Search the Community

Showing results for tags 'data matching software'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 145 results

  1. Hello all  i'm looking for some software to record a 100 plus channels maybe with an ascii string from a PLC? i want to be able to assign each channel with a unit and a range, flagging feature would be nice.  - selecting the channels i want to view  - auto start recording - save file and start new automatically  -view and create reports  preferably no additional hardware because of the amount of channels. this is to record an operators every move so in events of damage or plant failure we can quickly identify the problem (point the finger)  many thanks dan
  2. Hello all, i'm looking at installing a completely new network for our PLC system, using a ring topology. at the same time i would like to incorporate the IP cameras and VOIP into the same network.  each system is on a different sub net, PLC = x.x.1.x, Cameras= x.x.2.x, VOIP= x.x.3.x estimated camera traffic will be 25 Mbps, PLC 10 Mbps, VOIP no more than 1 Mbps  switches would be capable of 100 Mbps  question: managed or un-managed switches? if it is possible to use un-managed without affecting operations then this would be a massive cost saving    please only comment if you have practical experience implementing this  many thanks Dan  
  3. Software for Dynapro terminal

    Hello!  I have a Dynapro ET3170W touchscreen terminal from which I would like to upload the screen configurations.  I have tried Google searches and not found anything except user manuals.  3M has not been any help either. Can anyone tell me if there is a software program to do an upload or what I would need software wise to do it? I saw something mentioned in the application developer's manual about a TCS software package, but have not been able to find anything about it. This is really the only hurdle left in the project I am working on, as a Maple Systems or Direct Automation terminal can do the same thing as the Dynapro, I just need to know what commands are sent from the various screens.  Thank you in advance for any help.
  4. Does anyone here use this? Control Draw If so how useful do find it? Worth spending the time on learning or better off with another product? If so what? My application is going to be for in-house management and design of control systems for a food manufacturing plant.   Thanks.
  5. Hello I am kind new at Allen B. PLC and i have to make some changes in the PLC program: - add 2 safety switches. - add 4 photo sensor. just want to know what software do i need to make changes online. PLC \I have is  SLC 5/03 1747-L531 also have a touch scream terminal that i need to modify   panel view C600   thanks for your help guys.
  6. Now introduce a new product, Kinco HMI MT4414TE-CAN from FastToBuy.com This HMI use 32-bit RISC CPU and streamlined LINUX kernel, you can display a variety of true-color graphics format, and its superior processing speed and software to meet the needs of most users. and with a memory 128M FLASH + 64M SDRAM. The Kinco series HMI configuration editing software (official version): _Kinco HMI software_V2.2_Build131108 is Automatically installed in this product. View more info click here
  7. Hello, I'm looking for a simple data logging software, something that doesn't require any programming skills. Thank you!
  8. I have Omron CP1H PLC and using Ethernet Option board to communicate through Ethernet. When I connect PLC to 2 Computer it starts malfunctioning and values in register get fluctuate. while I connect single HMI it works fine. Kindly give solution if anyone know. 
  9. Omron Learning Curve - DATA TYPES

    Hello Everyone, Recently getting into Omron and I am wishing to pursue this type of PLC and software for a staple in my career. I have recently just graduated from a program involving PLC mainly Allen Bradley and one thing I have to say is that while making the transition from AB to Omron, the main difficulty I have had was with data types, specifically BCD, UINT, and CHANNEL. I am currently using the CX Programmer software for a few PID loops and they are causing me some great difficulty because normally I would just simply enter in all my values into a huge PID block in AB but that is not the case when it comes to CX-Programmer. Can anyone point me in the right direction of some manuals or e-learning places so I can quickly get a grasp on this so I can move ahead with the code. It is frustrating when you know how to do something and you just can't figure out how to put it into a software you aren't familiar with. Thanks for your help
  10. Hello All,   I really need help with a full version software of DM value editor for Keyence PLC. All the ones I have found dont seem to work or might be virus.... All help will be really appriciated! Thanks
  11. CX Designer using tables - Help

    Hi all, I have been getting to grips with the different graphic displays in CX One Designer but I am having trouble trying to produce a table which shows column one as a label and column 2 as data value that I am polling from a Modbus slave. From what I have read/tried the data block table seems to require a csv as the data source and I cant seem to achieve what I want with the standard table. If anyone can advise how I might be able to achieve this I would be extremely grateful. Below is the sort of thing I'm hoping to achieve but in a table format:   Bearing 1 Temperature 80°C Bearing 1 Vibration 0.2 mm/s²         Bearing 2 Temperature 82°C Bearing 2 Vibration 0.2 mm/s²  
  12. C28P processor

    I purchased a couple of C28P units on Ebay, thinking they were I/O units which I could connect to my C28K. Unfortunately, when I tried to use syswin software to enter a ladder program into the units, I got rejected by the software.  Can someone tell me what software I need to communicate with C28P.  If not, does anyone want to trade these units for C28K.. 
  13. UDTs to Custom Data Structure

