Search the Community

Showing results for tags 'enable bit function block'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 58 results

  1. Gx Works 2 ve fx2n için bir fonksiyon kütüphanesine ihtiyacım var. Servo ve step motor kontrolü için.   thank you
  2. Struct as FB input

    Hello,  I am trying to define a struct as an input variable for a Function or Function Block. For example the function AddDelimiter (This is a standard Sysmac function), has a input variable with the variable type Struct, an it is possible to couple a struct to this input (See picture below). If i try to make my own function block with a struct or Structure as an input data type, i get the following error (See picture below). When I try to define a struct from the data types (In this case struct: Test) it doesn't give a error. But when I try to couple a struct to this input, that is a layer deeper than the function block struct i get the following error (See picture below). How can i define a struct as an function/ function block input? Thanks in advance.
  3. Anyone ever used a Wait-for digital tag in a C Program? I have to use C in the Red Lion Programs.. but, I'm not at all proficient in C (or anything else for that matter ..) Here’s a nice problem for basic C programming .. I really need to solve it .. but, so far ... can't ... sigh!: I have an actuator that will be commanded to make sine wave motion.  The program that does that, in the actuator’s driver-controller, requires the actuator to first be in a zero position.  Homing has already been done, so the drive knows where the actuator is.  I cannot modify the sine wave program; but, can command a Move Absolute program in the drive, to take the actuator to zero, if it isn’t already there.  When the actuator is at zero, it is “In position” and a digital tag will go True. If the Tag is False, the actuator is not at zero, it’s at some other position,  and only the Move Absolute program can return the actuator to zero. So, when launching this position command program, In a Red Lion G3 HMI, using only Basic C programming, how would you write a control program that would test the status of the actuator’s position, and, finding it at zero (the “InPos” tag is true) would start the Sine Wave program.  And, If the “InPos” Tag is false, would start the Move Absolute program, which would return the actuator to zero, and when the actuator is In Position, would start the Sine Wave program. Here’s the tricky part. It will take only a few milliseconds to start the Move Absolute program (if required) .. but how do you get the “C” control program you are writing, to wait until the actuator actually reaches zero, and the “inPos” tag goes true … which could take several seconds? I don’t believe there is a WaitFor function in “C” , and you cannot send either the Move Absolute, or the Sine Wave program more than once .. so, if a loop is used, it can loop only one time .. presumably with conditional delays. (however that's done)  You cannot use Sleep().. that would be cheating.. the full program must run in the least amount of time, and you do not know how far the actuator is from zero. You could use if (! InPos) or if (InPos) to qualify what programs to run .. but, where does the “Wait for In position”  fit into C Programming?  You might be able to use Continue .. but, ya still have to wait for “InPos” to go True…..before running the Sine Wave.       Thanks Much, Regards, Michael
  4. Profibus Function Blocks for Q2ASCPU for Melsec ST Lite RIO inter-connection. Please assist in advising the attainment of such blocks - if any existing. Thanks
  5. Hi, I'm working in so machine basic v1.5 and I'm wondering if it is possible to change the start time and stop time in a schedule block with a %MW. So is there a possibility to for example say %CH0.??? := %MW5 in an operation block? And is there a page where u can see al the possible codes. I already discovered that %TM0.P changes its preset but i don't find a list of al those possibility's.
  6. Hi All, I'm still quite new to Unity and Modicon PLCs. I have a PLC program running in simulation mode for development/test and I'd like to follow the logic inside a running block. I can't seem to just double click the function block while online to see it's 'inside' logic. Is there a way to inspect the inside of a running function block? How can I check and diagnose the logic a running function block? Thanks!
  7. ESATR / EGATR Commands

