Search the Community

Showing results for tags 'data exchange omron nx1p2'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 619 results

  1. IFIX Scada communication issues

    krysmberg posted a topic in GE

    I am new to ifix, I am having an issue, I am unable to receive any information, after attempting to fix the fact that the view was only pulling half the data I lost it all, I had a back up saved, but it didn't work on restoring communication, I was getting a cannot connect to node error, but I have fixed that, now all I am getting is question marks. essentially I believe that I have two standalone computers with the ifix software and the communicate directly with various plcs that share information across, either a ring topology or full connected. so the computer I have that is working is setup with scada and the database and MB1 with no network support, the one that is not working is set up the same, my cable connection is a usb to Ethernet and im communicating with a Comm port on the computer. I've tried different comm ports, even contacted GE, they were suppose to have someone call me back but no one has yet. Can anyone give me an idea of what I've got wrong here?

  2. CP1E MODBUS Maximum Slave

    innoaloe posted a topic in Omron

    Hello everyone, so I noticed in Omron's CP1E manual, there are no certain info on maximum number of Modbus Slaves that can be attached, however the PLC itself able to connect to slave number 1 - 247 I have read from common MODBUS specs, that 32 slaves are the limit for most MODBUS connections. However there are also statements that with proper design (1/8 transceivers) that we can extend number of connected slaves to 256. Anyone have experience or info about this with Omron PLC? Thanks in advance
  3. Thanks for any help.

  4. plc to pc using fins

    leineme posted a topic in Omron

    i have this code in c# in order to communicate to cj2m using etheret cable , but i get a connection error ( u can't reach : 192.168.250.1 :9600 ) is there any configuration that need to be done on the plc ? i mean i don't quite get (the node and all thoese properties i fnd on cx-programmer) ?

  5. HOSTLINK Problem

    initial posted a topic in CX-Programmer

     I  am doing  a data collection from  OMRON PLC CP1L through MS excel VBA  use API function. The connection was setuped correct (I think)both in PLC and PC side. The trick things is   when PLC have USB cable connected  the data  was send to PLC and can get feedback through RS232 in normal.(I use portmon moniter the progress,and I can see the data (C-command ).But when I get the USB cable removed  ,The PLC can not get any reponse back.Dose any of you have met that  before?
  6. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software

  7. 502 port error

    leineme posted a topic in HMI & SCADA

    Hi  i am trying to connect to omron plc (cj2m ) using modbus tcp/ip , by using the port 502 i  get an error saying that the port can't be reached is there any method to fix that or change the port number ?   thank you 

  8. Excel Add-in for Modbus/TCP Data Logging

    Automated Solutions posted a file in Demo Software

    Version 3.11.2.0

    422 downloads

    ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2021 (version 16) spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for Modbus/TCP and Modbus RTU/ASCII communications. No OPC, DDE, external drivers, or programming required
  9. View File Excel Add-in for Modbus/TCP Data Logging 3.6.8 ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2016 spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for Modbus/TCP and Modbus RTU/ASCII communications. No OPC, DDE, external drivers, or programming required Submitter Automated Solutions Submitted 03/01/16 Category Demo Software

  10. Excel Add-in for GE & Emerson PLC Data Logging

    Automated Solutions posted a file in Demo Software

    Version 3.11.2.0

    84 downloads

    ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2021 spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for GE / Emerson PACSystems (RXi, RX3i, RX7i), Series 90 (90-30), and VersaMax communications. No OPC, DDE, external drivers, or programming required.

  11. Excel Add-in for Allen-Bradley Data Logging

    Automated Solutions posted a file in Demo Software

    Version 3.11.2.0

    518 downloads

    ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2021 (version 16) spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for Allen-Bradley ControlLogix, CompactLogix, MicroLogix, Micro800, PLC5, and SLC500 communications. No OPC, DDE, external drivers, or programming required.  
  12. View File Excel Add-in for Allen-Bradley Data Logging ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2016 spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for Allen-Bradley ControlLogix, CompactLogix, MicroLogix, Micro800, PLC5, and SLC500 communications. No OPC, DDE, external drivers, or programming required.   Submitter Automated Solutions Submitted 03/01/16 Category Demo Software

  13. IFIX Problem

    N_Locus posted a topic in GE

    I have restored a crashed IFIX to a new PC. The restore is ok and installed GE9 driver. With the GE9 power tools, we can observed that data transmits and recieve. The problem is that the screen scada is not updating i.e. no status/feedback, anything is happening. The LAN network TCP/IP was configured i.e. IP, subnet and gateway. Any remedies/advice is most welcome. Please provide a guide on the communication/configuration setup. Thanks

  14. port 502 error

    leineme posted a topic in Omron

    Hi  i am trying to connect to omron plc (cj2m ) from my pc  using modbus tcp/ip in c# , by using the port 502 i  get an error saying that the port can't be reached is there any method to fix that or change the port number ?   thank you 
  15. Hi, I work as an industrial programmer primarily dealing with Allen Bradley, Mitsubishi, and Omron PLC's as well as various peripheral devices. I would like to begin the process of learning computer programming as it pertains to the manufacturing industry. I'd like to learn how to write databases (SQL, etc) and VB apps and eventually I'd like to be able to write applications that can communicate with PLC's and other devices (although the last one would be a ways down the road).  I have very little experience with computer programming so I don't really know where to start. What language should I learn first? What free software is available to learn with? What resources do you recommend I use? I've downloaded Visual Basic Express and found some introductory courses online that I've just started but if there is something else I should've started with I'm open to suggestions. Thanks