    I have a reference HMI project that has many variables that have an Invalid data type. We are one by one trying to re-create the data types that are missing, but so far there is no easy way that I know of. Currently I re-create the UDT from scratch in a scrap offline project. (based on just looking at the variable elements in the ref project. Export the UDT to .XML file Import the UDT as a new custom structure into the toolbox At this point I can drag the structure from the toolbox into my variable list, and it creates a variable with what looks like a good structure. What I cant figure out is how to easily re-assign the old variable the new custom data type. Since the old variable is used all over the place, it cant be deleted, and if I rename it it changes every reference to it that exists, so that doesnt help either. The image posted shows the old variable "H_Header" and its properties as invalid type (also shows red X in the icon). below that is a new variable with the new data type. (no Red X). If I could delete H_Header I could then just rename the new variable to the same, but I cant because of its use. If I could change the data type from Invalid to H_Header, that would work, but its greyed out and wont let me change it. Any help appreciated    
  14. Good day  I require some assistance with the configuration setup (GX Works 3) for FX5u PLC inter-communication (PLC to PLC), over Ethernet (using the built-in Ethernet port). The purpose of the inter-connection is data exchange. (Values stored within the PLC storage registers such as words and bits).  Does anyone perhaps support files on this such as a procedure or example? Thanks
  15. View File Excel Add-in for GE-IP PLC Data Logging ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2016 spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for GE-IP PACSystems (RXi, RX3i, RX7i), Series 90 (90-30), and VersaMax communications. No OPC, DDE, external drivers, or programming required. Submitter Automated Solutions Submitted 03/01/16 Category Demo Software
  16. BBG Management Corporation has three long-term contracts opportunities for Factory Automation Specialists in Columbus, GA.Requirements:At least 3 years of work experience as a technologist in a range of shop floor manufacturing applications (with a focus on manufacturing machine tools/robotics)At least 3 years of experience with machine tool PLC and SCADA software programmingAt least 3 years of experience with data collection and reportingStrong interpersonal and communication skillsFamiliarity with a dynamic shop floor environmentStrong mechanical skills/know-howFamiliarity of the Ignition software package is a huge assetIf you feel that you would be a good fit for this position, please contact our recruiter Andrea at andrea.nemer@bbgmanagement.com. Or, apply directly on our website at: https://bbgmanagement.com/careers?t=5&b=X2PUKIEMCALPSJOCDCH2O7FB2G7A7UZPVPEIYFMHDCFA2IF2I4FILAS6USM6ICE4BNXRBUMXELDSS5WX2VXVC%3D%3D%3DOur jobs are also available on LinkedIn and Indeed.BBG Management welcomes and encourages applications from people with disabilities. Accommodations for disabilities in relation to the job selection process are available upon request.
  17. CP1E RS232 Setup

    Hi everyone, I am fairly new here, I have a CP1E-N40DR-A And i need to send a string of data to a printer over rs232 from the built in port on the PLC, I have had a look online and canot find any information on what I need to do. all the tutorials are for CJ2 cpus ect and the instructions that I would normally use on a CJ2 dont work on CP1E PLC's. Any help or light shed would be great,  Thanks in advance
  18. I would like to use the actual Cycle Time (in seconds) of the NJ101 CPU in a Structured Text  math equation.  You might also call it the Task Period... However it's called, It needs to be the amount of time that has elapsed from the last calculation of the ST math equation.  It must be a variable that also satisfies this looping equation: Time:= Time +cycle time .. so that the master equation, which is calculating position information, based on TIME .. is up to date with each calculation in the loop. How do I insert that cycle-time, which might not be identical for each loop, (or, is it) ?  Thanks, Regards, Michael  
  19. how to check display type?

    Hello, I have a silly yet anoying problem, How can i check the used NS / screen type in a current x designer project? So i have a project, and i need to get a display to test it, but i need to check what is the display type.
  20. Emersion plc

    Please help me for emersion plc Ec-20 programing software download link  
  21. Emersion plc

    Please help me for emersion plc Ec-20 programing software download link  
  22. Iwo

    Hi ALL, I have a GE PQMII,Redlion Data Station & GE LM90 30 PLC I am trying to map data out of the PQMII to Redlion using Modbus-RS485 and then using Ethernet (TCP/IP) to map data from Redlion to GE LM 9030 PLC. I know Modbus uses hexadecimal and PLC Registers are in Decimal I need a technical procedure on how to configure/program Thank you Chris Ok Tedi Mining Limited
  23. Hi dear , may anyone can help me.. My Computer has broken so all my software include cx programmer and Designer has been disappear. Where i can get free software CX One for free , thank a lot .. Best Regard
  24.  Hellow Mitsubishi Experts    . I want to update my system . My machine have Mitsubishi plc system . Details of plc - CPU FX1n-60MR-001 Expansion Module FX2n-8EYR  . We have two factories .In one factory have this Mitsubishi plc system (LOCAL Location ) .So from other factory (Remote Location ) I want to check some plc data via internet using some interface (Ex visual studio interface )  .It is mean I want to remotely check some data (machine production units ,machine speed and etc )  . I have plc program and plc software .   So what i want to add external modules to this system .?   How can i implement my design ?.   . I m appreciate ur immediate reply .       Thank you.   Tharindu  
  25. GX Works3 Projectlib Locked

    Hello, I have a problem that I need to solve in a PLC program has it's projectlib locked.  I work for a company that contracted a PLC programmer before my time to program their new version of their control cabinets. The company did not write any specific contract with the contractor and just relied on his work. The guy later delevered a buggy software that is kind of functional (the bugs came up at the commissioning after the guy was paid and now he refuses to help or to provide more consultations). I have as a task to freshen this up and make it work without bugs, the problem is that the Projectlib is locked and I cannot access the source code.  The only thing that I can changes that I can make to the code is to put some logical circuits between the I/O of the already existing function blocks, which solved some problems, but not all and it keeps one of the most important ones as well. Anyways, that's my story, so now my question is, is there and possible way of unlocking the projectlib? Any feedback would be highly appreciated. Thanks in advace!