    Good morning folks, I've browsed this forum often enough over the past few years that I think it's time I finally signed up.  Lots of good ideas and advice that I've benefited from and I hope to return the favour some day. So on to my question.... I'm currently knee deep in a project using a CJ2M PLC and I have to send and receive chunks of data over Ethernet/IP.  To do this, I'm using the ESATR and EGATR commands (set / get attribute).  I would like to know if these commands finish execution (ie. the ethernet port completes the transaction) even if the input conditions to the command are no longer true.  Specifically, if I use the "port ready" system flag (A202.00 is an input to my FB in this case) as a condition to trigger the ESATR command, this bit will go low once the port becomes busy (ie. during execution).  So will that interrupt the completion of the ESATR command resulting in an incomplete transaction and data loss?  I've looked through the help files on the command but don't get a clear picture of how it behaves. Perhaps the attached JPEG shows more clearly what I mean. Thanks, PC
  8. Hi, can you help me how to make program indirect address for plc omron? I use PLC CP1E Thanks
  9. Can Anyone Come Up with the Screen Shots or a video link of procedure for Displaying Real Time Sinusoidal Waveforms From Satec MFM ON GE FANUC?? I have PACsystem RX3i via Serial Communications Module-IC695CMM002 
  10. can you help me? bring me some example to build function block program with Gx Works? I use Q02U CPU   thanks
  11. where are the FB libraries

    Hello, Im looking for the in built function blocks, but i cannot find it in the program files/ omron folder where the manual says (even with search for *.cxf), perhaps i dont have it installed, but where can i get them from? As i remember i downloaded cx-one from the official omron web page after login etc, so thats why i dont understand why am i missing the fb libraries What else place there is to find useful FB-s? Thanks!
  12. Hello.   A colleague sent me a screenshot (attached) with a peculiar issue. An ADD function that only sends 0 as the outcome, and a DTOS function that only sends " . I have confirmed that all variables used in the ADD block are declared as integers, and both SumInt6 and String10 are not currently being modified somewhere else.  This impatient colleague is baffled, while I am just sharing this issue in the hopes that someone will eventually come with the simple answer that we are overlooking, or a complex one that we could never hope to realize by ourselves.   Thanks in advance.
  13. Unable to Monitor in GXworks2

    Hi! Anyone can help regarding this issue. I'm not able to monitor the Motor Block that I have created. there's no error either in the output screen but i'm thinking what is the cause of not running in the simulation which shows the Motor Folder RED  even it was compiled. thanks for the help!     Note: I'm new in mitsubishi.
  14. GX Works3 Projectlib Locked

    Hello, I have a problem that I need to solve in a PLC program has it's projectlib locked.  I work for a company that contracted a PLC programmer before my time to program their new version of their control cabinets. The company did not write any specific contract with the contractor and just relied on his work. The guy later delevered a buggy software that is kind of functional (the bugs came up at the commissioning after the guy was paid and now he refuses to help or to provide more consultations). I have as a task to freshen this up and make it work without bugs, the problem is that the Projectlib is locked and I cannot access the source code.  The only thing that I can changes that I can make to the code is to put some logical circuits between the I/O of the already existing function blocks, which solved some problems, but not all and it keeps one of the most important ones as well. Anyways, that's my story, so now my question is, is there and possible way of unlocking the projectlib? Any feedback would be highly appreciated. Thanks in advace!
  15. Function block self-made

    Hi, i want to make a function block which will contain a block GP.CPRTCL (for predefined comm protocol). GP.CPRTCL has an input "Un" who only receives constant (H,K). On input of my own function block i can set a constant variable, but inside block that variable isn't a constant anymore (GP.CPRTCL doesn't recognize a variable). Is there a way for receiving constant variable in GP.CPRTCL block ("Un") if it is in another block. Regards
  16. Beckhoff PLC Counter

