Search the Community

Showing results for tags 'error 95 1s servo'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 252 results

  1. Axis Permanent Control

    Levent1970 posted a topic in Mitsubishi

    Hi Guys, How can I bring an axis into permanent control? that as soon as a value changes, the axis reacts. My Hardware FX5U, FX5SSC MR-JE-20B. Thanks a lot.

  2. Servo tuning

    Gman1 posted a topic in Mitsubishi

    Hi.  I am planning to do a full scale servo tuning on our producting machine. Is it possible to do it while the servos are in, assambled? I mean no production, no disassembling, servos stay where they are, just tuning them one by one with their empty load..
  3. HELLO EVERYONE THERE IS THIS PROJECT WHERE I CHANGED THE OLD SERVO SETUP WITH NEW SERVO DRIVE MRJ4200A-RJ SERIES. OLD SERVO HAS A REVOLUTION OF 15 BITS BUT NEW SERVO HAS 22 BITS RESOLUTION. PROGRAMMING IS SAME BUT MY DISTANCE CALCULATION IS DIFFERENT NOW AND MACHINE DOES NOT GIVE CORRECT DISTANCE. PLEASE HELP ME

  4. servo training

    rurka posted a topic in Mitsubishi

    Hello . Does anyone from the forum have such a program as on flimik, and he could share a program for f3x and the got1000 panel regards
  5. Added new tags to an existing (and operational) PDB file.  Using DEMO mode switch (/t) to quickly add without USB dev dongle.  When switching from Workspace to Runtime all tags and graphics work.  However, when I switch out of DEMO mode and restart iFix, all tags show up as "Not Defined". the IGS OPC Quick Client shows good comms and data with the new PLC sources, so it's not a PLC comms issue.Truth be told, I do not work on iFix very often, so I'm hoping I just missed a simple step.Thanks in advance!
  6. I am trying to online edit a program in a MELSEC QCPU, using GX Works2, but I keep getting this error "A file which does not exist in the PLC was specified" <ES:010a4022> Few weeks ago I had just online edited the same program in the same PLC with the same steps with no problem. There had been no changes to the PLC after that. Just all a sudden when I try to edit yesterday I get this error. Not an expert in Mitsubishi, just started learning the basics. Connection to PLC is by USB cable. Steps I followed to connect to PLC:    -Online > Read from PLC    -Select PLC Series: QCPU (Q mode)    -Select PLC side I/F Serial Setting: Serial USB    -Select all target program to Read, then Execute I am editing the file that I had just read from PLC Steps I followed to online edit:    -Online > Monitor > Monitor (Write mode)    -Execute the function below when mode is changed: Checked all    -Edit the program (basically just deleted one -||- contact and drew back the line)    -Compile > Online Program Change Then Bam! error get! "A file which does not exist in the PLC was specified" <ES:010a4022> I had tried Verify with PLC, but all results match. Is there something I am missing? Help much appreciated!
  7. Hi there I am working on a project where Omron servo drags a part to a certain position using belt mechanism, But to avoid any slippage we decided to put an external encoder directly on the part. I was wondering what is the best to approach to drive the servo using the position of this external encoder. Is there any way that it can be configured directly with the servo? I am fairly new to coordinated motions, any help will be appreciated. Thanks
  8. I'm sure many of you are in the same boat with supply issues and elongating lead times with the Logix 5500 and 5700 servo drives. Are there any decent alternatives that are easily integrated into a 5380 controlled system, maybe with an AOI? I've looked at Beckoff and Parker systems, but Parker only seem to line CoDeSys as far as I can tell. Do any of you clever clogs have any suggestions for a well stocked alternative? As a side note, I'm not new to PLC programming, but I am only 6 months in to using motion and servo systems so be kind :)
  9. Hello! I'm trying to connect my QD75M2 with a MR-J2S40B1 Servo amplifier with an SSCNET cable. The problem is when I try to turn on the Servo ON/OFF on the Intelligent function in GxWorks2, an error occurs saying the servo amplifier is disconnected with my QD75M2. I'm confident that I've wired it properly. What could be the problem? Hoping you might help. Thank you.
  10. Hi there! I was working on EPLAN Electric P8 when suddenly, the program stopped working (mouse didn't barely move, couldn't click) which resulted in a blue screen after trying to close the program (didn't manage to force stop of the VMWARE process where I execute it).  So, the thing is I can open projects and all, but everytime I close a component window I get this error window: (S275024) Couldn't find setting USER.SYSTEM.GUI.Control.MGGrid.DeviceTagGUI.116.1002.LastIndex.index. And it happens when other different windows (for example when opening Layer Manager I get the same error with LayerManger instead of DeviceTag. Also, if I try to close Eplan by clicking the red X of the window, It won't close. What can I do? There's very little info about this error code in the net and I'm running out of ideas. Thanks in advance!
  11. Is it possible to reset " Motor replacement detected error" ( Error code 95.01) using code without connecting to PLC through sysmac studio? If yes please suggest how to do it... Thanks in advance...