  16. Program 16 position rotary selector switch

    michael.southerland posted a topic in CX-Programmer

    I have a 16 position rotary selector switch I'm trying to program to a CQM1 PLC, that I will also be programming to a micrologix 1200 in the future, using CX Programmer. The switch connects to the PLC using 4 inputs, and activates the inputs in a binary pattern 0-16 as I turn the switch. For example: if the switch is wired to the first four inputs of the PLC, and is turned to "9" 0.0 and 0.3 will be activated and 0.1 and 0.2 will not, just like binary 9 = 1001. I have tried several things trying to get the PLC to accept these inputs as a single "data-point," and then convert to BCD or Hex to use in a timer. I'm having no luck! Does anyone have any ideas how this is done? The switch is a Tosoku DPP01 015L20RCB, and because of the age of the PLC my instruction set is limited. Thank you in advance!
  17. Product:             STEP7 Professional V13 Reference:           FB Declaration Static: Data type TON is not allowed here Description: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Hi, I'm using Step7 Prof V13 SP1 upd7 & WinCC Adv V13 SP1 upd7.    In my project I'm using a 312CPU, Article No.: 6ES7 312-1AE14-0AB0, Version: V3.3 & TP1500 Comfort, Article No.:6AV2 124-0QC02-0AX0, Version:13.0.1.0   My Issue: I've taken previously used FB from my Global library and inserted it into my new Project. In this FB I've declared an IEC Timer (TON) in the static section of the FB. When I go to upload to the PLC after TIA carries out the compilation I get error message 'Data type TON is not allowed here'. I've tried creating a new FB to test and had same issue for CTU,CTD,TOF.   See attached pics This is really strange as it has always functioned before! Has anyone seen or heard of this issue before? I'd appreciate any help, Cheers.
  18. Good Day! i have an omron hmi and i would like to connect it to sengenuity wireless temperature sensor without a plc..is it possible?.. see the youtube link for the video sample https://www.youtube.com/watch?v=F_MPLS9ih4g         Thank You for your help.  

  19. PLC sources?

    jjomron posted a topic in CX-Programmer

    Hi guys, Im new to PLC and im just starting out with the omron cp1e-e. What are great sources for ready files? Is there anywhere online where i can look at different programs for different scenarios ? Thank you

  20. thesis project

    magic_banana posted a topic in Other PLCs

    Hello, For my thesis i'm using a beckhoff cx9020,a sunnyboy and a sunnyisland with rs485 communication protocol sma net. One of the things I need to do is to log everything from the sunny devices realtime. and here is where my problem starts. I am using rs485 to communicate with the devices via plc but I don't find any documention for what i need to request or send to get usefull data. does anyone here have an idea? Yours truly Jonas Vanhulle
  21. Hi, there, I'm totally new to OMRON PLC, right now I'm using CP1H PLC have two CP1W-CIF01 on it 1st CP1W-CIF01 set as 115200, 7,2,E, Host Link, station 0 connected to Pro-Face HMI 2nd CP1W-CIF01 also set as 115200, 7,2,E, Host Link, station 1, I want to use this COM to talk to my PC that I can run vb.net program to monitor the bit and set the bit value. can you guild me how to start this project? thank you very much! Chen

  22. Data Historian Speed

    Shawn Ebersole posted a topic in HMI & SCADA

    I was just curious on which type of data historians are considered fast at retrieving historical data.  For example, if I wanted to trend a tag at a one second interval to review an event that took place a year ago and compare that to the same tag in real-time, what historian does this the fastest?

  23. CP1E with expansion card

    kino17 posted a topic in CX-Programmer

    HI, i am new user here and it is my first time using Omron PLC.I fail to add the expansion cards (CJ1W-3ER AND CJ1W-ADO41) to CP1E-N40 CPU.There is no I/O table listed for this model in CX-programmer.if i change to other model, yes, there is IO table, but CP1E without the table.   Appreciate for the help to add in the expansion card in CX programmer. Thanks in advance.

  24. PLC Input Output sequencing

    ACMCspark posted a topic in Mitsubishi

    Hi all , new on site and looking for some help please. Need simple solution to the following example. Imagine a clock face. At every 45 degrees , I need an input and an output from the same input some milliseconds later. Before I get to 90 degrees , input 1 is now off awaiting input 2 at 90 degrees and so on. For my 360 degrees , this would require 8 inputs and outputs with only one input / output active at any one time with the program repeating the sequence continuously when back to zero degrees. Info please on suitable small inexpensive PLC and any suitable position feedback device , thanks , Al..//
  25. I need some help and advice communicating between an Omron PLC and a Keyence KV-5500. My system typically uses an Omron CJ2M-CPU34 which comes equipped with the built in Ethernet IP port.  My customer is insisting that we change the CPU in our system to a CJ2H-CPU66-EIP in order to communicate with the Keyence KV-5500.  They have not been able to detail why their communications require the CJ2H, they just say they will be using Ethernet TAG communication and for this they need us to change the CPU. Has anyone successfully established communicated between the Omron PLCs and the Keyence?  If so how did you do it and which CPU did you use?  Is there an .eds file available for the Keyence CPU? Please help!!! They will be visiting from halfway around the globe to test communications in January so I want to be prepared!