Search the Community

Showing results for tags 'cqm1h error'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 154 results

  1. Error on connecting to plc

    Hello, First thing, I'm new over here, so probably I don't know everything, and second thing, sorry if my English is worse than I think :( Now, what's the problem: I have CQM1H - CPU51 plc, and until yesterday it worked fine. But when I tried to look into its communication protocols via cx-protocol, something went wrong as I suppose. Since that, I'm unable to connect to plc - usually message is "Failed to connect, check following:..." or sometimes "No response from plc" (which probably means that there is connection if pc can send data to plc?). LED "comm" on plc is not blinking when I'm trying to connect, so it looks... not good for me. I tried using rs232 port in cpu unit, on serial communications board, only peripheral left, because I don't have matching cable. Anybody knows how to make communication work again?
  2. So a little new to PLC's especially Omron PLC. I have this machine from Japan that uses Omron CP1L which needed some modification. I made the modifications and uploaded it on to the PLC. When I try to put it in "run" mode it gives me the "Failed to change the operating mode the operation mode may be still changing in the PLC" error. After that the machine does not move even with the orginial plc logic. At first I thought it was my logic and so I double checked and did it again. Same thing occured. Has anyone experienced anything like this? How can I fix the PLC? Thanks
  3. Help plz cqm1h cpu 51

    I have upload a program from the cqm1h cpu51 by cx programer But when tried to combile it there is an error @7seg what dose that mean I tried to upload it with syswin . At the begining its ok bu at 22%   error. Program block error step 0001 What can i do for this It is a huge program And i need to add some new steps Pleas help me
  4. The production environment has had a CX Supervisor package running since 2006. the internal computer finally bit the dust... We have managed to install XP on another PC. Supposedly it was all installed correctly off site and tested to run OK offsite. When connected to the (PLC) machine CX-Supervisor [v1.33] gives an error 1007. Probably its an communication error. It seems that the back-up runtime version (sr2) was CX Supervisor v.2.1 from which we don't have a hash dongle. We only have a v1.3 version.   According to the omron helpdesk, the only thing we can do to test the connections , is to install a v2.x trial version with the .sr2 file. There is no need for a usb-dongle in a trial version and it wil only work for 30 days. That would be sufficient for us, because the repair of the build-in system will take about two weeks. For now a complete production-line is out! In short: We urgently are in need of CX-Supervisor v2.x trial installation package. If anyone knows where to find it, it will be appreciated. 
  5. Download program to Memory card

    During downloading the program, in order to transfer it should be in a program mode. Now the CPU has no battery so I'm forcing AR14000 to download the program in the EEPROM. but I'm getting a Fatal error Memory Fail. Is my procedure correct or is there another way to download the program into the EEPROM? Hardware details: 1. OMRON CPU: CQM1H-CPU51 2. OMRON MEMORY: CQM1-ME08K
  6. CX-supervisor

    I want to send data from internet to cx-supervisor via cx-supervisor website but error. i don't know how to resolve this problem .I attach photo below, people help me with
  7. Program lost after power cycle

    Anyone can tell how to retain the edited(downloaded) program into the omron PLC? it's my first interact for this brand but when I try to downoad my program into the cpu it works as long as it is power on, but when we turn off the power for the whole machine and power up, the program that I downloaded previously is removed. Is there a facility like a "Copy RAM to ROM" in siemens here in omron software? how can I download the program without losing it? Thanks!!!
  8. hi guys, i want to ask about cx supervisor development 3.0. i have problem with my cx supervisor. my cx-supervisor cant run, but can built succesfully. my cx supervisor 3.0 development version, my cx supervisor problem like this. do you have solution ?thx for attention,sorry for bad english best regards
  9. CQM1 fatal error reset

