Search the Community
Showing results for tags 'cpu31'.
Found 3 results
Hi All, Just to verify if the "memory card" , in attached document Page 4 highlighted area , provides Omron CJ2M CPU21 to retain memory when powered off? If yes, for how long can the memory lasts without being charged? Isit capacitor or battery? Thanks in advance. Regards, Summer cj2m-cpu31.pdf
Hello everyone, I'm a student who recently started programming, and I could really use some help. I have a CPU-31 CJ2M OMRON PLC and a ADO41-v1 analogic card. I need help programming an analogic scale with a bipolar signal -10V to +10V to then control a drive, which will then control the motor. If anyone could help me out of give me some examples I'd be really thankfull. Thanks!
Hello, recently I tried to hook up a new CJ2M-CPU31 (built-in EIP Port) with a NS10-TV01-V2, which has an Ethernet/IP connection also. I made the simple setting as usual : 1. PLC, IP Address 192.168.250.1, Sub 255.255.255.0, FINS Node 1, no change to FINS/UDP parameter (Auto Dynamic Generation) 2. HMI, IP Address 192.168.250.2, Sub 255.255.255.0, FINS Node 2, Register the Host as EIP, SYSMAC-CJ2 mode with the PLC IP, Disables the Serial Port For some reason, there is no communication between NS and CJ2M (timeout error always occurs). I tried to re-register the Host as FINS, set the Node to 1, and also with no avail. I did try to connect the NS to a CP1L-EM with FINS Comm. and it works fine. Anything I did miss? Thanks in advance