Search the Community

Showing results for tags 'delta mitsubishi'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 378 results

  1. Hi guys, im trying to redirect a screen when a bit is active in GT designer3. im still a beginner in the GOT. any help? regards, sathu.
  2. Hey Everyone,   My company decided to purchase a piece of equipment from China, and I have the pleasure of updating its terrible existing controls. We were given the PLC program by the manufacturer, so I was able to make my changes pretty easily - or at least that would be the case if I could actually connect to the dang thing. The source program is indeed openable and editable via GX developer (the original configuration shows it as an FX3). I figured connecting should be straightforward, but I was wrong.    I initially used a serial/usb converter that I've used on some older Allen Bradley equipment (which worked fine for that). However, after no luck using it on the "Mitsubishi", I purchased a different cable that I found recommended on this forum (Tripp Lite USA-19HS - https://www.alliedelec.com/product/tripp-lite/usa-19hs/70101537/?gclid=Cj0KCQiAj9iBBhCJARIsAE9qRtB_n8TVAnJdFyYokoEu42W6H6LaT4kVsgJQI1qvPUsUF3rFviKpbt0aApLHEALw_wcB&gclsrc=aw.ds). Still, no luck. I've tried 7E1 and every baud rate possible, as well as some other bit/parity configurations (and yes, I've verified that I'm using the right com port, as well as tried moving the converter to different ports and trying those). Nothing seems to go through.  I have almost no experience with Mitsubishi beyond a couple of FX5s (which have worked fine, but I connect to those via ethernet). Any help would be greatly appreciated; if I can't make these changes, I'm going to end up rebuilding the whole cabinet with a PLC I can rely on.   Thanks in advance.
  3. Hello,  Greetings everyone, I want to communicate RFID with Nexgenie 2K PLC via serial communication protocol (RS 422), I am using Codesys 2.3 software for the development, may I get any sample program regarding this or someone can suggest me how can I implement my program, Thanks in advance.
  4. Dear Mr. PLC forum members, I am brand new to the world of PLC’s and I am looking for advice on PLC platform selection for a device prototype. The proposed PLC is for a “smart” hydroponic system. Please see system I/O and other parameters below. Parameter 1: Price - I am self-funding this so price of PLC and software is important. Happy to spend ~$2000 for PLC; I/O cards and related hardware. Total prototype cost is around $15,000 including PLC. Parameter 2: Availability & Support in Australia. Parameter 3:Newbie Friendly: I intend to code the PLC myself and have never coded a thing in my life before.  Parameter 4:Discrete Outputs: 11; Discrete Inputs: 0; Analog Outputs: 2-3; Analog Inputs: 9  Parameter 5: Capability to extend to IOT for remote access control and monitoring (via cellular or wifi router)   As you can see, this is a relatively simple automation project. All my research seems to point to Automation Direct’s BRX PLC but I just wanted to get some suggestions and feedback before purchasing. Anything else that might suit my needs? Any insight would be greatly appreciated. Bruce   
  5. Keypad in GT Designer

    I need a key pad which can be used for numeric input, can anyone provide any sample program.   Thank you.
  6. Mitsubishi PLC with Fernhill SCADA

    Hi, Has anyone here has experience of using Fernhill SCADA with Mitsubishi PLC FX3U Series? I want to monitor PLC's data in real time through FX3U-ENET-ADP ethernet adapter using Fernhill SCADA software. Thanks in advance for the answer.
  7. Hello All,   Semi-noob here with Mitsubishi PLCs. I'm starting a project in which we are upgrading an existing A Series PLC with the Q.  Is there a datasheet somewhere that lists compatible software within Mitsubishi's lineup? I had no luck in searching their site.   Also, (in the same project) the existing network uses DeviceNet. I have the Q series compatible card for that - but within what software does one configure the network?   Thank you.
  8. Servo motor - vibration issue

    Hi I'm facing vibrating issue in servo motor (11KW) used in x axis, it makes noise while it stops after positioning. While positioning happend it operates smoothly, in the stand-by position only it starts vibrating. I'm using manual tunning mode (Abnormal noise occurs in jog operation and stand-by position only)    
  9. GOT 2000 Buil-in Memory exceeding