    I have a fabric handling system using a CQM1-CPU21. When I started it , I got  error # 0x00F1. Also associated with it  are bits flagged AR1615 and AR1415. I have the programming code on a PC. I tried an error reset and now I have a stack of NOPs. I am not seeing the IO table using CX-programmer. Thank you.    
  10. mrj4

    hi all, anyone can hep..i use servo mr j4.. now got error 121..anything can help..i read from manual error code but cannot understand..
  11. hey, I'm making a program with vijeo designer with a HMIGTO5310 and with somachine basic and a TM221C16R. At the moment i don't have my TM221C16R yet but i'm able to run the program in simulation on my pc and connecting the hmi to it. I'm able to control everything on my hmi but the moment i'm trying to activate the webgate, vijeo refuses to download the program to my HMI end gives the error " error 1850: [target] [target1] secondary drive full or not found. check the data file location setting.". Is this because it isn't connected to a real PLc but a simulation of it or is it because something else?
  12. I'm trying to import .gsd files but an error occurs and says : "IntegrationManager: 'xddRootDirectory'-parameter is no valid/exisiting directory !" The second error that shows is : "Path information incorrect: The string C:\users\name.surname\Desktop\GSD\s0100008.gsd is not a valid path." Has anyone encountered this problem and maybe found a solution to it?
  13. Hello I downloaded a .mer file on the Panel view 1000 but it shows errors on the display graphics. i have configured the Rslinx communication several times by selecting the rigt PLC in Design and Runtime mode. I am using Facotry Talk view 8.20 and creating 5.10 runtime file. Please advice. I was able to correctly download and use the HMI on a similar machine. I dont know what am I missing on this one.    Thanks Pratik Jain
  14. NB7W System Error

    I’m programming a OMRON NB7W-TW01B with NBDesigner and after I download to the HMI updates I made to the program, when the HMI initializes it shows “[0] System Error” for a while and then it disappears, not showing again until the next reboot.   The manual only says it is an HMI internal error and nothing more, leaving me clueless about what I can do to fix this issue… I already have updated the kernel and rootfs of the HMI, nothing changed.   What do you guys think the issue is, what should I check to try to fix this problem?   Thank you very much for the help.
  15. Hi, I have a question about error clear on Mitsubishi Q Series (Q03UDE). Is there a way to clear 4100 error without power cycle CPU??? I've cleared the cause of the problem and I've tried to clear CPU error using SM50. I've put code 4100 into SD50 and then turned SM50 off and then on again, but CPU is still in ERROR state and I cannot switch it back on into RUN mode. I have to turn the power off then on again and that is solving the problem. The problem is that sometimes it is very hard to get to control cabinet to power cycle CPU. I would like to clear this error remotely if possible. Any ideas???
  16. Hi everyone ! I have a little project wich involves communication between two Micro820 controllers via TCP/IP. To do that, I started to work with TCP/IP socket. Within CCW (Connected Components Workbench), I tried to create a new socket instance using the instruction SOCKET_CREATE and set the socket address to 127.0.0.1:21. Basically, my computer through the FTP port. The problem was that it couldn't create a new socket instance (error variable is set to TRUE and status is set to 4, wich I don't know the meaning) because I didn't have a server-side application that listens to TCP/IP socket requests. That said, I found an open source application called SocketTest that listens for TCP/IP socket requests on a specified IP address and port. So, I started a listener on the following address : 127.0.0.1:21, but the error variable is still set to TRUE and status is still set to 4. So, my questions are : Is my IP address OK ? Is my port number OK ? What means the status code 4 ? Is SocketTest doing what I think it does ? Do I need to do something else before using the SOCKET_CREATE instruction ? Thank you in advance for your help !
  17. Hi everybody, Recently, I started working on a project. I want to develop a program for a Micro820 controller (2080-LC20-20AWB) using CCW (Connected Components Workbench). I built a little motor circuit for testing purpose. However, after building the program and downloading it to the controller, I tried to connect to my controller via CCW, but I can't. When I click the button "Connect", CWW crashes OR a window saying : "The controller has unnacepted changes" appears and asks me if I want to "Download current project to the controller" (wich I already did) or "Upload the project in the controller to overwrite current project content" (wich is grayed out). When I choose to "Download current project to the controller", CCW starts downloading the resource, but fails. In the "Output" window, there's a line saying : "Download failed for Device:Micro820: An error occured while reading from GETACTIVERESOURCELIST.". The problem is that there's no documentation at all concerning this error. I even tried to reinstall CCW, but it didn't fix the problem. I joined some images so you guys can see what I'm talking about. Don't mind asking for more details !
  18. Error 6706 Mitsubishi FX2N

