with MicroLogix 1200 through "1761-CBL-PM02 Series C" serial cable. I read its manual and it says i can use the cable to go online. I got these errors and i attached them. Can someone tell me why i am getting this error? Thanks for reading and have a good day !
  15. Error on Mitsubishi Servo Pak

    I have a Mitsubishi servo Pak #MR-J3-40B with an error 25 and 95 flashing. Could not find any help on the web or in the manual. Any help appreciated.
  16.  hello there ! all the variables are reals ... can anyone explain why i get a different result when i calculate c2 first ??? the two programs shown in the pictures are exactly the same ... the only difference is the posistion of c1 and c2 . please help me . It's not a logic  attitude in programming ..... Any ideas? Thank you
  17. PLC setup error location

    Dear sir, how to solve this problems non fatal error 9b, Omron cpu44 c200hx
  18. ES:01802015

    Hi:           I am new to Mitsubishi, I have a FX3U-80M with I/O expansion, I am using GX Work 2 Structured Ladder and tried to download the plc program but failed with this error message "Upload or Download is not possible when Data exceeds capacity of the memory cassette, Check the memory capacity setting in the plc parameters"   At the moment the memory capacity set is 16000.   Can some help?   Thanks
  19. GE PACSystems Ehthernet Interface Error

    Hi ALL, In the Rx3i controller fault table-the following fault keeps coming-up "0.4-LAN System-software fault: resuming" Error Code: 402 Group: 16 Action: 2 Diagnostic Task Num: 6 28001d001400000004011d000000000c0a88066 Does anyone have the definition of this error code and how I can interpret the error? Thanks Chris Ok Tedi PNG
  20. Error code: 4140

    Hallo. Recently ive got an error i haven't seen before. Error 4140 im using GX IEC developer  CPU is Q06UDEH I cannot figure out why the error happens.  When show the location to the step where the error occurs it makes no sense. The specific area has only got simple bool operations. When trying to recompile the entire project. The error "moved" to another location in the program. At this step there was a lot of float operations. When monitoring one of the variable value was NAN. I could not find anything about NAN in the manuals. But google stated it could mean not a number, which makes sense when reading the error description. I know it impossible to help me with my specific problem, when i cant really tell where or why the problem happens. But im pretty sure it has to do with me using float operations wrong. Ive tried to do a simple test program just to see if i could provoke the error, but no luck. How can i make a number go out of range, make it unnormal, nonnumeric or even infinite? Maybe someone could give me a simple example how to provoke this error, which might help me on my search in my own program. Thanks. Below is a screen-dump from the manual on this error.
  21. Let me try to explain this correctly..  I have a machine built and coded in Japan, so while I know 90% of the code and functions there are certain parts of the code I have never touched.    Today i started getting an error that is commented as E-Net, so I am assuming its an ETH I/O issue.. but the device is something I have never seen. U1C\G20480  Can someone explain to me what this device is or how it is used? 
  22. Dear all, Last week I had an A1 PLC in error. I was wondering if there is a D-register that contents the error which caused the PLC to go down. Especially the D-register that keeps the information of previous errors because we had to power down the PLC to reset the problem. The problem did not happend again but i like to know how to deal with it when it does. I Know there are some D9000 registers to show internal errors like battery fail however I don't know if there is also a register that shows the last and second last error after power down. I hope someone has the answers to this. I'm looking forward to hear from you. Best regards, Theo V.
  23. Bit strange - I use CompoNet all the time and just had my first issue. I found Remote I/O error code 9 in the CPU but cannot find what the code means. Went through the manuals and all errors appear to be in hex. Can anyone help at all please?
  24. Hello! So I have this issue with me by this week. I have an NJ with unit version 1.00. I had not did any download/upload on this unit. Due to the need of showing using Password capability on Function Blocks, I need to upgrade the unit firmware version, so I changed it to 1.10. After that I tried to program a simple two Sections program. I left the CPU for a week, then when I get back to it, I upload the program from the CPU. And the upload was SUCCESSFUL! No errors are shown. However all of the Rungs inside each Sections contains nothing. Even though the two Sections that I made before are still present. The program itself is still working though. If I open the previously saved project, going online and do variable controlling, I'm still able to do so. Has anybody experienced this before? Any suggestions / solutions? Thank you...
  25. Hi guys, I have a problem with GX IEC Developer 7.04, i hope some of you can help me. When i try to connect with the PLC type - Melsec FX1s- 30MR-DC, there is an error: I check all COM port settings, and everything is ok. Com_port parameters: FX Parameters: Transfer setup: PLC Type in the program is the same like physical one (FX1s). I try to change all of this stuffs but there is no result. The cable I use for comunnication is this type: Thank you very much in advance. Have a nice day! eng R. Bukov