Search the Community
Showing results for tags 'delta mitsubishi'.
Found 380 results
-
Hello, I'm using HMI DOP-B03E211 and its connected to DVP12SE11R PLC . I need help with some function in the DOPSOFT program. 1) I would like to implement a function that after 1 minute of no screen touching it returns back to the main screen. 2) I have listed the alarms in the ALARM SETUP (under Options) and i would like to link every one of them to the input registers (Xi) in the DELTA controller , for instance , i want to link between the alarm : "MAIN AC FAILURE" to X0 in the PLC. how do i do that using ALARM SETUP? 3) One of the customer's requirements is : in the main screen you got three buttons : 'operational' , 'maintanance'' , 'alarm list'. - when i click on operational button and then on the alarm list it should show me only the alarms which relevent to operational mode . when i click on maintanance button it should show me the alarm which relevent to maintanance mode. how do i do that? 4) I would like to enable the option to control that alarm list through the PC - in the PC i got an Excel file that lists the whole alarms in the system . i would like to control those alarm by that Excel file - Enable / Disable the alarm through that file and save that list in the HMI. how do i do that? thanks in advance.
-
Dear mrplc and plc experts, I would like to ask for any solution or insight regarding to mitsubishi cpu problem with code: SP.UNIT LAY.MZZ which I could not find any footage/information related to this error Your helps are really appreciated.
-
I want to do a calculation in the FX3u-48MT ESS and combine it with the input from HMI GOT1020. By the time i put input in the HMI with real number, and i calculate that with some equation just like in the manual as seen in the picture. I was confused when the result in the DINT is too many and in the pulse, it got minus, when it should be plus. Is there any way to fix this ? and how to round up the result correctly ? I really appreciate your help. Thanks in advance.
-
I'm trying to overlay a text figure on top of a bit lamp. You'd think it'd be easy... but no matter what layer I set the lamp to, or how many times I click "Move to back of layer" from "Stacking order" in the right-click menu, the text figure stays behind the lamp. The only reason I'm using a text figure vs. just using the text function of the lamp is because I want the text to be vertical - a feature that you do not have with the text function of a lamp. Any ideas on how to fix this? Any help is greatly appreciated!
-
Hello good morning, I would like to comment on a case, I have a MR JE A 20 driver, it is connected to a plc and it moves a clamp. The fact is that I have variations of distance until it reaches stops and skips the inverter by overload. Well my question is the following, I want to use the mr configurator, I downloaded it, but it gives me a drawback when I connect it I figure as the driver, but in the program it only appears offline, I can not revert, it will be because the Plc Thank you very much for your reply
-
Good day Please assist me - pertaining to the QSeries GXWorks2 Programming - and in particular the utilization of the macrocode functionality. The information required includes; [1] Purpose of macrocode (incl advantages) [2] its utilization's effects on the PLC programming memory (it appears that it consumes more programming memory. [3] any reference documentation that could be used - containing specifically information regarding this feature (note most manuals doesn't discuss this)
-
Hi, I'm trying to convert a binary string format to integer using Q03UDE CPU. String data : '1001' Expected Result : 9 Kindly help.
-
Hello , I'm using DVP12SE11R Delta PLC . I would like to read data from an external device using RS485 communication. In the WPLSOFT i have informed that i gotta use MODRD command in order to read the data . but i am not sure how to use it properly. the data is formed as one bit ('1' or '0') i wanna read 10 registers using MODRD although those registers are not ordered one after another and i know MODRD can read 6 registers one after another. Then i would like to use that bit as a Normally Open contact in the WPLSOFT and turn on a coil. i would like to get some help with it. thanks.
-
Hi everyone I have PLC delta dvp60es2 ,when I connect with software wplsoft v2.37 The PLC ask me to write PLC ID What plc ID I don't know please help me Best regards
-
Anyone know if MXSheet will talk to the R series CPUs?
-
Has anyone used EtherNet/IP to CC-Link Local & Intelligent Station Gateway of prosoft? is there a timeout issue even with a small network of 2 Q CPU and 1 controllogix connected via etherned? I need to read and write data to and from 2 Q CPU and Clx so I am considering this as an option. editted: not lag but more of timeout issue if there is simultaneous read write from both melsec and clx with 3 DINT words.