    Hey guys, I'm really a newbie on PLC's, I'm working with a metal sheet folding machine. The past programmer gave me it's code, but I guess he gave me the wrong one. So, I uploaded the program with GX Developer 8 to a Mitsubishi FX2N-32MR PLC, all looked fine until I tried to run out the program. The error 6706 appeared up on step 3928 (blue rectangle). I read something about it already in other posts. But I'm not quite sure what to do. Can someone point me on the right direction? I attached an image where the problem thst showed up.  Thanks. 
  19. Dear Support Team, We have a problem in our AB PLC 5/60 Enhanced device(1785-L60B/E), it is a redundant AB PLC system  and controlling a Water RO plant. Another paralleled connected system is working fine. 1. Once power went down and power up, the PLC started showing "PROC" error- Steady RED. Loaded the program from EEPROM, the PLC "PROC" error is gone but the DH Channel A RED LED is started Flashing. 2. After loading the program, the program vanishes automatically even when there is a power, and again showing "PROC " Error - Steady RED. Changed new Battery. 3. Looking for the replacement processor,  found same series and part number but the Firmware and REV is different. Advise the selection of suitable replacement. 4. The PLC program is password locked. Any solutions or work around to solve the issue.    
  20. CONVERT FROM CQM1H TO CJ2M

    Hi there, I would like to ask you regarding the conversion PLC. Usually, it is not a surprise for us to get the errors occurring for the PLC conversion especially if both PLCs are not in the same compatible programming software. What I mean, currently, we have a lot of older version of PLC such as C20, C40H, C60H etc and these version needed to be converted to the newer version. However, lately we have problem converting the CQM1H to CJ2M, whereas both PLCs using the same programming software, CX-ONE software (ver 9.6). Most of the errors are displayed like this: ERROR: Step at rung 161 (6, 1) - SBN not defined - 4 There are 4 errors are listed referring to the same type of errors, that is the SBN not defined.  Is there anyone here ever experienced this? And why is it these two PLCs also got problem for converting? Thanks all.
  21. Hi all. Firstly, I am not a programmer, I just need advice. We have HMI's using NS-Runtime and we keep getting this message. Now, this is why I am contacting you all. This has happened over 20 times on 20 different HMI's which we have replaced over the last 3 years. We have been told by our software supplier that the com port is "on it's way out". There is NO WAY over 20 hmi's over that period will deveop com port faults. So my question guys, can someone give me a few tips on what to try before I change HMI's over ervery dang mponth please? I am really at the end of my tether here. We connect our HMI's to the Omron PLC's via a standard serial. If we change to another HMI the machine communicates after obviously a long period of downtime. Should we reset the plc? I will take ANY advise please guys.
  22. Hi everyone, recently we got a complain about UM password protection in the CP1L. So our user intended to apply password to a CP1L PLC which doesn't have battery installed. They were testing to turning off the PLC for about a week. In the 8th day, they turned it on again and tried to upload the program from the PLC. But after they input the password, and error shows up which indicates whether the password is wrong, or already inputted wrong 5 times in a row. Further checking shows that A99.12 memory was turned on which indicates that wrong password has been inputted 5 times. This was not the actual case since we make sure no one was using the PLC in those 7 days. A99.12 by its nature is not a non-retain memory. Is it possible that during Power On, the memory is unstable that it turned On by itself? I know it can be the case on some areas like DM / WR and also the RTC memory. And since A99.12 is a Read-Only memory, we cannot use P_First_Cycle to ensure it's turned Off as what we used to do with A500.12 (Inhibit Output). Currently I'm testing it by myself, for 3 days had left the PLC Powered Off. If anyone had inputs about this please advice. Thank you
  23. I have  Modicon Micro TSX 3722 Version 1.0. while i am doing communication of PLC and PC i am getting communication Error.  I am not able to download Programm in PLC. Please find attached image of error which i am getting .   please help me to resolve it.   Thanks in advance. 
  24. CX process Error

    Dear All, Hi my name is arum. I am just starting my own project using CS1W-LCB01 and Omron CS1G CPU42 H, and i am using CX process to program the LCB01. The first time i try the LCB, it was doing well, no error occurred. But now, I have some problems here. 1. Internal board error always appear 2.Error 0A0D was detect when i am try to download the program to LCB. Iam using CX server communication driver. Because the problem always occurred, I clear the PLC memory then download again the PLC  configuration, and then restart the PLC configuration every time this problem occured After some times, it doing well. 3. But now, I even cant download the program because there always communication timed out Anyone had experience with this case. Please give me some advise. Thank you in advanced.