Search the Community

Showing results for tags 'cp1e'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 55 results

  1. CP1E MODBUS Maximum Slave

    Hello everyone, so I noticed in Omron's CP1E manual, there are no certain info on maximum number of Modbus Slaves that can be attached, however the PLC itself able to connect to slave number 1 - 247 I have read from common MODBUS specs, that 32 slaves are the limit for most MODBUS connections. However there are also statements that with proper design (1/8 transceivers) that we can extend number of connected slaves to 256. Anyone have experience or info about this with Omron PLC? Thanks in advance
  2. Hi, i am start a aplication whith modbus for a simple comunication(read/write), some analogic imputs and outputs, whith, AB Micrologix 1500 LSP (1 com port Rs232) and whith a Omron PLC CP1L-L + CIF01 (rs232). I using CP1L like a master, but i try a lot of time and no read/ Write happens, just the recognition of Node (1) and the error code 88, no mather whith Function code i use. I use Modscan32 whith Micrologix 1500 and works fine, com settings are right to, i try 38k, 19,2k, and now 9,2k None stop bit 1, setting on CP1L are in serial Gateway. If i take the cable the reponse memory go to zero, so the communication is happen, just dont in right way. Is possible to use, RS232 whith CP1L, for Modbus communication right ? I already see PCMR code for modbus, but is to complex, for my aplication. No ofense. Someone can help me?
  3. Emails from a PLC

    Is it possible to send emails from the Ethernet port on either of these PLCs? It is a simple job apart from this - lights, push buttons, starters, relays and thge like. I do not want to spend big $$$ on a simple job that will not require a larger PLC.
  4. Dear all. because plc cpm1a is very old so i change new plc (cp1e), but when i change from cpm1a to cp1e. i have some errors when i convert programing of my machine from PLC CPM1A 40CDT1 to CP1E same funtion, this programing attack bellow. my machine have used CAM position and display speed machine on HMI, i expect people help me. thanks. Tube Filling.cxp
  5. 4 cpus cp1e and 1 hmi beijer over rs485

    Hi i want to connect all 4 cpus(cp1e 40s) to the hmi(beijer ixt10a) over rs485. I don't want the cpus to communicate each other, but i need all of them to exchange data with the hmi. How can i do that. Do i have to make master/slaves and from the polled plc to exchange all the data or if i don't set up anything in the plc's i can communicate each one with the hmi if i set the nodes to each plc and the hmi(for four controllers). I mean i will just wire them and set the hmi that there are 4 controllers, i will set node 0,1,2,3 and after set the hmi to these nodes. Is it going to be any problem between the plcs that aren't programmed to communicate each other and will be wired with rs485? Thanks