    Hello Everyone I have an issue with a  Got 2000, im updating and adding some screens in  a old  HMI application with size was about 47 MB,  as im still updating i wanted to test the application  which now sizes about 52 MBbut is not possible due to the shortage of  ROM and RAM, what can I do in this case as the application must be in the built-in Flash memory which is very limited?   Thank you in advance
  10. Proface with Serial Printer

    Dear Sir, Good day. I facing difficulty on using proface to print out the data using serial printer. I did follow all the instruction on proface reference manual but still fail to print out anything. Anyone here having experience on this issue? Thanks. 
  11. Hello !  The idea is to heat greenhouse with stable temp at 13*C.  Heating method is with circulating hot water(80*C) true pipe, and open/close three-way valve. Output 1 is for open big circul Output 2 is for close big circul valve is 50 mm , step is 10 mm per minute In theory water heater start at temp 15*C to be prepear and for about 40 min is ready with 80*C .  Temp is continue droping and at 14*C three-way valve start to open circul 1(big one) and need to open 10 mm  After 0.2*C drop down open 10mm again ...  and when temp is drop to 13*C 3-way valve need to be open at all 50mm ...  So the greenhouse is big ( arount 10.000 sq.m. )  And temp continue drop(or not) but in fact is drop to arount 12,5*C to 12*C and stop.  When greenhouse start heating. Temp is start to go up.  3-way valve need to start closeing,and at temp 13*C need to be fully close.  Problem is that : when temp is going up  Delta DT320 is operating at the same time OUT1(because temp is lower then 13) and the same time OUT2 is try to close, so the 3-way valve stay at the same place and not closing because is have "line" on open and "line" for close.  setting from Delta DT320 Control  Ctrl Method : PID RUN/STOP : RUN  Heat/Cool : Heat(out1)/Cool(out2) Com Write : enable Lock status : normal  AT : Stop SV control : Const SV Input  Type : 4-20mA Unit : EU SV : 13.0 Range Hi : 50 Range LO : -20 Pointer : 1  PID Parametyer  Pb : 0.2  Ti : 787 Td : 196 Ctrl Period : 20  I offset : 0.0  PID set : AUTO PID SV(auto) : 100.0    
  12. Hi all,  I want to ask some questions regarding Ethernet Communication with FX3U PLC series. I have 2 PLCs of FX3U series (FX3U-48M and FX3U-64M) and I want to monitor its data (input and output) using ethernet communication in real time. My questions are: 1. Does FX3U PLC have ethernet port so I can connect it directly to my Laptop/PC? 2. If no, do I need to use FX3U-ENET-ADP and can it be used for 2 PLC or only 1? 3. What software do I need to use to configure the communication between PLC and FX3U-ENET-ADP? 4. Does this configuration change the existing PLC program? 5. Can i transmit the data wireless-ly using some kind of ethernet to wifi adapter and what additional hardware do i need for that?  
  13. Hi all  I need help with communication between Mitsubishi L06CPU-P with Siemens S7-1500 by Modbus TCP. It's necessary to send data from L06CPU to S7-1500, but I don't know anything about mitsubishi and gx works2.  Picked up some pics how I did it, but I didn't verified how it works. Can anybody help me with this? https://ibb.co/8KDmg5x https://ibb.co/Jm8shCx   edited: I also found LQnUDEModbusTCP_GW2_with_FC_V120 library, but how it works I dont know
  14. hello dear team, im trying to make a back up for some FR-E700 with the FR CONFIGURATOR SW3 but when i start the communication with the USB cable the software cant recognize any port by the way im using windows 10 in my laptop and when i check the devices administrator it doesnt shows in USB ports the drive info just in other devices and in details shows: "USB device was not migrated" does anyone know what can i do?
  15. Hi,     I am trying to establish communication between master and slave through modbus rtu rs485. But I am experiencing error code 7378h. I already tried to make the values of Request Interval Timer from 100 to 200 and Broadcast Delat Value from 50 to 100. But the error still persist. Any tips how to solve this issue? There is no error on the slave evices.
  16. Hello everyone! I've installed GX works 3 according to the instructions in "https://plc4me.com/gx-works3-v1-308q-mitsubishi-full-real-100/". I don't get any errors, I can run the PLC and simulate completely OK. In the communication test, when the configuration is missing some components in the module list: Input, output, I / O module,... (https://ibb.co/ZVMcmQn) I hope you can answer for me?
  17. Dear members ,  1.)I have sensor which i read it from analog input (0-10v)  specific value and i will pas it via analog output (0-10) to controll VFD for air spped controll .  so i'd like to keep specific value for example i will set value 260  , so if analog read  les that this value than analog output increase voltage to analog output , if analog read more than this value output decrease voltage .  2.) i have Digital to analog register D8096 which 0 value means 0 volt and 4090 means 10v , so when i need to pas value to i make MOV D200 D8090 , is there a posibility to limit write value to D200 to not pass 4090 ?
  18. Q03UDVCPU Modbus Setup

