Search the Community

Showing results for tags 'cx designer alarms'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 144 results

  1. Good day everyone, As everyone knows, NB designer is not as good as CX-designer in general terms. My case is this one:  All systems at my company use NS series and some of them NT series PT's.  So there're 20 of them, or so.  Now, I have bought a new NB5Q-TW00B, and I need to program it. Is it possible to migrate the program from a NT or NS, to a NB ??  I've read you have to design all the project again.  It'd take value time just to copy the same project.  I think it should, because it's the same brand of Operator Panel, Omron.   Thanks.
  2. hey!  I'm pretty new to PLC's, and I'm supposed to ''teach'' the people at my internship how this PLC works, but I have encountered a problem.  I've gotten pretty far with all the digital programming and understanding how everything works, but I just can't figure out how the analog inputs/outputs and programming works...... I've had a fair explaination on PID and how this works. I've searched the web as well to figure out what PLC instructions to use.    I hope you can answer my following questions.    1, what are the most used PLC instruction blocks which I can use for temperature control, and how am I supposed to use them? 2, Could you please give me an example on how to use PID and what numbers will I need for the calculations? 3, what are the most used PLC Instruction blocks (apart form the analog ones) that I should include in my tutorial?   this is my setup: Ethernet switch MOXA EDS-205 Plc voeding PA202 PLC CPU CJ1MCPU11-ETN Digital IN (16x) CJ1W-ID211 (SL) Digital IN (16x) CJ1W-ID211 (SL) Analog IN (8x) CJ1W-AD081 (SL) Analog IN (8x) CJ1W-AD081 (SL) TRANS OUT (16x) CJ1W-OD212 (SL) TRANS OUT (16x) CJ1W-OD212 (SL) Analog OUT (4x) CJ1W-DA041 (SL)   thank you soo much for looking at my question and considering helping me! the OMRON helpdesk hasn't been very helpfull.    kind regards,    Deuslupos,
  3. NQ Design and CX-Programmer

    Hello! My name is Gabriela. First, I do not speak very good English. I have to do a project! I have a HMI (NQ3- TQ000B) to OMRON for a teaching platform. I installed NQ Designer for it. I did the program in CX-Programmer . But I have a misunderstanding. How can I connect the CX with NQ . How can I assign internal bits set from CX-Programmer in buttons from NQ-Designer? In the end, I would like that after I connected bits with buttons and I transferred the program to HMI, when I push the button on the HMI interface, the platform to do what I programmed in cx.
  4. Can't open *.GTW

    Hi all, I have project and I saved as compressed file. But, I open in other PC again, it can't open and alarm as image attach. If any person have same problem and have solve, pls share it for me. Thanks and best regards!
  5. PCS7 addressing

    Hi,   I am a bit rusty on PCS7. We have a nuisance alarm and I am struggling to identify the input. S7Prog/@(6)/4_AO_HART_3           Module 1/9/14 I think the clue is in the module addreess. What do the 3 numbers (1, 9, 14,) refer to
  6. PCS7 addressing