  12. CX-Designer || Get error history

    Stefan_CJ posted a topic in CX-Designer

    Hello ! I am an beginner automation engineer and my new task is to export all alarm/events that occured from NS5 HMIs. Is it possible to do this using the pc? I am currently using a card to get those. (using the "hidden'' HMI's menu, accessed by pressing and holding on the display).  Thank you very much!
  13. All of the ethercat servos I have installed are Omron. I have used many many brands in the past - over analog, pulse train, but not ethercat. I have one of the Yaskawa servopacks that can control two servos independently. The drive is all wired (POT, NOT, safety), autotuned, it's in RUN OK state, I have installed the ESI file, set up the axis, mapped the PDOs.. it's all working, but they do not move. I made a test program just with MC_POWER and MC_MOVEJOG/MC_MOVERELATIVE/MC_MOVEABSOLUTE along with the resetting of MC and EC and the servos do turn on, but ignore any movement command. They do not flare up with an error, and they give me their actual position, so the network is working. If I send the movement command the command position starts to differ, so the plc is/should be sending the command. I feel like there's something missing in the PDO mapping screen, but I didn't need to do all of this with Omron so I have no idea. I thought at first the servos needed huge units of movement and speed but the actual position value confirms this is not the case since it doesn't ever change.
  14.  What is the difference between Active Immediate homing and passive immediate homing ?   Does Motion servo axis have to be turned ON for active immediate and turned OFF for passive immediate homing ?.
  15. I have seen some programs in which they manually unlatch all bits like in figure 1, and in some programs they don't do that.  The instruction help page, ladder execution says that in pre-scan .EN, .DN, .ER, .IT bits are cleared to false So do we need to unlatch all these bits before giving a motion command like MAM ?  
  16. We currently have Delta DVP60ES2 and DVP32ES3 PLC's doing positioning control on Inovance IS 620PS2R8I 400w Servo Drives by Pulse/Direction. Under both of these environments our pulse count read on the Inovance drives are reading higher than what the PLC is outputting. We also have Mitsubishi & Inovance PLCs, which when connected to the same Inovance drives dont have any discrepancies in the pulse count. We also have Delta ASDA servo drives, which when connected to the Delta DVP PLC's also don't have any discrepancies. Given we have tested these combinations, it has led us to believe there is something unique about the pulse train output from the DVP PLC's that is causing the Inovance drives to read additional pulses. Has anyone experinced a similar issue with Delta PLC pulse output? If so what was the solution? 
  17. Hello everyone, I have this weird problem that the PC (process complete) bit of MAS command does not clear after a cycle time.  As you may probably see in the picture attached when the desired torque has been reached, the servo has to be stopped using MAS command; however, this is good only for one cycle!! The PC bit will remain on even when the whole sequence gets unlatched/reset. I have to manually reset this bit. I was wondering if you could help me with this issue, please?  Thank you!  
  18. Hi Everyone, I have FX3U 60MR PLC and TP1200 Comfort HMI, communication perameters on HMI are 9600,7,even,1 stop bit. The problem we are facing is, communication drops after approximately 12 hrs. Analog tags become ### and HMI also dont respond to digital change in plc. Then we Power Reboot HMI and communcation get established. After few hours, same error occurs. we have change the HMI. But issue remained same. HMI is programmed through TIA 13 and TIA 14. HMI also dont allow to change communication parameter. Any one can help please?
  19. Hello, I've connect CP1E with PM2120 with RS485 and already make ladder program to read voltage, current, etc. But the problem is the binary value (D1354&1355) are not appear, and there's error in D1352 with error code : 88 hex. Which is the description of error code is "Exception response", and i already doing some experiment by just making a simple ladder with RXD/TXD instruction and put D1352 addresses and still error, which is same like before (88 hex.). Can i just still do something with this error? Please help me to solved this error problem. *Sorry for bad English Regards, Steven.

  20. FX2nc PLC Error: 6402 Param Error

    Sohel.ahmed.uk posted a topic in Mitsubishi

    Hi, My PLC is fx2nc-32MT. When I diagnosis the plc, this error I Found, 6402 Param Error. Please check the attachment Thanks for your Support.
  21. Hi,  Can someon help me with the following question. Like what makes a Kinetix 6000 drive a Guarded drive ? What type of safety stuff can you set to make it more safe.  Is it some parameter ? I am bit confused, by the manual. Should I active it in the PLC program or how ? Or it is some setting like a safe speed or torque.  I would really appreciate any help. Thank you so much ahead.  Have a great day, thanks for the reading.
  22. Hello guys!  Im using RS Logix 5000.  Can someone explain me what is the difference between when a servo is shutdown or disabled ?  I read the help but it says the same. I can assume it like when its shutdown, there is inside some circuit which is not allow the 3 phase for the drive.  Disabled is that when it have the 3 phase but nothing can happen ? Is there any difference with the break ? Like when its shutdown it can rotate until its slow down by itself or the break will be active ?  I tried to uplod a pic but it was not succesful. When you open a servo axis properties and you choose the Fault actions tab. You can find there these settings.    Thanks a lot. 
  23. Is it really not possible to use 2 shortcuts with FTView ME panels. When I try to create the runtime file (.mer), I am getting an error that can not be used 2 shortcuts. Is there any possibilities to make FTView ME connection with 2 different PLC's.
  24. Hello Guys! I have couple of questions about tuning an ab servo motor. -Actually what does the drive or plc doing when I launch a servo auto tuning?  - What are the little boxes like position error integrator ? There are checkmarks in fornt of the lines. Can I choose the methode or something? I mean its not "auto" ? Why it is auto then ? - Can someone send me some basic literature where they explain me what these stuff acutally meaning ?  - What is the hook up test what for is good ?  -When you are doing a servo auto tune what are the parameters that you are monitoring and why ?  -I should do the auto without or with load ? Whats the difference ? I know there are so many question I would be so grateful if someone could help me with these answears, or even just with one. Thanks again. 
  25. Hi. I would like to ask that like you guys are when using a kinetix servo motor what type of safety conditions are possible ? I found a fault actions label. Is there anything else like between the parameters or so ? Thanks ahead.