    Hi Guys, I need help to set up modbus tcp/ip parameter for Q03UDVCPU, i want to use the predifined protocol and built in ethernet port. do you guys have some usefull references how to setup modbus tcp/ip, or is there any example program from mitsubishi? Thanks
  19. Designed a SCADA System using VB.NET. Everything working fine but coming to performance getting 2 to 3 seconds delay. Using FX3U32m Plc with ENET Module for Data reading and writing. I am having 200 addresses to read. Using MX Component as communication interface between PLC and SCADA. Is there any alternative or solution for this problem. Using one timer to read all data and update properties based on received data.    Thank you..
  20. Delta PLC Analog Wiring

    Good day all, I recently working an assignment to read analog data from sensors. I connected everything just as what the manual for sensor stated. My PLC is DVP20SX2 and the sensor data i want is 4-20mA. The analog sensor has two wires, Analog Output + and Analog Output GND. I connected the + to I0+ and the GND to the VI0-, but when I work online using the ISPSoft, I can't get any data. My doubt is the wiring. Can anyone guide me on this? Is my wiring wrong? does analog works the same as digital, where we have to connect to same COM?
  21. GX Developer Comment

    Please help how to set the language I'm using Windows 10, the comment and program origin is from China. Im using GX Developer sorry I dont know why I cannot attached a photo.
  22. Hello Members. I am trying to read Counter values from FX3U PLC using VB.net AxactUtlType Library. But i am not getting those values from PLC. I am getting Memory and Analog data but not Getting Timer and Counter Data How we read that data? Thanks in advance. 
  23. Hmi temperature delta

    I have connected 2 temperature devices with him delta with plc delta by rs485. When I run plc I can see the temperature change on pc but the problem in hmi  it's give errors. Com 2 errors  I need someone help me to connect these devices please 
  24. FTP from OMRON NX1P PLC to a Delta HMI

    Hi all, I'm looking to try and send data from the SD Card on my OMRON PLC to a flash drive on my Delta HMI - DOP107WV using FTP. So essentially I need to use the HMI as a FTP host. Is this possible? And if not, is there another way of doing this?  Thanks, Ibrahim
  25. How to connect + Program wire encoder

    Hi all, I am not a PLC expert but can find my way within the program and would like to develop much more. For work (We sell industrial bandsaws) we have purchased a Posital Fraba wire encoder, and we would like to hook it up to our Mitsubishi FX3G PLCs to measure at what height the saw bow of the bandsaw is at that moment. Unfortunately I have little experience with connecting these things, as other encoders used in our machines are pre-installed by our factory. Below is described what functions the wires have. What I thought was the following: Pin 1 goes to an input of the PLC Pin 2 goes to + (or 24V) Pin 3 doesn't go to "Ground" as they describe, but instead to - (or 0V), which is technically ground Pin 4 and 5 we don't use, correct me if I am wrong. The saw bow goes up and down only, and I thought we don't need to use these wires.   I connected it like this, connected wire 1 to X0 on PLC and just to test I made the program read:   M8000 ------------------------------ C235 k99999   But the value stays 0, whether I pull the wire or not. So something is wrong, but what, I really can't figure out. Hope someone can help!