-
Hi Has anyone got any real life experience with the new Mitsubishi iQ-R series? I have been assigned a major capital project to replace our old ageing DCS system. Our current PLC backbone is about 40x Q2ASHCPU, 10x Q06UDEHCPU and about 2xA2SCPU all linked up via Melsecnet/10 network with communication links into the DCS system via Modbus RTU utilising the QJ71MB91 modbus card. Due to the nature of my companies process and the limitations on plant downtime it is estimated this project could take up to 5 years to complete, with this in mind I am wanting to install a system that will not be obsolete (or unsupported) in a few years, hence, I am very interested in the new iQ-R series with it being Mitsubishi's latest and greatest. However, recent communications with my local Mitsi rep is not filling me with confidence that the iQ-R series is not as well supported/developed as the Q series. A major requirement during the development stages of this project is the new ability of the new processors to be able to talk to the old DCS up until a point where the DCS nodes will be completed removed and replaced with a modern SCADA package. Hence, the requirement of a Modbus Slave card for the iQ-R (i.e. a QJ71MB91 equivalent) which I am told is in development, but has no fixed timescales. Previous experience with Mitsubishi developments of cards is normally years not months. Any information anyone can provide on their experience of the iQ-R series would be greatly appreciated and if anyone knows if a Modbus Slave card is in development that would be useful. I realise i could utilise the Q series extension rack with a iQ-R processor but this is not the route i want to go down. Thanks for any help and apologises for the war and peace. Cheers Matt
-
In general, this control PLC program is written in GX Works. I did a simple visualization on TIA Portal v14 (WinCC RT Advanced) and I would like to now test it on Mitsubishi FX3U driver with ENET Module. I do not have much experience in this kind of thing, I'm still learning. I know that someone previously made a visualization in LabView and downloaded the tags from the PLC using NI OPC Server. Someone also did visualization in iFix and also downloaded tags through server opc. I do not know just how or what program to download tags in PLC so that I can no longer use it in visualization in TIA Portal. Unfortunately I still have a connection problem. The driver is connected to the router. From the connection options with RT Advanced I chose in the connections tab Mitsubishi and entered the appropriate IP. Still nothing. I do not know if the lack of a connection can be related to a virtual machine (VM Vare Workstation 12) on which I have TIA Portal installed. The driver pings but can not connect. I also tried using KEPServer EX to connect and unfortunately also failed. (I have information about the can not connect). Anyone know what program I should use? or had contact with such a problem? I attach a photo of communication from my station to more visualize the problem. Thanks
-
I have fxg3 and fx3s Mitsubishi PLC and gx developer software ver.7 ,my question what is the suitable software and cable to connected with pc
-
Hey guys, I'm really a newbie on PLC's, I'm working with a metal sheet folding machine. The past programmer gave me it's code, but I guess he gave me the wrong one. So, I uploaded the program with GX Developer 8 to a Mitsubishi FX2N-32MR PLC, all looked fine until I tried to run out the program. The error 6706 appeared up on step 3928 (blue rectangle). I read something about it already in other posts. But I'm not quite sure what to do. Can someone point me on the right direction? I attached an image where the problem thst showed up. Thanks.
-
Hello all, I have 7 Q series PLCs on a Melsec net/h network, Ladder Programming none of that fancy smancy ST stuff LOL. Were running the QJ71LP21-25. Now to keep it short I have used all most all my devices in my Network Range Assignment. I can not set up low speed range as I do not have enough Link relays and registers at all stations. No memory for more devices just trust that I can not do it... However I have an abundance of File Registers ( no I cant buy B or W in the PLC File params, well I can but it wont help because only one CPU is UDE the rest are H.) I have a project in which I must see about 50 words for each Station at every Station. I figured while I am setting up a Transient Transfer I will make a bunch of extra room for future updates and junk. My answer good or bad, is to set up some Send/Recv commands and do some Transient Transfer. I think I have it just about all figured out just a few questions. I have two manuals I have been getting my info from Q MELSECNET/H Network System Reference Manual ( I think SHNA080049) and the Melsecnet/h training manual. 1.Any one have any better manuals that better cover transient transfer? Or that are new enough to mention GX Works2 instead of Developer? 2. Is there a max device for each send/recv? (I keep thinking it is 980 per station but no idea where I got this number)( I will increase the max # of transients in the supplementary settings under network range...) 3. Any precautions or advice like, Hey don't do this, I did this once and.... 4. It looks like as long as I use different logical channels for each station I should be able to send and receive multiple "messages" at once with no error?? (I will test this and look for the "no room in receive buffer area f222 error) 5. Will this slow down the Cyclic transfers (I will be watching the SW006D and so on to make sure it does not slow my regular transmission down.) 6. I will be using several special relays and registers in the program of course. Any I should use that are not obvious?