    Hi everyone, I need some help with my PLC programming. I am currently using a twincat 2 software and a Beckhoff CX 8090. Basically, the gist of my program is to send and receive data and datalog the input data received from the sensors and timestamp the received data for every 1 second. I want to create a boot up counter where it will count the number of times my data logging program has restarted(if it did). This boot up counter serves as a health monitoring check to ensure that my program is running perfectly and thus, not restarting randomly when it shouldn't. I am more familiar with structured text so if you have a solution, kindly post it in structured text form. Your help would be greatly appreciated. Best regards, DeadPool
  17. Hello. I'm trying to use index addressing inside function block.  The command *D200 doesn't work. Is it necessary to use IR0, ID0,... inside function block? Thanks. Best regards
  18. in Citect i use the following function to associate various Tags with the next popup window, in the previous versions the tags passed to the trend fine since upgrading to 7.4 the trend pens dont display but all the values display fine.  FUNCTION // function AssPIDPopup // Expand a full set of PID tags and open // the PID block supergenie AssPIDPopUp(STRING sSGenie,STRING sBasePIDTag)     AssVarTags(-2,0,sBasePIDTag + "_PV");      AssVarTags(-2,1,sBasePIDTag + "_SP");      AssVarTags(-2,2,sBasePIDTag + "_OP");      AssVarTags(-2,3,sBasePIDTag + "_MAN");      // Now the tags for the PID tuning SG     AssVarTags(-2,4,sBasePIDTag + "_KP");      AssVarTags(-2,5,sBasePIDTag + "_KI");      AssVarTags(-2,6,sBasePIDTag + "_KD");      AssPopUp(sSGenie);      END I added a button to run the following code FUNCTION Loadtrend()     TrnSetPen(19, 1,  AssInfoEx(1,0));     TrnSetPen(19, 2,  AssInfoEx(2,0));     TrnSetPen(19, 3,  AssInfoEx(3,0));     Prompt("Test");      END     when clicked the pens set to the trend fine, i tried to run the code from a function but it did not work. i am new to citect and am sure i am missing something stupid.
  19. Enable bit in function block

    There are a lot of instructions in function block that are missing the enable input that is present when programming in ladder logic, such as  ADD or MOV.  It seems to be very limiting. The only way around it that I know of is to write your own function block in ladder logic or statement list and use that. I seems rather limiting of a language if it relies on other languages for it to be usable. Does anyone know why the enable bit was left out in many function blocks when it is so useful in ladder logic? Pat
  20. I'm having trouble with some very basic programming using function blocks. Specifically Connect Components FB programming, but I think it is a general, common application. Using ladder logic, it is easy to set a value based on the status of a bit. If the bit is false, move a zero into the variable. If the bit is true, move and 88.0 into the value. This relies on the enable bit of the mov instruction in ladder logic. Many function block instructions do not have enable bits. How would I change the value of a variable based on the status of a bit using function block programming? A real world example: You have a two position selector switch. If it is turned to the left, the drive runs at 0 Hz. (off) if it is to the right, it runs at 88.0 Hz. Or if you have a 4 position selector and want to select between 4 speeds. This should be a simple task, right? I've called the tech connect support line a few times and sent them a few emails and they haven't been able to figure it out. This is such a basic task. Thanks, Pat
  21. Dear Experts!!!   Could you please provide me the sample of "QD75MS Module & MR-J3-B program with functional block"    As you can see the page no. 3  in the attached document  "KI-Doc_QD77MSXX_MR-J3-XXBS.Zip" sample is there but i am not able to find it anywhere.   Or if you have any otherone please share it.   Please help!!! KIdoc_QD77servo_English_20130131.pdf
  22. Hi there I'm an embedded software engineer mostly programming C/C++ in Linux and have very little knowledge of the PLC environment.  Recently my attention was diverted towards integrating C/C++ (Linux software) into PLC and then presumably as a function block which is supported with something called PLCOpen. Is that right ? How is multithread support in PLC in general ? and/or with the these function blocks or what ever might become instead when integrating/porting C/C++ code into PLC.  The current situation is purely embedded Linux environment with open-source 3rd party userland that our code relies heavily on. How feasible is to port such environment over to PLC (given that the system supports it) ? I've been looking into B&R Automation Studio 4 and having a hard time to establish concrete feeling on how difficult/easy it is to port the code.  Hope anyone can give me a slight insight into this.  Kind regards Einar
  23. Block Set or Block Move

    Hi:     in Omron there is a command BSET which can be used to set value from DXXXX to DXXXXn. Example BSET #0 D2000 D30000 What is the similar command in Mitsubishi FX3U structure Ladder?   thks
  24. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  25. Function Block or any other method

    Hello, I am a student that has been taught ladder logic for three years( on many different plc's ) but, I would like to learn an alternative method is there any way to convert ladder into Function Block or some other type of programming in RS logic 5000 or any other controller? If not can some one explain the basics of Function Block programming.