    Hi,   I am a bit rusty on PCS7. We have a nuisance alarm and I am struggling to identify the input. S7Prog/@(6)/4_AO_HART_3 Module 1/9/14
  7. Hello. We have in the company machine from China. Omron HMI panel NB7W TWOOB. When you upload a project program NB-desinger 1.36 Windows writes the program stopped responding. And then when decompiling .pkg file comserver.dat font_1 font_2 font_3 font_4 font_5 gui.dat ?????????.pkg ?????????.rcp servo.dat Error fonts. Error macro files. How do I install fonts And what problems Upload project I need your professional advice. Thank you
  8. Hello!!! I want to make one conditional alarm in the FT view SE v6 like : If {bsh_connected} Then If Not {ethernet_fault} Then If {cam fault} Then 3 Else 0 Else 1 Else 2 Please lemme know how can i make it in Alarm and Tag server without writting in he PLC.
  9. Hi guys, I recently was asked to configure a computer to host an Factory Talk SE Client application. I was able to get everything working except the trends and the Alarm window, all I have is the cross hatch screen. at the bottom of the screen it is saying cause: Trend: CAB file missing on the server: http://hmi1/RsviewActiveXControlSetup/RSTXView2ocx.CAB. I have worked on this for a while and am stumped. All the other computers on the same domain network are working fine, so it leads me to believe my problem is with my installation on the new computer. Any suggestions or if you need more input please let me know. Thanks
  10. Dear friends. I faced one problem of recipe working. Could somebody help me? I try to create recipe and use it in my program. Fisrt of all I decided to learn how it working and for this I used documentation NB-Designer Operation Manual. I created my test program, but it doesn't work as I need. Bellow I want to describe, what I need: I want to have 5 program with 4 parameters and download these program with parameters inside to the PLC. In attachment you can see my program. test.zip
  11. Hi, to all. I have a question concerning the current alarms of CX-Supervisor, I'm using the version 3.22. I want to do a custom alarm view where the alarm messages have a different colors depending on the priority (ex. red for high priority, yellow for medium priority, etc...). I want also that the alarms are ordered by date & time, first the latest. The alarm object is not good because doesn’t allow to order by date & time and you can decide only one colour for all the alarms.The current alarm dialog box allows to order the alarms but non to customize the colors. I did some test and I've seen that I can fill a list with different line colors by using the ActiveX object Microsoft ListView Control 6.0, but I need the current alarm list to do it. I don't know where to get this list. The alarms history is stored in the .UAL and .UAB files but I didn't find any file with the current alarms. Does anyone know how to get the current alarms list? Does anyone know another way to have the same effect? Thanks in advance
  12. I have an interesting problem. On my NQ HMI, I am changing one bit of the alarm word to true. The first time I do this, one alarm becomes active, and appears in my alarm list on my HMI. Then when I change the bit back to zero, the alarm becomes inactive. Then when I make the bit true again, the alarm does NOT become active again. Nor does a new alarm appear at the top of the list. What do I need to do to make a fresh alarm appear in the list? Any input would be greatly appreciated. Thanks in advance.
  13. Where can I safely download NQ designer? Thanks in advance.
  14. Hi Guys I'm new to Omron PLC's and the NB HMI series terminals. I have a question regarding the status of a currently logged in user. What memory area bit can I check to see if a user is actually logged in ? Secondly, where can I find a document that shows the memory areas and any system words/bits ? I found bits and pieces here and there but nothing that shows the memory area layout in full. Regards Steve
  15. Hi everyone, Im quite new into OPCs, I'm using adam 4015 6channel RTD module to measure temperatures and then connected to adam 4520, I would like to know how to connect the adam modules to cx designer (or if have to make any program in cx programmer) as i want to have a GUI of the temperature measurement. Thanks in advance
  16. I know that I can printScreen screens one by one from the offline test in NB Designer. I was wondering if there was a way to automatically save-as-JPGs all screens in a project? (Just like you can do in CX Designer.)
  17. I'm new to Omron, and after several days of diving into manuals trying to figure this out on my own and giving myself a headache I've come to accept that i need help. my task is the following: Control of the discrete and analog inputs/outputs in a DeviceNet system using an Omron CJ1M PLC’s and PT’s. Use at least one thermocouple, one analog input, and one analog output for the DeviceNet network. Use a pushbutton and a light for the start of the process and an indicator for the started process. I have a Drt1-Ad04 input, a Drt1-ad02 output, and a Drt1-ts04t temperature control. My devicenet is Cj1w-drm21, The Omron system itself is a cj1m-cpu13 etn21. I have node addresses for my input, outputs and temperature control, those being 35 for input, 25 or 30 for output and for temperature control 5, 15, or 20. The ip address im using for this project is 142.214.143.9I'm using Cx programmer, Designer and Integrator. On Cx programmer I've managed to create an IO table but i have no idea on how to begin the program or even get a current reading from my generator.On Designer I've made what i believe to be the layout of the pushbuttons, I just have no idea of what addresses to enter.And on integrator i'm having troubles on figuring out how to make a routing table. I've went through many manuals and either i'm missing something really basic here or I just have no idea on what I'm doing. The only advice I was given was to dive into more manuals and find my addresses for my inputs, outputs, and temperature or to find the information from an outside source be that a forum or customer service. I am able to provide more information, and screenshots of what I have done if needed. Any kind of help would be greatly appreciated!
  18. Hi, Is there any good documents out there on how to download to a NS15 Omron HMI from CX-Designer via Ethernet? Thanks, Andrew
  19. Dear Mr/Ms, I using GT designer 3 to simulate have to use GX developer. But I can not install GX developer, just using GX works2. So Can I connect GX works 2 and GT designer 3 to simulate.. Please help me to slove this problem.. Thanks & best regards,