-
Mitsubishi equipment for sale (Q and FX series)
kaare_t posted a topic in For Sale, Employment, Services or Wanted
Hi all. I have some equipment not in use anymore. I'm able to send anywhere in the world for pre-paid items. PM me for prices/questions. Remember to be specific about which item(s) you are interested in as some of the equipment has been used and some are barely used. 1: Brand new (purchased about 1 year ago - never used): 1x 8slot backplane 1x Q03UDE CPU 1x QX80 input card 2x QY80 output cards 2x Q68TD-G-H01 temp input cards 2: Used for LAB about 2 years: 1x 8slot backplane 1x Q61P Power supply 1x Q03UDE CPU 3: Used for LAB: 1x Q33B 3-slot backplane (used about 6 years) 1x Q61P Power supply (used about 6 years) 1x Q03UDE CPU (used about 3 years) 1x Q03UDV CPU (used about 1 year) 1x QJ71MT91 ModbusTCP card (used about 3 years) 1x QJ71E71-100 Ethernet card (used about 3 years) 4: Used for production about 7 years: 1x 8slot backplane 1x Q61P Power supply 1x Q04UDEH CPU (used about 4 years) 2x QJ71E71-100 Ethernet card 1x QJ71MT91 ModbusTCP card 1x QJ71C24N-R4 serial card 1x QJ71MES96 Simple MES card 5: Brand new (purchased about 6 months ago, used for two days in LAB) 1x FX3U-16MR-ES -
what is latch clear operation and how is it triggered? Q03UDCPU connected to AB contrologix via ethernet sends data to L or latch relays and i read that it is only reset via latch clear operation. will for example L02 turn off if the bit is not triggered in the contrologix side?
-
Mitsubishi / Melsec / Beijer PLCs SALE
Jure posted a topic in For Sale, Employment, Services or Wanted
Hello! I have inventory that is in very good condition. Working, no signs of wear, professionally stored, very little in use. I sell altogether for a really nice price or piece by piece. I'm located in EU, however I can ship worldwide. List: BEIJER E700 VER 02400A MITSUBISHI A61PEU 5x MITSUBISHI A68RD3 3x MITSUBISHI AY15EU MITSUBISHI A1S-38B MITSUBISHI A68B MITSUBISHI A1S-61PEU MITSUBISHI A2SH-CPU-S1 MITSUBISHI A1S-64AD 4x MITSUBISHI A1S-X80 MITSUBISHI A1S-Y14EU MITSUBISHI A1S-J71C24-R2 MITSUBISHI A1S-J51T64 MITSUBISHI A1S38B 5x MITSUBISHI AJ55TB2-8R 2x MITSUBISHI FX0N-40MR-ES 2x MITSUBISHI FX2NC-485ADP MITSUBISHI FX-485PC-IF Free (with all other): DATA SWITCH A/B->I/O Some cables... Here are high res pictures of this exact items that are being sold: https://www.flickr.com/photos/jurekphotography/sets/72157682320232626 Send your offer to PM or my e-mail: jure_zakon (at) hotmail.com (insert @ instead of (at)). Best regards, Jure -
Dear all, I have Mitsubishi FX1S Series PLC while i am downloading program , i am not able to do it and i am getting error. please find attached image and please help me to solve it.
-
I want the older screen editor version of delta HMI( Version V1.05.81). I think this is the only Version in which Delta DOP-AS57CSTD Model is present.
-
is it possible to import ETS file into FX5u PLC ?
-
Hello! Is there a driver GOT1000 for tia portal v13. I would like to do scada for GOT1000 GT14 using the Tia Portal v13. There is a possibility at all?
-
Hello, I have a Mitsubishi Q02U PLC connected through its serial port to a GS2107 hmi located on the same control panel. I need to add an additional GS2107 exactly the same as the first one at a distance of 80 meters from the control panel. How can I communicate with this new HMI ? Is there a special module to add to my configuration? I really dont know? Please advice. Thanks
-
I have Mitsubishi Q02 CPU and i want to upload program and download the program. Which software should i used ? Also please mention the version of software. i have GX developer 8.03 but this model Q02 CPU is not supported. Waiting for someone's reply.
.jpg.ab4bdacbd75415ee4a44ee0400895a6a.thumb.jpg.83cdde1f1a77c9aa8bca447d6c02783b.jpg)