Search the Community

Showing results for tags 'equipment software'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 83 results

  1. Fuji Wsz plc

    Please send Plc software link
  2. Currently, our SCADA setup uses Kepware, Wonderware, and Canary Labs data logger and historian. The data flow is as follows:  PLCs --> Kepware (on PC near process) Kepware --> Canary Data Logger (on PC near process) Canary Data Logger --> Canary Historian (on Server) Canary Historian --> Canary Axiom Viewer Client (on engineer's PC) We use Wonderware as an HMI on the Process PC to control the process. As many will know, this is very wasteful as Wonderware includes many other features and we are paying for all of them yet using only the HMI feature. Our goal is to cut Wonderware out of the equation (i am aware that Wonderware  could replace both Canary and Kepware with its data logger and OPC server features but this is the direction that was chosen so we are going with it).  My question is: Does anyone know of any simple and cheap (-er than Wonderware) PC-based HMI software that could replace Wonderware on the Process PC?
  3. Help with Fx0s 30MR

    Hi there, just need a little help, I’m very interested to learn all about plcs, I know the basics and I know how to wire them, programming them is the hard bit! Ive got an FxOS MR30 from work, to play around with, I know I also need Gx developer also,  my question is,  could I use gx developer “micro fx “ for this?    It seems to be a lot cheaper than the normal go developer.http://ie.farnell.com/mitsubishi/gx-developer-fx/software-micro-fx-plc/dp/3825577 any help with this would be great thanks 
  4. PLC Training

    Hi Everyone We are setting up a initial training in PLC programming for technicians, I got some experience with SIEMENS S7 but this seems to be an expensive choice, we would like to opt for a budget PLC but at the same time would like a user friendly software for teaching......I would like to have views of users of other PLC brands such as OMRON, MITSUBISHI or even Schneider??? thanks Jay
  5. FX3sa-20MR

    Hello everyone, Have a nice day to all. We just received a small machine from china, and definitely we done a lot of modification to add  safety and other sequence, to adapt this machine to the existing line. I'm familiar with siemens and omron, and this is my first time for mitsubishi PLC. FX3sA-20MR, can somebody pls. help me what software do i need to download and programming cable to communicate with the PLC. Thank you in advance...
  6. Fx3s plc

    Hi, all version gx work2 can support FX3s? Im using version 1 gx works 2 and currently got new fx3s-10mr/es w/out program..i tried to make new program but fx3s ot included in this software
  7. Fx3s

    Hi, all version gx work2 can support FX3s?
  8. Software for Dynapro terminal

    Hello!  I have a Dynapro ET3170W touchscreen terminal from which I would like to upload the screen configurations.  I have tried Google searches and not found anything except user manuals.  3M has not been any help either. Can anyone tell me if there is a software program to do an upload or what I would need software wise to do it? I saw something mentioned in the application developer's manual about a TCS software package, but have not been able to find anything about it. This is really the only hurdle left in the project I am working on, as a Maple Systems or Direct Automation terminal can do the same thing as the Dynapro, I just need to know what commands are sent from the various screens.  Thank you in advance for any help.
  9. Does anyone here use this? Control Draw If so how useful do find it? Worth spending the time on learning or better off with another product? If so what? My application is going to be for in-house management and design of control systems for a food manufacturing plant.   Thanks.
  10. Hello I am kind new at Allen B. PLC and i have to make some changes in the PLC program: - add 2 safety switches. - add 4 photo sensor. just want to know what software do i need to make changes online. PLC \I have is  SLC 5/03 1747-L531 also have a touch scream terminal that i need to modify   panel view C600   thanks for your help guys.
  11. Now introduce a new product, Kinco HMI MT4414TE-CAN from FastToBuy.com This HMI use 32-bit RISC CPU and streamlined LINUX kernel, you can display a variety of true-color graphics format, and its superior processing speed and software to meet the needs of most users. and with a memory 128M FLASH + 64M SDRAM. The Kinco series HMI configuration editing software (official version): _Kinco HMI software_V2.2_Build131108 is Automatically installed in this product. View more info click here
  12. Hello, I'm looking for a simple data logging software, something that doesn't require any programming skills. Thank you!
  13. C28P processor

    I purchased a couple of C28P units on Ebay, thinking they were I/O units which I could connect to my C28K. Unfortunately, when I tried to use syswin software to enter a ladder program into the units, I got rejected by the software.  Can someone tell me what software I need to communicate with C28P.  If not, does anyone want to trade these units for C28K.. 
  14. how to check display type?

    Hello, I have a silly yet anoying problem, How can i check the used NS / screen type in a current x designer project? So i have a project, and i need to get a display to test it, but i need to check what is the display type.
  15. Emersion plc

    Please help me for emersion plc Ec-20 programing software download link  
  16. Emersion plc

    Please help me for emersion plc Ec-20 programing software download link  
  17. Hi dear , may anyone can help me.. My Computer has broken so all my software include cx programmer and Designer has been disappear. Where i can get free software CX One for free , thank a lot .. Best Regard
  18. ingineer

    hello. out there. I need som help. I never user Beckhoff Twincat before. but now I have a smal project on Twincat. after two days to undersatnd the Twincat . I still don't understand how to make configure hardware on twincat. som body can help me please or telle me where I can find the doc. thanks
  19. I am in the learning phase of HMI and PLC programing and am trying to use some of the hardware that has been donated to me. I have an AB panelview 300 micro terminal and a Micrologix 1000 Plc (they are not tethered yet). I have constructed a small test board with everything mounted to it and have successfully written and downloaded a simple project to the plc with timers, etc.   Now I need to find a way to program the terminal to make changes to the program.   I am looking for some free panelbuilder 32 or anything that will allow me to program the terminal and use it.   Can anyone help me? All help will be greatly appreciated!
  20. Schneider hmi software

    Vijeo Designer V6.1 SP3 - Software Downloads - Schneider Electric
  21. software question

    Which type of software is used for data matching in excel sheet.
  22. GX Works3 project merge

    Hi Not sure if someone has tried this. I have 2 GX Works3 projects. I am trying to merge them into 1. Is this possible?
  23. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  24. plc shihlin electric

    qual software do plc shihlin electric modelo seplc AXon-32MR-ES ou ele e compativo como soft da mitsubishi
  25. Mitsibushi GX Works 2 Error C4105

    Hi, I am building up a project in GX works for the first time and have several program blocks with function blocks set up (all in ladder). My problem is when I go to enter new tasks in the execution program it comes up with the error: More than one ladder program has been set in the program file 'MAIN' Has anyone had this issue? Is this to say that you cannot have more than one program in the execution program? Thanks Neill